fix: remove postgre conf file

docker-entrypoint-initdb.d/pg_hba.conf

@@ -1,94 +0,0 @@
-# PostgreSQL Client Authentication Configuration File
-# ===================================================
-#
-# Refer to the "Client Authentication" section in the PostgreSQL
-# documentation for a complete description of this file.  A short
-# synopsis follows.
-#
-# This file controls: which hosts are allowed to connect, how clients
-# are authenticated, which PostgreSQL user names they can use, which
-# databases they can access.  Records take one of these forms:
-#
-# local         DATABASE  USER  METHOD  [OPTIONS]
-# host          DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
-# hostssl       DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
-# hostnossl     DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
-# hostgssenc    DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
-# hostnogssenc  DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
-#
-# (The uppercase items must be replaced by actual values.)
-#
-# The first field is the connection type:
-# - "local" is a Unix-domain socket
-# - "host" is a TCP/IP socket (encrypted or not)
-# - "hostssl" is a TCP/IP socket that is SSL-encrypted
-# - "hostnossl" is a TCP/IP socket that is not SSL-encrypted
-# - "hostgssenc" is a TCP/IP socket that is GSSAPI-encrypted
-# - "hostnogssenc" is a TCP/IP socket that is not GSSAPI-encrypted
-#
-# DATABASE can be "all", "sameuser", "samerole", "replication", a
-# database name, or a comma-separated list thereof. The "all"
-# keyword does not match "replication". Access to replication
-# must be enabled in a separate record (see example below).
-#
-# USER can be "all", a user name, a group name prefixed with "+", or a
-# comma-separated list thereof.  In both the DATABASE and USER fields
-# you can also write a file name prefixed with "@" to include names
-# from a separate file.
-#
-# ADDRESS specifies the set of hosts the record matches.  It can be a
-# host name, or it is made up of an IP address and a CIDR mask that is
-# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that
-# specifies the number of significant bits in the mask.  A host name
-# that starts with a dot (.) matches a suffix of the actual host name.
-# Alternatively, you can write an IP address and netmask in separate
-# columns to specify the set of hosts.  Instead of a CIDR-address, you
-# can write "samehost" to match any of the server's own IP addresses,
-# or "samenet" to match any address in any subnet that the server is
-# directly connected to.
-#
-# METHOD can be "trust", "reject", "md5", "password", "scram-sha-256",
-# "gss", "sspi", "ident", "peer", "pam", "ldap", "radius" or "cert".
-# Note that "password" sends passwords in clear text; "md5" or
-# "scram-sha-256" are preferred since they send encrypted passwords.
-#
-# OPTIONS are a set of options for the authentication in the format
-# NAME=VALUE.  The available options depend on the different
-# authentication methods -- refer to the "Client Authentication"
-# section in the documentation for a list of which options are
-# available for which authentication methods.
-#
-# Database and user names containing spaces, commas, quotes and other
-# special characters must be quoted.  Quoting one of the keywords
-# "all", "sameuser", "samerole" or "replication" makes the name lose
-# its special character, and just match a database or username with
-# that name.
-#
-# This file is read on server startup and when the server receives a
-# SIGHUP signal.  If you edit the file on a running system, you have to
-# SIGHUP the server for the changes to take effect, run "pg_ctl reload",
-# or execute "SELECT pg_reload_conf()".
-#
-# Put your actual configuration here
-# ----------------------------------
-#
-# If you want to allow non-local connections, you need to add more
-# "host" records.  In that case you will also need to make PostgreSQL
-# listen on a non-local interface via the listen_addresses
-# configuration parameter, or via the -i or -h command line switches.
-
-@authcomment@
-
-# TYPE  DATABASE        USER            ADDRESS                 METHOD
-
-@remove-line-for-nolocal@# "local" is for Unix domain socket connections only
-@remove-line-for-nolocal@local   all             all                                     @authmethodlocal@
-# IPv4 local connections:
-host    all             all             127.0.0.1/32            @authmethodhost@
-# IPv6 local connections:
-host    all             all             ::1/128                 @authmethodhost@
-# Allow replication connections from localhost, by a user with the
-# replication privilege.
