import torch from torchvision import transforms import json from PIL import Image, ImageDraw, ImageFont, ImageColor, ImageFilter import numpy as np from ..utility.utility import pil2tensor import folder_paths from comfy.utils import common_upscale def plot_coordinates_to_tensor(coordinates, height, width, bbox_height, bbox_width, size_multiplier, prompt): import matplotlib matplotlib.use('Agg') from matplotlib.backends.backend_agg import FigureCanvasAgg as FigureCanvas text_color = '#999999' bg_color = '#353535' matplotlib.pyplot.rcParams['text.color'] = text_color fig, ax = matplotlib.pyplot.subplots(figsize=(width/100, height/100), dpi=100) fig.patch.set_facecolor(bg_color) ax.set_facecolor(bg_color) ax.grid(color=text_color, linestyle='-', linewidth=0.5) ax.set_xlabel('x', color=text_color) ax.set_ylabel('y', color=text_color) for text in ax.get_xticklabels() + ax.get_yticklabels(): text.set_color(text_color) ax.set_title('position for: ' + prompt) ax.set_xlabel('X Coordinate') ax.set_ylabel('Y Coordinate') #ax.legend().remove() ax.set_xlim(0, width) # Set the x-axis to match the input latent width ax.set_ylim(height, 0) # Set the y-axis to match the input latent height, with (0,0) at top-left # Adjust the margins of the subplot matplotlib.pyplot.subplots_adjust(left=0.08, right=0.95, bottom=0.05, top=0.95, wspace=0.2, hspace=0.2) cmap = matplotlib.pyplot.get_cmap('rainbow') image_batch = [] canvas = FigureCanvas(fig) width, height = fig.get_size_inches() * fig.get_dpi() # Draw a box at each coordinate for i, ((x, y), size) in enumerate(zip(coordinates, size_multiplier)): color_index = i / (len(coordinates) - 1) color = cmap(color_index) draw_height = bbox_height * size draw_width = bbox_width * size rect = matplotlib.patches.Rectangle((x - draw_width/2, y - draw_height/2), draw_width, draw_height, linewidth=1, edgecolor=color, facecolor='none', alpha=0.5) ax.add_patch(rect) # Check if there is a next coordinate to draw an arrow to if i < len(coordinates) - 1: x1, y1 = coordinates[i] x2, y2 = coordinates[i + 1] ax.annotate("", xy=(x2, y2), xytext=(x1, y1), arrowprops=dict(arrowstyle="->", linestyle="-", lw=1, color=color, mutation_scale=20)) canvas.draw() image_np = np.frombuffer(canvas.tostring_rgb(), dtype='uint8').reshape(int(height), int(width), 3).copy() image_tensor = torch.from_numpy(image_np).float() / 255.0 image_tensor = image_tensor.unsqueeze(0) image_batch.append(image_tensor) matplotlib.pyplot.close(fig) image_batch_tensor = torch.cat(image_batch, dim=0) return image_batch_tensor class PlotCoordinates: @classmethod def INPUT_TYPES(s): return {"required": { "coordinates": ("STRING", {"forceInput": True}), "text": ("STRING", {"default": 'title', "multiline": False}), "width": ("INT", {"default": 512, "min": 8, "max": 4096, "step": 8}), "height": ("INT", {"default": 512, "min": 8, "max": 4096, "step": 8}), "bbox_width": ("INT", {"default": 128, "min": 8, "max": 4096, "step": 8}), "bbox_height": ("INT", {"default": 128, "min": 8, "max": 4096, "step": 8}), }, "optional": {"size_multiplier": ("FLOAT", {"default": [1.0], "forceInput": True})}, } RETURN_TYPES = ("IMAGE", "INT", "INT", "INT", "INT",) RETURN_NAMES = ("images", "width", "height", "bbox_width", "bbox_height",) FUNCTION = "append" CATEGORY = "KJNodes/experimental" DESCRIPTION = """ Plots coordinates to sequence of images using Matplotlib. """ def append(self, coordinates, text, width, height, bbox_width, bbox_height, size_multiplier=[1.0]): coordinates = json.loads(coordinates.replace("'", '"')) coordinates = [(coord['x'], coord['y']) for coord in coordinates] batch_size = len(coordinates) if len(size_multiplier) != batch_size: size_multiplier = size_multiplier * (batch_size // len(size_multiplier)) + size_multiplier[:batch_size % len(size_multiplier)] plot_image_tensor = plot_coordinates_to_tensor(coordinates, height, width, bbox_height, bbox_width, size_multiplier, text) return (plot_image_tensor, width, height, bbox_width, bbox_height) class SplineEditor: @classmethod def INPUT_TYPES(cls): return { "required": { "points_store": ("STRING", {"multiline": False}), "coordinates": ("STRING", {"multiline": False}), "mask_width": ("INT", {"default": 512, "min": 8, "max": 4096, "step": 8}), "mask_height": ("INT", {"default": 512, "min": 8, "max": 4096, "step": 8}), "points_to_sample": ("INT", {"default": 16, "min": 2, "max": 1000, "step": 1}), "sampling_method": ( [ 'path', 'time', 'controlpoints' ], { "default": 'time' }), "interpolation": ( [ 'cardinal', 'monotone', 'basis', 'linear', 'step-before', 'step-after', 'polar', 'polar-reverse', ], { "default": 'cardinal' }), "tension": ("FLOAT", {"default": 0.5, "min": 0.0, "max": 1.0, "step": 0.01}), "repeat_output": ("INT", {"default": 1, "min": 1, "max": 4096, "step": 1}), "float_output_type": ( [ 'list', 'pandas series', 'tensor', ], { "default": 'list' }), }, "optional": { "min_value": ("FLOAT", {"default": 0.0, "min": -10000.0, "max": 10000.0, "step": 0.01}), "max_value": ("FLOAT", {"default": 1.0, "min": -10000.0, "max": 10000.0, "step": 0.01}), } } RETURN_TYPES = ("MASK", "STRING", "FLOAT", "INT", "STRING",) RETURN_NAMES = ("mask", "coord_str", "float", "count", "normalized_str",) FUNCTION = "splinedata" CATEGORY = "KJNodes/weights" DESCRIPTION = """ # WORK IN PROGRESS Do not count on this as part of your workflow yet, probably contains lots of bugs and stability is not guaranteed!! ## Graphical editor to create values for various ## schedules and/or mask batches. **Shift + click** to add control point at end. **Ctrl + click** to add control point (subdivide) between two points. **Right click on a point** to delete it. Note that you can't delete from start/end. Right click on canvas for context menu: These are purely visual options, doesn't affect the output: - Toggle handles visibility - Display sample points: display the points to be returned. **points_to_sample** value sets the number of samples returned from the **drawn spline itself**, this is independent from the actual control points, so the interpolation type matters. sampling_method: - time: samples along the time axis, used for schedules - path: samples along the path itself, useful for coordinates output types: - mask batch example compatible nodes: anything that takes masks - list of floats example compatible nodes: IPAdapter weights - pandas series example compatible nodes: anything that takes Fizz' nodes Batch Value Schedule - torch tensor example compatible nodes: unknown """ def splinedata(self, mask_width, mask_height, coordinates, float_output_type, interpolation, points_to_sample, sampling_method, points_store, tension, repeat_output, min_value=0.0, max_value=1.0): coordinates = json.loads(coordinates) normalized = [] normalized_y_values = [] for coord in coordinates: coord['x'] = int(round(coord['x'])) coord['y'] = int(round(coord['y'])) norm_x = (1.0 - (coord['x'] / mask_height) - 0.0) * (max_value - min_value) + min_value norm_y = (1.0 - (coord['y'] / mask_height) - 0.0) * (max_value - min_value) + min_value normalized_y_values.append(norm_y) normalized.append({'x':norm_x, 'y':norm_y}) if float_output_type == 'list': out_floats = normalized_y_values * repeat_output elif float_output_type == 'pandas series': try: import pandas as pd except: raise Exception("MaskOrImageToWeight: pandas is not installed. Please install pandas to use this output_type") out_floats = pd.Series(normalized_y_values * repeat_output), elif float_output_type == 'tensor': out_floats = torch.tensor(normalized_y_values * repeat_output, dtype=torch.float32) # Create a color map for grayscale intensities color_map = lambda y: torch.full((mask_height, mask_width, 3), y, dtype=torch.float32) # Create image tensors for each normalized y value mask_tensors = [color_map(y) for y in normalized_y_values] masks_out = torch.stack(mask_tensors) masks_out = masks_out.repeat(repeat_output, 1, 1, 1) masks_out = masks_out.mean(dim=-1) return (masks_out, json.dumps(coordinates), out_floats, len(out_floats) , json.dumps(normalized)) class CreateShapeMaskOnPath: RETURN_TYPES = ("MASK", "MASK",) RETURN_NAMES = ("mask", "mask_inverted",) FUNCTION = "createshapemask" CATEGORY = "KJNodes/masking/generate" DESCRIPTION = """ Creates a mask or batch of masks with the specified shape. Locations are center locations. """ @classmethod def INPUT_TYPES(s): return { "required": { "shape": ( [ 'circle', 'square', 'triangle', ], { "default": 'circle' }), "coordinates": ("STRING", {"forceInput": True}), "frame_width": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "frame_height": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "shape_width": ("INT", {"default": 128,"min": 8, "max": 4096, "step": 1}), "shape_height": ("INT", {"default": 128,"min": 8, "max": 4096, "step": 1}), }, "optional": { "size_multiplier": ("FLOAT", {"default": [1.0], "forceInput": True}), } } def createshapemask(self, coordinates, frame_width, frame_height, shape_width, shape_height, shape, size_multiplier=[1.0]): # Define the number of images in the batch coordinates = coordinates.replace("'", '"') coordinates = json.loads(coordinates) batch_size = len(coordinates) out = [] color = "white" if len(size_multiplier) != batch_size: size_multiplier = size_multiplier * (batch_size // len(size_multiplier)) + size_multiplier[:batch_size % len(size_multiplier)] for i, coord in enumerate(coordinates): image = Image.new("RGB", (frame_width, frame_height), "black") draw = ImageDraw.Draw(image) # Calculate the size for this frame and ensure it's not less than 0 current_width = max(0, shape_width + i * size_multiplier[i]) current_height = max(0, shape_height + i * size_multiplier[i]) location_x = coord['x'] location_y = coord['y'] if shape == 'circle' or shape == 'square': # Define the bounding box for the shape left_up_point = (location_x - current_width // 2, location_y - current_height // 2) right_down_point = (location_x + current_width // 2, location_y + current_height // 2) two_points = [left_up_point, right_down_point] if shape == 'circle': draw.ellipse(two_points, fill=color) elif shape == 'square': draw.rectangle(two_points, fill=color) elif shape == 'triangle': # Define the points for the triangle left_up_point = (location_x - current_width // 2, location_y + current_height // 2) # bottom left right_down_point = (location_x + current_width // 2, location_y + current_height // 2) # bottom right top_point = (location_x, location_y - current_height // 2) # top point draw.polygon([top_point, left_up_point, right_down_point], fill=color) image = pil2tensor(image) mask = image[:, :, :, 0] out.append(mask) outstack = torch.cat(out, dim=0) return (outstack, 1.0 - outstack,) class CreateShapeImageOnPath: RETURN_TYPES = ("IMAGE", "MASK",) RETURN_NAMES = ("image","mask", ) FUNCTION = "createshapemask" CATEGORY = "KJNodes/image" DESCRIPTION = """ Creates an image or batch of images with the specified shape. Locations are center locations. """ @classmethod def INPUT_TYPES(s): return { "required": { "shape": ( [ 'circle', 'square', 'triangle', ], { "default": 'circle' }), "coordinates": ("STRING", {"forceInput": True}), "frame_width": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "frame_height": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "shape_width": ("INT", {"default": 128,"min": 8, "max": 4096, "step": 1}), "shape_height": ("INT", {"default": 128,"min": 8, "max": 4096, "step": 1}), "shape_color": ("STRING", {"default": 'white'}), "bg_color": ("STRING", {"default": 'black'}), "blur_radius": ("FLOAT", {"default": 0.0, "min": 0.0, "max": 