-@remove-line-for-nolocal@local   replication     all                                     @authmethodlocal@
-host    replication     all             127.0.0.1/32            @authmethodhost@
-host    replication     all             ::1/128                 @authmethodhost@

docker-entrypoint-initdb.d/postgresql.conf

@@ -1,796 +0,0 @@
-# -----------------------------
-# PostgreSQL configuration file
-# -----------------------------
-#
-# This file consists of lines of the form:
-#
-#   name = value
-#
-# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
-# "#" anywhere on a line.  The complete list of parameter names and allowed
-# values can be found in the PostgreSQL documentation.
-#
-# The commented-out settings shown in this file represent the default values.
-# Re-commenting a setting is NOT sufficient to revert it to the default value;
-# you need to reload the server.
-#
-# This file is read on server startup and when the server receives a SIGHUP
-# signal.  If you edit the file on a running system, you have to SIGHUP the
-# server for the changes to take effect, run "pg_ctl reload", or execute
-# "SELECT pg_reload_conf()".  Some parameters, which are marked below,
-# require a server shutdown and restart to take effect.
-#
-# Any parameter can also be given as a command-line option to the server, e.g.,
-# "postgres -c log_connections=on".  Some parameters can be changed at run time
-# with the "SET" SQL command.
-#
-# Memory units:  B  = bytes            Time units:  us  = microseconds
-#                kB = kilobytes                     ms  = milliseconds
-#                MB = megabytes                     s   = seconds
-#                GB = gigabytes                     min = minutes
-#                TB = terabytes                     h   = hours
-#                                                   d   = days
-
-
-#------------------------------------------------------------------------------
-# FILE LOCATIONS
-#------------------------------------------------------------------------------
-
-# The default values of these variables are driven from the -D command-line
-# option or PGDATA environment variable, represented here as ConfigDir.
-
-#data_directory = 'ConfigDir'		# use data in another directory
-					# (change requires restart)
-#hba_file = 'ConfigDir/pg_hba.conf'	# host-based authentication file
-					# (change requires restart)
-#ident_file = 'ConfigDir/pg_ident.conf'	# ident configuration file
-					# (change requires restart)
-
-# If external_pid_file is not explicitly set, no extra PID file is written.
-#external_pid_file = ''			# write an extra PID file
-					# (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# CONNECTIONS AND AUTHENTICATION
-#------------------------------------------------------------------------------
-
-# - Connection Settings -
-
-#listen_addresses = 'localhost'		# what IP address(es) to listen on;
-					# comma-separated list of addresses;
-					# defaults to 'localhost'; use '*' for all
-					# (change requires restart)
-#port = 5432				# (change requires restart)
-#max_connections = 100			# (change requires restart)
-#superuser_reserved_connections = 3	# (change requires restart)
-#unix_socket_directories = '/tmp'	# comma-separated list of directories
-					# (change requires restart)
-#unix_socket_group = ''			# (change requires restart)
-#unix_socket_permissions = 0777		# begin with 0 to use octal notation
-					# (change requires restart)
-#bonjour = off				# advertise server via Bonjour
-					# (change requires restart)
-#bonjour_name = ''			# defaults to the computer name
-					# (change requires restart)
-
-# - TCP settings -
-# see "man tcp" for details
-
-#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
-					# 0 selects the system default
-#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
-					# 0 selects the system default
-#tcp_keepalives_count = 0		# TCP_KEEPCNT;
-					# 0 selects the system default
-#tcp_user_timeout = 0			# TCP_USER_TIMEOUT, in milliseconds;
-					# 0 selects the system default
-
-#client_connection_check_interval = 0	# time between checks for client
-					# disconnection while running queries;
-					# 0 for never
-
-# - Authentication -
-
-#authentication_timeout = 1min		# 1s-600s
-#password_encryption = scram-sha-256	# scram-sha-256 or md5
-#db_user_namespace = off
-
-# GSSAPI using Kerberos
-#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab'
-#krb_caseins_users = off
-
-# - SSL -
-
-#ssl = off
-#ssl_ca_file = ''
-#ssl_cert_file = 'server.crt'
-#ssl_crl_file = ''
-#ssl_crl_dir = ''
-#ssl_key_file = 'server.key'
-#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
-#ssl_prefer_server_ciphers = on
-#ssl_ecdh_curve = 'prime256v1'
-#ssl_min_protocol_version = 'TLSv1.2'
-#ssl_max_protocol_version = ''
-#ssl_dh_params_file = ''
-#ssl_passphrase_command = ''
-#ssl_passphrase_command_supports_reload = off
-
-
-#------------------------------------------------------------------------------
-# RESOURCE USAGE (except WAL)
-#------------------------------------------------------------------------------
-
-# - Memory -
-
-#shared_buffers = 32MB			# min 128kB
-					# (change requires restart)
-#huge_pages = try			# on, off, or try
-					# (change requires restart)
-#huge_page_size = 0			# zero for system default
-					# (change requires restart)
-#temp_buffers = 8MB			# min 800kB
-#max_prepared_transactions = 0		# zero disables the feature
-					# (change requires restart)
-# Caution: it is not advisable to set max_prepared_transactions nonzero unless
-# you actively intend to use prepared transactions.