100, "step": 0.1}), "intensity": ("FLOAT", {"default": 1.0, "min": 0.01, "max": 100.0, "step": 0.01}), }, "optional": { "size_multiplier": ("FLOAT", {"default": [1.0], "forceInput": True}), } } def createshapemask(self, coordinates, frame_width, frame_height, shape_width, shape_height, shape_color, bg_color, blur_radius, shape, intensity, size_multiplier=[1.0]): # Define the number of images in the batch coordinates = coordinates.replace("'", '"') coordinates = json.loads(coordinates) batch_size = len(coordinates) images_list = [] masks_list = [] if len(size_multiplier) != batch_size: size_multiplier = size_multiplier * (batch_size // len(size_multiplier)) + size_multiplier[:batch_size % len(size_multiplier)] for i, coord in enumerate(coordinates): image = Image.new("RGB", (frame_width, frame_height), bg_color) draw = ImageDraw.Draw(image) # Calculate the size for this frame and ensure it's not less than 0 current_width = max(0, shape_width + i * size_multiplier[i]) current_height = max(0, shape_height + i * size_multiplier[i]) location_x = coord['x'] location_y = coord['y'] if shape == 'circle' or shape == 'square': # Define the bounding box for the shape left_up_point = (location_x - current_width // 2, location_y - current_height // 2) right_down_point = (location_x + current_width // 2, location_y + current_height // 2) two_points = [left_up_point, right_down_point] if shape == 'circle': draw.ellipse(two_points, fill=shape_color) elif shape == 'square': draw.rectangle(two_points, fill=shape_color) elif shape == 'triangle': # Define the points for the triangle left_up_point = (location_x - current_width // 2, location_y + current_height // 2) # bottom left right_down_point = (location_x + current_width // 2, location_y + current_height // 2) # bottom right top_point = (location_x, location_y - current_height // 2) # top point draw.polygon([top_point, left_up_point, right_down_point], fill=shape_color) if blur_radius != 0: image = image.filter(ImageFilter.GaussianBlur(blur_radius)) image = pil2tensor(image) image = image * intensity mask = image[:, :, :, 0] masks_list.append(mask) images_list.append(image) out_images = torch.cat(images_list, dim=0).cpu().float() out_masks = torch.cat(masks_list, dim=0) return (out_images, out_masks) class CreateTextOnPath: RETURN_TYPES = ("IMAGE", "MASK", "MASK",) RETURN_NAMES = ("image", "mask", "mask_inverted",) FUNCTION = "createtextmask" CATEGORY = "KJNodes/masking/generate" DESCRIPTION = """ Creates a mask or batch of masks with the specified text. Locations are center locations. """ @classmethod def INPUT_TYPES(s): return { "required": { "coordinates": ("STRING", {"forceInput": True}), "text": ("STRING", {"default": 'text', "multiline": True}), "frame_width": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "frame_height": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "font": (folder_paths.get_filename_list("kjnodes_fonts"), ), "font_size": ("INT", {"default": 42}), "alignment": ( [ 'left', 'center', 'right' ], {"default": 'center'} ), "text_color": ("STRING", {"default": 'white'}), }, "optional": { "size_multiplier": ("FLOAT", {"default": [1.0], "forceInput": True}), } } def createtextmask(self, coordinates, frame_width, frame_height, font, font_size, text, text_color, alignment, size_multiplier=[1.0]): coordinates = coordinates.replace("'", '"') coordinates = json.loads(coordinates) batch_size = len(coordinates) mask_list = [] image_list = [] color = text_color font_path = folder_paths.get_full_path("kjnodes_fonts", font) if len(size_multiplier) != batch_size: size_multiplier = size_multiplier * (batch_size // len(size_multiplier)) + size_multiplier[:batch_size % len(size_multiplier)] for i, coord in enumerate(coordinates): image = Image.new("RGB", (frame_width, frame_height), "black") draw = ImageDraw.Draw(image) lines = text.split('\n') # Split the text into lines # Apply the size multiplier to the font size for this iteration current_font_size = int(font_size * size_multiplier[i]) current_font = ImageFont.truetype(font_path, current_font_size) line_heights = [current_font.getbbox(line)[3] for line in lines] # List of line heights total_text_height = sum(line_heights) # Total height of text block # Calculate the starting Y position to center the block of text start_y = coord['y'] - total_text_height // 2 for j, line in enumerate(lines): text_width, text_height = current_font.getbbox(line)[2], line_heights[j] if alignment == 'left': location_x = coord['x'] elif alignment == 'center': location_x = int(coord['x'] - text_width // 2) elif alignment == 'right': location_x = int(coord['x'] - text_width) location_y = int(start_y + sum(line_heights[:j])) text_position = (location_x, location_y) # Draw the text try: draw.text(text_position, line, fill=color, font=current_font, features=['-liga']) except: draw.text(text_position, line, fill=color, font=current_font) image = pil2tensor(image) non_black_pixels = (image > 0).any(dim=-1) mask = non_black_pixels.to(image.dtype) mask_list.append(mask) image_list.append(image) out_images = torch.cat(image_list, dim=0).cpu().float() out_masks = torch.cat(mask_list, dim=0) return (out_images, out_masks, 1.0 - out_masks,) class CreateGradientFromCoords: RETURN_TYPES = ("IMAGE", ) RETURN_NAMES = ("image", ) FUNCTION = "generate" CATEGORY = "KJNodes/image" DESCRIPTION = """ Creates a gradient image from coordinates. """ @classmethod def INPUT_TYPES(s): return { "required": { "coordinates": ("STRING", {"forceInput": True}), "frame_width": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "frame_height": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "start_color": ("STRING", {"default": 'white'}), "end_color": ("STRING", {"default": 'black'}), "multiplier": ("FLOAT", {"default": 1.0, "min": 0.01, "max": 100.0, "step": 0.01}), }, } def generate(self, coordinates, frame_width, frame_height, start_color, end_color, multiplier): # Parse the coordinates coordinates = json.loads(coordinates.replace("'", '"')) # Create an image image = Image.new("RGB", (frame_width, frame_height)) draw = ImageDraw.Draw(image) # Extract start and end points for the gradient start_coord = coordinates[0] end_coord = coordinates[1] start_color = ImageColor.getrgb(start_color) end_color = ImageColor.getrgb(end_color) # Calculate the gradient direction (vector) gradient_direction = (end_coord['x'] - start_coord['x'], end_coord['y'] - start_coord['y']) gradient_length = (gradient_direction[0] ** 2 + gradient_direction[1] ** 2) ** 0.5 # Iterate over each pixel in the image for y in range(frame_height): for x in range(frame_width): # Calculate the projection of the point on the gradient line point_vector = (x - start_coord['x'], y - start_coord['y']) projection = (point_vector[0] * gradient_direction[0] + point_vector[1] * gradient_direction[1]) / gradient_length projection = max(min(projection, gradient_length), 0) # Clamp the projection value # Calculate the blend factor for the current pixel blend = projection * multiplier / gradient_length # Determine the color of the current pixel color = ( int(start_color[0] + (end_color[0] - start_color[0]) * blend), int(start_color[1] + (end_color[1] - start_color[1]) * blend), int(start_color[2] + (end_color[2] - start_color[2]) * blend) ) # Set the pixel color draw.point((x, y), fill=color) # Convert the PIL image to a tensor (assuming such a function exists in your context) image_tensor = pil2tensor(image) return (image_tensor,) class GradientToFloat: RETURN_TYPES = ("FLOAT", "FLOAT",) RETURN_NAMES = ("float_x", "float_y", ) FUNCTION = "sample" CATEGORY = "KJNodes/image" DESCRIPTION = """ Calculates list of floats from image. """ @classmethod def INPUT_TYPES(s): return { "required": { "image": ("IMAGE", ), "steps": ("INT", {"default": 10, "min": 2, "max": 10000, "step": 1}), }, } def sample(self, image, steps): # Assuming image is a tensor with shape [B, H, W, C] B, H, W, C = image.shape # Sample along the width axis (W) w_intervals = torch.linspace(0, W - 1, steps=steps, dtype=torch.int64) # Assuming we're sampling from the first batch and the first channel w_sampled = image[0, :, w_intervals, 0] # Sample along the height axis (H) h_intervals = torch.linspace(0, H - 1, steps=steps, dtype=torch.int64) # Assuming we're sampling from the first batch and the first channel h_sampled = image[0, h_intervals, :, 0] # Taking the mean across the height for width sampling, and across the width for height sampling w_values = w_sampled.mean(dim=0).tolist() h_values = h_sampled.mean(dim=1).tolist() return (w_values, h_values) class MaskOrImageToWeight: @classmethod def INPUT_TYPES(s): return { "required": { "output_type": ( [ 'list', 'pandas series', 'tensor', 'string' ], { "default": 'list' }), }, "optional": { "images": ("IMAGE",), "masks": ("MASK",), }, } RETURN_TYPES = ("FLOAT", "STRING",) FUNCTION = "execute" CATEGORY = "KJNodes/weights" DESCRIPTION = """ Gets the mean values from mask or image batch and returns that as the selected output type. """ def execute(self, output_type, images=None, masks=None): mean_values = [] if masks is not None and images is None: for mask in masks: mean_values.append(mask.mean().item()) elif masks is None and images is not None: for image in images: mean_values.append(image.mean().item()) elif masks is not None and images is not None: raise Exception("MaskOrImageToWeight: Use either mask or image input only.") # Convert mean_values to the specified output_type if output_type == 'list': out = mean_values elif output_type == 'pandas series': try: import pandas as pd except: raise Exception("MaskOrImageToWeight: pandas is not installed. Please install pandas to use this output_type") out = pd.Series(mean_values), elif output_type == 'tensor': out = torch.tensor(mean_values, dtype=torch.float32), return (out, [str(value) for value in mean_values],) class WeightScheduleConvert: @classmethod def INPUT_TYPES(s): return { "required": { "input_values": ("FLOAT", {"default": 0.0, "forceInput": True}), "output_type": ( [ 'match_input', 'list', 'pandas series', 'tensor', ], { "default": 'list' }), "invert": ("BOOLEAN", {"default": False}), "repeat": ("INT", {"default": 1,"min": 1, "max": 255, "step": 1}), }, "optional": { "remap_to_frames": ("INT", {"default": 0}), "interpolation_curve": ("FLOAT", {"forceInput": True}), "remap_values": ("BOOLEAN", {"default": False}), "remap_min": ("FLOAT", {"default": 0.0, "min": -100000, "max": 100000.0, "step": 0.01}), "remap_max": ("FLOAT", {"default": 1.0, "min": -100000, "max": 100000.0, "step": 0.01}), }, } RETURN_TYPES = ("FLOAT", "STRING", "INT",) FUNCTION = "execute" CATEGORY = "KJNodes/weights" DESCRIPTION = """ Converts different value lists/series to another type. """ def detect_input_type(self, input_values): import pandas as pd if isinstance(input_values, list): return 'list' elif isinstance(input_values, pd.Series): return 'pandas series' elif isinstance(input_values, torch.Tensor): return 'tensor' else: raise ValueError("Unsupported input type") def execute(self, input_values, output_type, invert, repeat, remap_to_frames=0, interpolation_curve=None, remap_min=0.0, remap_max=1.0, remap_values=False): import pandas as pd input_type = self.detect_input_type(input_values) if input_type == 'pandas series': float_values = input_values.tolist() elif input_type == 'tensor': float_values = input_values else: float_values = input_values if invert: float_values = [1 - value for value in float_values] if interpolation_curve is not None: interpolated_pattern = [] orig_float_values = float_values