-#work_mem = 4MB				# min 64kB
-#hash_mem_multiplier = 1.0		# 1-1000.0 multiplier on hash table work_mem
-#maintenance_work_mem = 64MB		# min 1MB
-#autovacuum_work_mem = -1		# min 1MB, or -1 to use maintenance_work_mem
-#logical_decoding_work_mem = 64MB	# min 64kB
-#max_stack_depth = 2MB			# min 100kB
-#shared_memory_type = mmap		# the default is the first option
-					# supported by the operating system:
-					#   mmap
-					#   sysv
-					#   windows
-					# (change requires restart)
-#dynamic_shared_memory_type = posix	# the default is the first option
-					# supported by the operating system:
-					#   posix
-					#   sysv
-					#   windows
-					#   mmap
-					# (change requires restart)
-#min_dynamic_shared_memory = 0MB	# (change requires restart)
-
-# - Disk -
-
-#temp_file_limit = -1			# limits per-process temp file space
-					# in kilobytes, or -1 for no limit
-
-# - Kernel Resources -
-
-#max_files_per_process = 1000		# min 64
-					# (change requires restart)
-
-# - Cost-Based Vacuum Delay -
-
-#vacuum_cost_delay = 0			# 0-100 milliseconds (0 disables)
-#vacuum_cost_page_hit = 1		# 0-10000 credits
-#vacuum_cost_page_miss = 2		# 0-10000 credits
-#vacuum_cost_page_dirty = 20		# 0-10000 credits
-#vacuum_cost_limit = 200		# 1-10000 credits
-
-# - Background Writer -
-
-#bgwriter_delay = 200ms			# 10-10000ms between rounds
-#bgwriter_lru_maxpages = 100		# max buffers written/round, 0 disables
-#bgwriter_lru_multiplier = 2.0		# 0-10.0 multiplier on buffers scanned/round
-#bgwriter_flush_after = 0		# measured in pages, 0 disables
-
-# - Asynchronous Behavior -
-
-#backend_flush_after = 0		# measured in pages, 0 disables
-#effective_io_concurrency = 1		# 1-1000; 0 disables prefetching
-#maintenance_io_concurrency = 10	# 1-1000; 0 disables prefetching
-#max_worker_processes = 8		# (change requires restart)
-#max_parallel_workers_per_gather = 2	# taken from max_parallel_workers
-#max_parallel_maintenance_workers = 2	# taken from max_parallel_workers
-#max_parallel_workers = 8		# maximum number of max_worker_processes that
-					# can be used in parallel operations
-#parallel_leader_participation = on
-#old_snapshot_threshold = -1		# 1min-60d; -1 disables; 0 is immediate
-					# (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# WRITE-AHEAD LOG
-#------------------------------------------------------------------------------
-
-# - Settings -
-
-#wal_level = replica			# minimal, replica, or logical
-					# (change requires restart)
-#fsync = on				# flush data to disk for crash safety
-					# (turning this off can cause
-					# unrecoverable data corruption)
-#synchronous_commit = on		# synchronization level;
-					# off, local, remote_write, remote_apply, or on
-#wal_sync_method = fsync		# the default is the first option
-					# supported by the operating system:
-					#   open_datasync
-					#   fdatasync (default on Linux and FreeBSD)
-					#   fsync
-					#   fsync_writethrough
-					#   open_sync
-#full_page_writes = on			# recover from partial page writes
-#wal_log_hints = off			# also do full page writes of non-critical updates
-					# (change requires restart)
-#wal_compression = off			# enable compression of full-page writes
-#wal_init_zero = on			# zero-fill new WAL files
-#wal_recycle = on			# recycle WAL files
-#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
-					# (change requires restart)
-#wal_writer_delay = 200ms		# 1-10000 milliseconds
-#wal_writer_flush_after = 1MB		# measured in pages, 0 disables