for value in interpolation_curve: min_val = min(orig_float_values) max_val = max(orig_float_values) # Normalize the values to [0, 1] normalized_values = [(value - min_val) / (max_val - min_val) for value in orig_float_values] # Interpolate the normalized values to the new frame count remapped_float_values = np.interp(np.linspace(0, 1, int(remap_to_frames * value)), np.linspace(0, 1, len(normalized_values)), normalized_values).tolist() interpolated_pattern.extend(remapped_float_values) float_values = interpolated_pattern else: # Remap float_values to match target_frame_amount if remap_to_frames > 0 and remap_to_frames != len(float_values): min_val = min(float_values) max_val = max(float_values) # Normalize the values to [0, 1] normalized_values = [(value - min_val) / (max_val - min_val) for value in float_values] # Interpolate the normalized values to the new frame count float_values = np.interp(np.linspace(0, 1, remap_to_frames), np.linspace(0, 1, len(normalized_values)), normalized_values).tolist() float_values = float_values * repeat if remap_values: float_values = self.remap_values(float_values, remap_min, remap_max) if output_type == 'list': out = float_values, elif output_type == 'pandas series': out = pd.Series(float_values), elif output_type == 'tensor': if input_type == 'pandas series': out = torch.tensor(float_values.values, dtype=torch.float32), else: out = torch.tensor(float_values, dtype=torch.float32), elif output_type == 'match_input': out = float_values, return (out, [str(value) for value in float_values], [int(value) for value in float_values]) def remap_values(self, values, target_min, target_max): # Determine the current range current_min = min(values) current_max = max(values) current_range = current_max - current_min # Determine the target range target_range = target_max - target_min # Perform the linear interpolation for each value remapped_values = [(value - current_min) / current_range * target_range + target_min for value in values] return remapped_values class FloatToMask: @classmethod def INPUT_TYPES(s): return { "required": { "input_values": ("FLOAT", {"forceInput": True, "default": 0}), "width": ("INT", {"default": 100, "min": 1}), "height": ("INT", {"default": 100, "min": 1}), }, } RETURN_TYPES = ("MASK",) FUNCTION = "execute" CATEGORY = "KJNodes/masking/generate" DESCRIPTION = """ Generates a batch of masks based on the input float values. The batch size is determined by the length of the input float values. Each mask is generated with the specified width and height. """ def execute(self, input_values, width, height): import pandas as pd # Ensure input_values is a list if isinstance(input_values, (float, int)): input_values = [input_values] elif isinstance(input_values, pd.Series): input_values = input_values.tolist() elif isinstance(input_values, list) and all(isinstance(item, list) for item in input_values): input_values = [item for sublist in input_values for item in sublist] # Generate a batch of masks based on the input_values masks = [] for value in input_values: # Assuming value is a float between 0 and 1 representing the mask's intensity mask = torch.ones((height, width), dtype=torch.float32) * value masks.append(mask) masks_out = torch.stack(masks, dim=0) return(masks_out,) class WeightScheduleExtend: @classmethod def INPUT_TYPES(s): return { "required": { "input_values_1": ("FLOAT", {"default": 0.0, "forceInput": True}), "input_values_2": ("FLOAT", {"default": 0.0, "forceInput": True}), "output_type": ( [ 'match_input', 'list', 'pandas series', 'tensor', ], { "default": 'match_input' }), }, } RETURN_TYPES = ("FLOAT",) FUNCTION = "execute" CATEGORY = "KJNodes/weights" DESCRIPTION = """ Extends, and converts if needed, different value lists/series """ def detect_input_type(self, input_values): import pandas as pd if isinstance(input_values, list): return 'list' elif isinstance(input_values, pd.Series): return 'pandas series' elif isinstance(input_values, torch.Tensor): return 'tensor' else: raise ValueError("Unsupported input type") def execute(self, input_values_1, input_values_2, output_type): import pandas as pd input_type_1 = self.detect_input_type(input_values_1) input_type_2 = self.detect_input_type(input_values_2) # Convert input_values_2 to the same format as input_values_1 if they do not match if not input_type_1 == input_type_2: print("Converting input_values_2 to the same format as input_values_1") if input_type_1 == 'pandas series': # Convert input_values_2 to a pandas Series float_values_2 = pd.Series(input_values_2) elif input_type_1 == 'tensor': # Convert input_values_2 to a tensor float_values_2 = torch.tensor(input_values_2, dtype=torch.float32) else: print("Input types match, no conversion needed") # If the types match, no conversion is needed float_values_2 = input_values_2 float_values = input_values_1 + float_values_2 if output_type == 'list': return float_values, elif output_type == 'pandas series': return pd.Series(float_values), elif output_type == 'tensor': if input_type_1 == 'pandas series': return torch.tensor(float_values.values, dtype=torch.float32), else: return torch.tensor(float_values, dtype=torch.float32), elif output_type == 'match_input': return float_values, else: raise ValueError(f"Unsupported output_type: {output_type}") class FloatToSigmas: @classmethod def INPUT_TYPES(s): return {"required": { "float_list": ("FLOAT", {"default": 0.0, "forceInput": True}), } } RETURN_TYPES = ("SIGMAS",) RETURN_NAMES = ("SIGMAS",) CATEGORY = "KJNodes/noise" FUNCTION = "customsigmas" DESCRIPTION = """ Creates a sigmas tensor from list of float values. """ def customsigmas(self, float_list): return torch.tensor(float_list, dtype=torch.float32), class GLIGENTextBoxApplyBatchCoords: @classmethod def INPUT_TYPES(s): return {"required": {"conditioning_to": ("CONDITIONING", ), "latents": ("LATENT", ), "clip": ("CLIP", ), "gligen_textbox_model": ("GLIGEN", ), "coordinates": ("STRING", {"forceInput": True}), "text": ("STRING", {"multiline": True}), "width": ("INT", {"default": 128, "min": 8, "max": 4096, "step": 8}), "height": ("INT", {"default": 128, "min": 8, "max": 4096, "step": 8}), }, "optional": {"size_multiplier": ("FLOAT", {"default": [1.0], "forceInput": True})}, } RETURN_TYPES = ("CONDITIONING", "IMAGE", ) RETURN_NAMES = ("conditioning", "coord_preview", ) FUNCTION = "append" CATEGORY = "KJNodes/experimental" DESCRIPTION = """ This node allows scheduling GLIGEN text box positions in a batch, to be used with AnimateDiff-Evolved. Intended to pair with the Spline Editor -node. GLIGEN model can be downloaded through the Manage's "Install Models" menu. Or directly from here: https://huggingface.co/comfyanonymous/GLIGEN_pruned_safetensors/tree/main Inputs: - **latents** input is used to calculate batch size - **clip** is your standard text encoder, use same as for the main prompt - **gligen_textbox_model** connects to GLIGEN Loader - **coordinates** takes a json string of points, directly compatible with the spline editor node. - **text** is the part of the prompt to set position for - **width** and **height** are the size of the GLIGEN bounding box Outputs: - **conditioning** goes between to clip text encode and the sampler - **coord_preview** is an optional preview of the coordinates and bounding boxes. """ def append(self, latents, coordinates, conditioning_to, clip, gligen_textbox_model, text, width, height, size_multiplier=[1.0]): coordinates = json.loads(coordinates.replace("'", '"')) coordinates = [(coord['x'], coord['y']) for coord in coordinates] batch_size = sum(tensor.size(0) for tensor in latents.values()) if len(coordinates) != batch_size: print("GLIGENTextBoxApplyBatchCoords WARNING: The number of coordinates does not match the number of latents") c = [] _, cond_pooled = clip.encode_from_tokens(clip.tokenize(text), return_pooled=True) for t in conditioning_to: n = [t[0], t[1].copy()] position_params_batch = [[] for _ in range(batch_size)] # Initialize a list of empty lists for each batch item if len(size_multiplier) != batch_size: size_multiplier = size_multiplier * (batch_size // len(size_multiplier)) + size_multiplier[:batch_size % len(size_multiplier)] for i in range(batch_size): x_position, y_position = coordinates[i] position_param = (cond_pooled, int((height // 8) * size_multiplier[i]), int((width // 8) * size_multiplier[i]), (y_position - height // 2) // 8, (x_position - width // 2) // 8) position_params_batch[i].append(position_param) # Append position_param to the correct sublist prev = [] if "gligen" in n[1]: prev = n[1]['gligen'][2] else: prev = [[] for _ in range(batch_size)] # Concatenate prev and position_params_batch, ensuring both are lists of lists # and each sublist corresponds to a batch item combined_position_params = [prev_item + batch_item for prev_item, batch_item in zip(prev, position_params_batch)] n[1]['gligen'] = ("position_batched", gligen_textbox_model, combined_position_params) c.append(n) image_height = latents['samples'].shape[-2] * 8 image_width = latents['samples'].shape[-1] * 8 plot_image_tensor = plot_coordinates_to_tensor(coordinates, image_height, image_width, height, width, size_multiplier, text) return (c, plot_image_tensor,) class CreateInstanceDiffusionTracking: RETURN_TYPES = ("TRACKING", "STRING", "INT", "INT", "INT", "INT",) RETURN_NAMES = ("tracking", "prompt", "width", "height", "bbox_width", "bbox_height",) FUNCTION = "tracking" CATEGORY = "KJNodes/InstanceDiffusion" DESCRIPTION = """ Creates tracking data to be used with InstanceDiffusion: https://github.com/logtd/ComfyUI-InstanceDiffusion InstanceDiffusion prompt format: "class_id.class_name": "prompt", for example: "1.head": "((head))", """ @classmethod def INPUT_TYPES(s): return { "required": { "coordinates": ("STRING", {"forceInput": True}), "width": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "height": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "bbox_width": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "bbox_height": ("INT", {"default": 512,"min": 16, "max": 4096, "step": 1}), "class_name": ("STRING", {"default": "class_name"}), "class_id": ("INT", {"default": 0,"min": 0, "max": 255, "step": 1}), "prompt": ("STRING", {"default": "prompt", "multiline": True}), }, "optional": { "size_multiplier": ("FLOAT", {"default": [1.0], "forceInput": True}), "fit_in_frame": ("BOOLEAN", {"default": True}), } } def tracking(self, coordinates, class_name, class_id, width, height, bbox_width, bbox_height, prompt, size_multiplier=[1.0], fit_in_frame=True): # Define the number of images in the batch coordinates = coordinates.replace("'", '"') coordinates = json.loads(coordinates) tracked = {} tracked[class_name] = {} batch_size = len(coordinates) # Initialize a list to hold the coordinates for the current ID id_coordinates = [] if len(size_multiplier) != batch_size: size_multiplier = size_multiplier * (batch_size // len(size_multiplier)) + size_multiplier[:batch_size % len(size_multiplier)] for i, coord in enumerate(coordinates): x = coord['x'] y = coord['y'] adjusted_bbox_width = bbox_width * size_multiplier[i] adjusted_bbox_height = bbox_height * size_multiplier[i] # Calculate the top left and bottom right coordinates top_left_x = x - adjusted_bbox_width // 2 top_left_y = y - adjusted_bbox_height // 2 bottom_right_x = x + adjusted_bbox_width // 2 bottom_right_y = y + adjusted_bbox_height // 2 if fit_in_frame: # Clip the coordinates to the frame boundaries top_left_x = max(0, top_left_x) top_left_y = max(0, top_left_y) bottom_right_x = min(width, bottom_right_x) bottom_right_y = min(height, bottom_right_y) # Ensure width and height are positive adjusted_bbox_width = max(1, bottom_right_x - top_left_x) adjusted_bbox_height = max(1, bottom_right_y - top_left_y) # Update the coordinates with the new width and height bottom_right_x = top_left_x + adjusted_bbox_width bottom_right_y = top_left_y + adjusted_bbox_height # Append the top left and bottom right coordinates to the list for the current ID id_coordinates.append([top_left_x, top_left_y, bottom_right_x, bottom_right_y, width, height]) class_id = int(class_id) # Assign the list of coordinates to the specified ID within the class_id dictionary tracked[class_name][class_id] = id_coordinates prompt_string = "" for class_name, class_data in tracked.items(): for class_id in class_data.keys(): class_id_str = str(class_id) # Use the incoming prompt for each class name and ID prompt_string += f'"{class_id_str}.{class_name}": "({prompt})",\n' # Remove the last comma and newline prompt_string = prompt_string.rstrip(",\n") return (tracked, prompt_string, width, height, bbox_width, bbox_height) class AppendInstanceDiffusionTracking: RETURN_TYPES = ("TRACKING", "STRING",) RETURN_NAMES = ("tracking", "prompt",) FUNCTION = "append" CATEGORY = "KJNodes/InstanceDiffusion" DESCRIPTION = """ Appends tracking data to be used with InstanceDiffusion: https://github.com/logtd/ComfyUI-InstanceDiffusion """ @classmethod def INPUT_TYPES(s): return { "required": { "tracking_1": ("TRACKING", {"forceInput": True}), "tracking_2": ("TRACKING", {"forceInput": True}), }, "optional": { "prompt_1": ("STRING", {"default": "", "forceInput": True}), "prompt_2": ("STRING", {"default": "", "forceInput": True}), } } def append(self, tracking_1, tracking_2, prompt_1="", prompt_2=""): tracking_copy = tracking_1.copy() # Check for existing class names and class IDs, and raise an error if they exist for class_name, class_data in tracking_2.items(): if class_name not in tracking_copy: tracking_copy[class_name] = class_data else: # If the class name exists, merge the class data from tracking_2 into tracking_copy # This will add new class IDs under the same class name without raising an error tracking_copy[class_name].update(class_data) prompt_string = prompt_1 + "," + prompt_2 return (tracking_copy, prompt_string) class InterpolateCoords: RETURN_TYPES = ("STRING",) RETURN_NAMES = ("coordinates",) FUNCTION = "interpolate" CATEGORY = "KJNodes/experimental" DESCRIPTION = """ Interpolates coordinates based on a curve. """ @classmethod def INPUT_TYPES(s): return { "required": { "coordinates": ("STRING", {"forceInput": True}), "interpolation_curve": ("FLOAT", {"forceInput": True}), }, } def interpolate(self, coordinates, interpolation_curve): # Parse the JSON string to get the list of coordinates coordinates = json.loads(coordinates.replace("'", '"')) # Convert the list of dictionaries to a list of (x, y) tuples for easier processing coordinates = [(coord['x'], coord['y']) for coord in coordinates] # Calculate the total length of the original path path_length = sum(np.linalg.norm(np.array(coordinates[i]) - np.array(coordinates[i-1])) for i in range(1, len(coordinates))) # Initialize variables for interpolation interpolated_coords = [] current_length = 0 current_index = 0 # Iterate over the normalized curve for normalized_length in interpolation_curve: target_length = normalized_length * path_length # Convert to the original scale while current_index < len(coordinates) - 1: segment_start, segment_end = np.array(coordinates[current_index]), np.array(coordinates[current_index + 1]) segment_length = np.linalg.norm(segment_end - segment_start) if current_length + segment_length >= target_length: break current_length += segment_length current_index += 1 # Interpolate between the last two points if current_index < len(coordinates) - 1: p1, p2 = np.array(coordinates[current_index]), np.array(coordinates[current_index + 1]) segment_length = np.linalg.norm(p2 - p1) if segment_length > 0: t = (target_length - current_length) / segment_length interpolated_point = p1 + t * (p2 - p1) interpolated_coords.append(interpolated_point.tolist()) else: interpolated_coords.append(p1.tolist()) else: # If the target_length is at or beyond the end of the path, add the last coordinate interpolated_coords.append(coordinates[-1]) # Convert back to string format if necessary interpolated_coords_str = "[" + ", ".join([f"{{'x': {round(coord[0])}, 'y': {round(coord[1])}}}" for coord in interpolated_coords]) + "]" print(interpolated_coords_str) return (interpolated_coords_str,) class DrawInstanceDiffusionTracking: RETURN_TYPES = ("IMAGE",) RETURN_NAMES = ("image", ) FUNCTION = "draw" CATEGORY = "KJNodes/InstanceDiffusion" DESCRIPTION = """ Draws the tracking data from CreateInstanceDiffusionTracking -node. """ @classmethod def INPUT_TYPES(s): return { "required": { "image": ("IMAGE", ), "tracking": ("TRACKING", {"forceInput": True}), "box_line_width": ("INT", {"default": 2, "min": 1, "max": 10, "step": 1}), "draw_text": ("BOOLEAN", {"default": True}), "font": (folder_paths.get_filename_list("kjnodes_fonts"), ), "font_size": ("INT", {"default": 20}), }, } def draw(self, image, tracking, box_line_width, draw_text, font, font_size): import matplotlib.cm as cm modified_images = [] colormap = cm.get_cmap('rainbow', len(tracking)) if draw_text: font_path = folder_paths.get_full_path("kjnodes_fonts", font) font = ImageFont.truetype(font_path, font_size) # Iterate over each image in the batch for i in range(image.shape[0]): # Extract the current image and convert it to a PIL image current_image = image[i, :, :, :].permute(2, 0, 1) pil_image = transforms.ToPILImage()(current_image) draw = ImageDraw.Draw(pil_image) # Iterate over the bounding boxes for the current image for j, (class_name, class_data) in enumerate(tracking.items()): for class_id, bbox_list in class_data.items(): # Check if the current index is within the bounds of the bbox_list if i < len(bbox_list): bbox = bbox_list[i] # Ensure bbox is a list or tuple before unpacking if isinstance(bbox, (list, tuple)): x1, y1, x2, y2, _, _ = bbox # Convert coordinates to integers x1, y1, x2, y2 = int(x1), int(y1), int(x2), int(y2) # Generate a color from the rainbow colormap color = tuple(int(255 * x) for x in colormap(j / len(tracking)))[:3] # Draw the bounding box on the image with the generated color draw.rectangle([x1, y1, x2, y2], outline=color, width=box_line_width) if draw_text: # Draw the class name and ID as text above the box with the generated color text = f"{class_id}.