-#wal_skip_threshold = 2MB
-
-#commit_delay = 0			# range 0-100000, in microseconds
-#commit_siblings = 5			# range 1-1000
-
-# - Checkpoints -
-
-#checkpoint_timeout = 5min		# range 30s-1d
-#checkpoint_completion_target = 0.9	# checkpoint target duration, 0.0 - 1.0
-#checkpoint_flush_after = 0		# measured in pages, 0 disables
-#checkpoint_warning = 30s		# 0 disables
-#max_wal_size = 1GB
-#min_wal_size = 80MB
-
-# - Archiving -
-
-#archive_mode = off		# enables archiving; off, on, or always
-				# (change requires restart)
-#archive_command = ''		# command to use to archive a logfile segment
-				# placeholders: %p = path of file to archive
-				#               %f = file name only
-				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
-#archive_timeout = 0		# force a logfile segment switch after this
-				# number of seconds; 0 disables
-
-# - Archive Recovery -
-
-# These are only used in recovery mode.
-
-#restore_command = ''		# command to use to restore an archived logfile segment
-				# placeholders: %p = path of file to restore
-				#               %f = file name only
-				# e.g. 'cp /mnt/server/archivedir/%f %p'
-#archive_cleanup_command = ''	# command to execute at every restartpoint
-#recovery_end_command = ''	# command to execute at completion of recovery
-
-# - Recovery Target -
-
-# Set these only when performing a targeted recovery.
-
-#recovery_target = ''		# 'immediate' to end recovery as soon as a
-                                # consistent state is reached
-				# (change requires restart)
-#recovery_target_name = ''	# the named restore point to which recovery will proceed
-				# (change requires restart)
-#recovery_target_time = ''	# the time stamp up to which recovery will proceed
-				# (change requires restart)
-#recovery_target_xid = ''	# the transaction ID up to which recovery will proceed
-				# (change requires restart)
-#recovery_target_lsn = ''	# the WAL LSN up to which recovery will proceed
-				# (change requires restart)
-#recovery_target_inclusive = on # Specifies whether to stop:
-				# just after the specified recovery target (on)
-				# just before the recovery target (off)
-				# (change requires restart)
-#recovery_target_timeline = 'latest'	# 'current', 'latest', or timeline ID
-				# (change requires restart)
-#recovery_target_action = 'pause'	# 'pause', 'promote', 'shutdown'
-				# (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# REPLICATION
-#------------------------------------------------------------------------------
-
-# - Sending Servers -
-
-# Set these on the primary and on any standby that will send replication data.
-
-#max_wal_senders = 10		# max number of walsender processes
-				# (change requires restart)
-#max_replication_slots = 10	# max number of replication slots
-				# (change requires restart)
-#wal_keep_size = 0		# in megabytes; 0 disables
-#max_slot_wal_keep_size = -1	# in megabytes; -1 disables
-#wal_sender_timeout = 60s	# in milliseconds; 0 disables
-#track_commit_timestamp = off	# collect timestamp of transaction commit
-				# (change requires restart)
-
-# - Primary Server -
-
-# These settings are ignored on a standby server.
-
-#synchronous_standby_names = ''	# standby servers that provide sync rep
-				# method to choose sync standbys, number of sync standbys,
-				# and comma-separated list of application_name
-				# from standby(s); '*' = all
-#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
-
-# - Standby Servers -
-
-# These settings are ignored on a primary server.
-
-#primary_conninfo = ''			# connection string to sending server
-#primary_slot_name = ''			# replication slot on sending server
-#promote_trigger_file = ''		# file name whose presence ends recovery
-#hot_standby = on			# "off" disallows queries during recovery
-					# (change requires restart)
-#max_standby_archive_delay = 30s	# max delay before canceling queries
-					# when reading WAL from archive;
-					# -1 allows indefinite delay
-#max_standby_streaming_delay = 30s	# max delay before canceling queries
-					# when reading streaming WAL;
-					# -1 allows indefinite delay
-#wal_receiver_create_temp_slot = off	# create temp slot if primary_slot_name
-					# is not set
-#wal_receiver_status_interval = 10s	# send replies at least this often
-					# 0 disables
-#hot_standby_feedback = off		# send info from standby to prevent
-					# query conflicts
-#wal_receiver_timeout = 60s		# time that receiver waits for
-					# communication from primary
-					# in milliseconds; 0 disables
-#wal_retrieve_retry_interval = 5s	# time to wait before retrying to
-					# retrieve WAL after a failed attempt
-#recovery_min_apply_delay = 0		# minimum delay for applying changes during recovery
-
-# - Subscribers -
-
-# These settings are ignored on a publisher.
-
-#max_logical_replication_workers = 4	# taken from max_worker_processes
-					# (change requires restart)
-#max_sync_workers_per_subscription = 2	# taken from max_logical_replication_workers
-
-
-#------------------------------------------------------------------------------
-# QUERY TUNING
-#------------------------------------------------------------------------------
-
-# - Planner Method Configuration -
-
-#enable_async_append = on
-#enable_bitmapscan = on
-#enable_gathermerge = on
-#enable_hashagg = on
-#enable_hashjoin = on
-#enable_incremental_sort = on
-#enable_indexscan = on
-#enable_indexonlyscan = on
-#enable_material = on
-#enable_memoize = on
-#enable_mergejoin = on
-#enable_nestloop = on
-#enable_parallel_append = on
-#enable_parallel_hash = on
-#enable_partition_pruning = on
-#enable_partitionwise_join = off
-#enable_partitionwise_aggregate = off
-#enable_seqscan = on
-#enable_sort = on
-#enable_tidscan = on
-
-# - Planner Cost Constants -
-
-#seq_page_cost = 1.0			# measured on an arbitrary scale
-#random_page_cost = 4.0			# same scale as above
-#cpu_tuple_cost = 0.01			# same scale as above
-#cpu_index_tuple_cost = 0.005		# same scale as above
-#cpu_operator_cost = 0.0025		# same scale as above
-#parallel_setup_cost = 1000.0	# same scale as above
-#parallel_tuple_cost = 0.1		# same scale as above
-#min_parallel_table_scan_size = 8MB
-#min_parallel_index_scan_size = 512kB
-#effective_cache_size = 4GB
-
-#jit_above_cost = 100000		# perform JIT compilation if available
-					# and query more expensive than this;
-					# -1 disables
-#jit_inline_above_cost = 500000		# inline small functions if query is
-					# more expensive than this; -1 disables
-#jit_optimize_above_cost = 500000	# use expensive JIT optimizations if
-					# query is more expensive than this;
-					# -1 disables
-
-# - Genetic Query Optimizer -
-
-#geqo = on
-#geqo_threshold = 12
-#geqo_effort = 5			# range 1-10
-#geqo_pool_size = 0			# selects default based on effort
-#geqo_generations = 0			# selects default based on effort
-#geqo_selection_bias = 2.0		# range 1.5-2.0
-#geqo_seed = 0.0			# range 0.0-1.0
-
-# - Other Planner Options -
-
-#default_statistics_target = 100	# range 1-10000
-#constraint_exclusion = partition	# on, off, or partition
-#cursor_tuple_fraction = 0.1		# range 0.0-1.0
-#from_collapse_limit = 8
-#jit = on				# allow JIT compilation
-#join_collapse_limit = 8		# 1 disables collapsing of explicit
-					# JOIN clauses
-#plan_cache_mode = auto			# auto, force_generic_plan or
-					# force_custom_plan
-
-
-#------------------------------------------------------------------------------
-# REPORTING AND LOGGING
-#------------------------------------------------------------------------------
-
-# - Where to Log -
-
-#log_destination = 'stderr'		# Valid values are combinations of
-					# stderr, csvlog, syslog, and eventlog,
-					# depending on platform.  csvlog
-					# requires logging_collector to be on.