{class_name}" # Calculate the width and height of the text _, _, text_width, text_height = draw.textbbox((0, 0), text=text, font=font) # Position the text above the top-left corner of the box text_position = (x1, y1 - text_height) draw.text(text_position, text, fill=color, font=font) else: print(f"Unexpected data type for bbox: {type(bbox)}") # Convert the drawn image back to a torch tensor and adjust back to (H, W, C) modified_image_tensor = transforms.ToTensor()(pil_image).permute(1, 2, 0) modified_images.append(modified_image_tensor) # Stack the modified images back into a batch image_tensor_batch = torch.stack(modified_images).cpu().float() return image_tensor_batch, class PointsEditor: @classmethod def INPUT_TYPES(cls): return { "required": { "points_store": ("STRING", {"multiline": False}), "coordinates": ("STRING", {"multiline": False}), "neg_coordinates": ("STRING", {"multiline": False}), "bbox_store": ("STRING", {"multiline": False}), "bboxes": ("STRING", {"multiline": False}), "bbox_format": ( [ 'xyxy', 'xywh', ], ), "width": ("INT", {"default": 512, "min": 8, "max": 4096, "step": 8}), "height": ("INT", {"default": 512, "min": 8, "max": 4096, "step": 8}), "normalize": ("BOOLEAN", {"default": False}), }, "optional": { "bg_image": ("IMAGE", ), }, } RETURN_TYPES = ("STRING", "STRING", "BBOX", "MASK", "IMAGE") RETURN_NAMES = ("positive_coords", "negative_coords", "bbox", "bbox_mask", "cropped_image") FUNCTION = "pointdata" CATEGORY = "KJNodes/experimental" DESCRIPTION = """ # WORK IN PROGRESS Do not count on this as part of your workflow yet, probably contains lots of bugs and stability is not guaranteed!! ## Graphical editor to create coordinates **Shift + click** to add a positive (green) point. **Shift + right click** to add a negative (red) point. **Ctrl + click** to draw a box. **Right click on a point** to delete it. Note that you can't delete from start/end of the points array. To add an image select the node and copy/paste or drag in the image. Or from the bg_image input on queue (first frame of the batch). **THE IMAGE IS SAVED TO THE NODE AND WORKFLOW METADATA** you can clear the image from the context menu by right clicking on the canvas """ def pointdata(self, points_store, bbox_store, width, height, coordinates, neg_coordinates, normalize, bboxes, bbox_format="xyxy", bg_image=None): import io import base64 coordinates = json.loads(coordinates) pos_coordinates = [] for coord in coordinates: coord['x'] = int(round(coord['x'])) coord['y'] = int(round(coord['y'])) if normalize: norm_x = coord['x'] / width norm_y = coord['y'] / height pos_coordinates.append({'x': norm_x, 'y': norm_y}) else: pos_coordinates.append({'x': coord['x'], 'y': coord['y']}) if neg_coordinates: coordinates = json.loads(neg_coordinates) neg_coordinates = [] for coord in coordinates: coord['x'] = int(round(coord['x'])) coord['y'] = int(round(coord['y'])) if normalize: norm_x = coord['x'] / width norm_y = coord['y'] / height neg_coordinates.append({'x': norm_x, 'y': norm_y}) else: neg_coordinates.append({'x': coord['x'], 'y': coord['y']}) # Create a blank mask mask = np.zeros((height, width), dtype=np.uint8) bboxes = json.loads(bboxes) print(bboxes) valid_bboxes = [] for bbox in bboxes: if (bbox.get("startX") is None or bbox.get("startY") is None or bbox.get("endX") is None or bbox.get("endY") is None): continue # Skip this bounding box if any value is None else: # Ensure that endX and endY are greater than startX and startY x_min = min(int(bbox["startX"]), int(bbox["endX"])) y_min = min(int(bbox["startY"]), int(bbox["endY"])) x_max = max(int(bbox["startX"]), int(bbox["endX"])) y_max = max(int(bbox["startY"]), int(bbox["endY"])) valid_bboxes.append((x_min, y_min, x_max, y_max)) bboxes_xyxy = [] for bbox in valid_bboxes: x_min, y_min, x_max, y_max = bbox bboxes_xyxy.append((x_min, y_min, x_max, y_max)) mask[y_min:y_max, x_min:x_max] = 1 # Fill the bounding box area with 1s if bbox_format == "xywh": bboxes_xywh = [] for bbox in valid_bboxes: x_min, y_min, x_max, y_max = bbox width = x_max - x_min height = y_max - y_min bboxes_xywh.append((x_min, y_min, width, height)) bboxes = bboxes_xywh else: bboxes = bboxes_xyxy mask_tensor = torch.from_numpy(mask) mask_tensor = mask_tensor.unsqueeze(0).float().cpu() if bg_image is not None and len(valid_bboxes) > 0: x_min, y_min, x_max, y_max = bboxes[0] cropped_image = bg_image[:, y_min:y_max, x_min:x_max, :] elif bg_image is not None: cropped_image = bg_image if bg_image is None: return (json.dumps(pos_coordinates), json.dumps(neg_coordinates), bboxes, mask_tensor) else: transform = transforms.ToPILImage() image = transform(bg_image[0].permute(2, 0, 1)) buffered = io.BytesIO() image.save(buffered, format="JPEG", quality=75) # Step 3: Encode the image bytes to a Base64 string img_bytes = buffered.getvalue() img_base64 = base64.b64encode(img_bytes).decode('utf-8') return { "ui": {"bg_image": [img_base64]}, "result": (json.dumps(pos_coordinates), json.dumps(neg_coordinates), bboxes, mask_tensor, cropped_image) }