-
-# This is used when logging to stderr:
-#logging_collector = off		# Enable capturing of stderr and csvlog
-					# into log files. Required to be on for
-					# csvlogs.
-					# (change requires restart)
-
-# These are only used if logging_collector is on:
-#log_directory = 'log'			# directory where log files are written,
-					# can be absolute or relative to PGDATA
-#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
-					# can include strftime() escapes
-#log_file_mode = 0600			# creation mode for log files,
-					# begin with 0 to use octal notation
-#log_rotation_age = 1d			# Automatic rotation of logfiles will
-					# happen after that time.  0 disables.
-#log_rotation_size = 10MB		# Automatic rotation of logfiles will
-					# happen after that much log output.
-					# 0 disables.
-#log_truncate_on_rotation = off		# If on, an existing log file with the
-					# same name as the new log file will be
-					# truncated rather than appended to.
-					# But such truncation only occurs on
-					# time-driven rotation, not on restarts
-					# or size-driven rotation.  Default is
-					# off, meaning append to existing files
-					# in all cases.
-
-# These are relevant when logging to syslog:
-#syslog_facility = 'LOCAL0'
-#syslog_ident = 'postgres'
-#syslog_sequence_numbers = on
-#syslog_split_messages = on
-
-# This is only relevant when logging to eventlog (Windows):
-# (change requires restart)
-#event_source = 'PostgreSQL'
-
-# - When to Log -
-
-#log_min_messages = warning		# values in order of decreasing detail:
-					#   debug5
-					#   debug4
-					#   debug3
-					#   debug2
-					#   debug1
-					#   info
-					#   notice
-					#   warning
-					#   error
-					#   log
-					#   fatal
-					#   panic
-
-#log_min_error_statement = error	# values in order of decreasing detail:
-					#   debug5
-					#   debug4
-					#   debug3
-					#   debug2
-					#   debug1
-					#   info
-					#   notice
-					#   warning
-					#   error
-					#   log
-					#   fatal
-					#   panic (effectively off)
-
-#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
-					# and their durations, > 0 logs only
-					# statements running at least this number
-					# of milliseconds
-
-#log_min_duration_sample = -1		# -1 is disabled, 0 logs a sample of statements
-					# and their durations, > 0 logs only a sample of
-					# statements running at least this number
-					# of milliseconds;
-					# sample fraction is determined by log_statement_sample_rate
-
-#log_statement_sample_rate = 1.0	# fraction of logged statements exceeding
-					# log_min_duration_sample to be logged;
-					# 1.0 logs all such statements, 0.0 never logs
-
-
-#log_transaction_sample_rate = 0.0	# fraction of transactions whose statements
-					# are logged regardless of their duration; 1.0 logs all
-					# statements from all transactions, 0.0 never logs
-
-# - What to Log -
-
-#debug_print_parse = off
-#debug_print_rewritten = off
-#debug_print_plan = off
-#debug_pretty_print = on
-#log_autovacuum_min_duration = -1	# log autovacuum activity;
-					# -1 disables, 0 logs all actions and
-					# their durations, > 0 logs only
-					# actions running at least this number
-					# of milliseconds.
-#log_checkpoints = off
-#log_connections = off
-#log_disconnections = off
-#log_duration = off
-#log_error_verbosity = default		# terse, default, or verbose messages
-#log_hostname = off
-#log_line_prefix = '%m [%p] '		# special values:
-					#   %a = application name
-					#   %u = user name
-					#   %d = database name
-					#   %r = remote host and port
-					#   %h = remote host
-					#   %b = backend type
-					#   %p = process ID
-					#   %P = process ID of parallel group leader
-					#   %t = timestamp without milliseconds
-					#   %m = timestamp with milliseconds
-					#   %n = timestamp with milliseconds (as a Unix epoch)
-					#   %Q = query ID (0 if none or not computed)
-					#   %i = command tag
-					#   %e = SQL state
-					#   %c = session ID
-					#   %l = session line number
-					#   %s = session start timestamp
-					#   %v = virtual transaction ID
-					#   %x = transaction ID (0 if none)
-					#   %q = stop here in non-session
-					#        processes
-					#   %% = '%'
-					# e.g. '<%u%%%d> '
-#log_lock_waits = off			# log lock waits >= deadlock_timeout
-#log_recovery_conflict_waits = off	# log standby recovery conflict waits
-					# >= deadlock_timeout
-#log_parameter_max_length = -1		# when logging statements, limit logged
-					# bind-parameter values to N bytes;
-					# -1 means print in full, 0 disables
-#log_parameter_max_length_on_error = 0	# when logging an error, limit logged
-					# bind-parameter values to N bytes;
-					# -1 means print in full, 0 disables
-#log_statement = 'none'			# none, ddl, mod, all
-#log_replication_commands = off
-#log_temp_files = -1			# log temporary files equal or larger
-					# than the specified size in kilobytes;
-					# -1 disables, 0 logs all temp files
-#log_timezone = 'GMT'
-
-
-#------------------------------------------------------------------------------
-# PROCESS TITLE
-#------------------------------------------------------------------------------
-
-#cluster_name = ''			# added to process titles if nonempty
-					# (change requires restart)
-#update_process_title = on
-
-
-#------------------------------------------------------------------------------
-# STATISTICS
-#------------------------------------------------------------------------------
-
-# - Query and Index Statistics Collector -
-
-#track_activities = on
-#track_activity_query_size = 1024	# (change requires restart)
-#track_counts = on
-#track_io_timing = off
-#track_wal_io_timing = off
-#track_functions = none			# none, pl, all
-#stats_temp_directory = 'pg_stat_tmp'
-
-
-# - Monitoring -
-
-#compute_query_id = auto
-#log_statement_stats = off
-#log_parser_stats = off
-#log_planner_stats = off
-#log_executor_stats = off
-
-
-#------------------------------------------------------------------------------
-# AUTOVACUUM
-#------------------------------------------------------------------------------
-
-#autovacuum = on			# Enable autovacuum subprocess?  'on'
-					# requires track_counts to also be on.
-#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
-					# (change requires restart)
-#autovacuum_naptime = 1min		# time between autovacuum runs
-#autovacuum_vacuum_threshold = 50	# min number of row updates before
-					# vacuum
-#autovacuum_vacuum_insert_threshold = 1000	# min number of row inserts
-					# before vacuum; -1 disables insert
-					# vacuums
-#autovacuum_analyze_threshold = 50	# min number of row updates before
-					# analyze
-#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
-#autovacuum_vacuum_insert_scale_factor = 0.2	# fraction of inserts over table
-					# size before insert vacuum
-#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
-#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
-					# (change requires restart)
-#autovacuum_multixact_freeze_max_age = 400000000	# maximum multixact age
-					# before forced vacuum
-					# (change requires restart)
-#autovacuum_vacuum_cost_delay = 2ms	# default vacuum cost delay for
-					# autovacuum, in milliseconds;
-					# -1 means use vacuum_cost_delay
-#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
-					# autovacuum, -1 means use
-					# vacuum_cost_limit
-
-
-#------------------------------------------------------------------------------
-# CLIENT CONNECTION DEFAULTS
-#------------------------------------------------------------------------------
-
-# - Statement Behavior -
-
-#client_min_messages = notice		# values in order of decreasing detail:
-					#   debug5
-					#   debug4
-					#   debug3
-					#   debug2
-					#   debug1
-					#   log
-					#   notice
-					#   warning
-					#   error
-#search_path = '"$user", public'	# schema names
-#row_security = on
-#default_table_access_method = 'heap'
-#default_tablespace = ''		# a tablespace name, '' uses the default
-#default_toast_compression = 'pglz'	# 'pglz' or 'lz4'
-#temp_tablespaces = ''			# a list of tablespace names, '' uses
-					# only default tablespace
-#check_function_bodies = on
-#default_transaction_isolation = 'read committed'
-#default_transaction_read_only = off
-#default_transaction_deferrable = off
-#session_replication_role = 'origin'
-#statement_timeout = 0			# in milliseconds, 0 is disabled
-#lock_timeout = 0			# in milliseconds, 0 is disabled
-#idle_in_transaction_session_timeout = 0	# in milliseconds, 0 is disabled
-#idle_session_timeout = 0		# in milliseconds, 0 is disabled
-#vacuum_freeze_table_age = 150000000
-#vacuum_freeze_min_age = 50000000
-#vacuum_failsafe_age = 1600000000
-#vacuum_multixact_freeze_table_age = 150000000
-#vacuum_multixact_freeze_min_age = 5000000
-#vacuum_multixact_failsafe_age = 1600000000
-#bytea_output = 'hex'			# hex, escape
-#xmlbinary = 'base64'
-#xmloption = 'content'
-#gin_pending_list_limit = 4MB
-
-# - Locale and Formatting -
-
-#datestyle = 'iso, mdy'
-#intervalstyle = 'postgres'
-#timezone = 'GMT'
-#timezone_abbreviations = 'Default'     # Select the set of available time zone
-					# abbreviations.  Currently, there are
-					#   Default
-					#   Australia (historical usage)
-					#   India
-					# You can create your own file in
-					# share/timezonesets/.
-#extra_float_digits = 1			# min -15, max 3; any value >0 actually
-					# selects precise output mode
-#client_encoding = sql_ascii		# actually, defaults to database
-					# encoding
-
-# These settings are initialized by initdb, but they can be changed.
-#lc_messages = 'C'			# locale for system error message
-					# strings
-#lc_monetary = 'C'			# locale for monetary formatting
-#lc_numeric = 'C'			# locale for number formatting
-#lc_time = 'C'				# locale for time formatting
-
-# default configuration for text search
-#default_text_search_config = 'pg_catalog.simple'
-
-# - Shared Library Preloading -
-
-#local_preload_libraries = ''
-#session_preload_libraries = ''
-#shared_preload_libraries = ''	# (change requires restart)
-#jit_provider = 'llvmjit'		# JIT library to use
-
-# - Other Defaults -
-
-#dynamic_library_path = '$libdir'
-#gin_fuzzy_search_limit = 0
-
-
-#------------------------------------------------------------------------------
-# LOCK MANAGEMENT
-#------------------------------------------------------------------------------
-
-#deadlock_timeout = 1s
-#max_locks_per_transaction = 64		# min 10
-					# (change requires restart)
-#max_pred_locks_per_transaction = 64	# min 10
-					# (change requires restart)
-#max_pred_locks_per_relation = -2	# negative values mean
-					# (max_pred_locks_per_transaction
-					#  / -max_pred_locks_per_relation) - 1
-#max_pred_locks_per_page = 2            # min 0
-
-
-#------------------------------------------------------------------------------
-# VERSION AND PLATFORM COMPATIBILITY
-#------------------------------------------------------------------------------
-
-# - Previous PostgreSQL Versions -
-
-#array_nulls = on
-#backslash_quote = safe_encoding	# on, off, or safe_encoding
-#escape_string_warning = on
-#lo_compat_privileges = off
-#quote_all_identifiers = off
-#standard_conforming_strings = on
-#synchronize_seqscans = on
-
-# - Other Platforms and Clients -
-
-#transform_null_equals = off
-
-
-#------------------------------------------------------------------------------
-# ERROR HANDLING
-#------------------------------------------------------------------------------
-
-#exit_on_error = off			# terminate session on any error?
-#restart_after_crash = on		# reinitialize after backend crash?
-#data_sync_retry = off			# retry or panic on failure to fsync
-					# data?
-					# (change requires restart)
-#recovery_init_sync_method = fsync	# fsync, syncfs (Linux 5.8+)
-
-
-#------------------------------------------------------------------------------
-# CONFIG FILE INCLUDES
-#------------------------------------------------------------------------------
-
-# These options allow settings to be loaded from files other than the
-# default postgresql.conf.  Note that these are directives, not variable
-# assignments, so they can usefully be given more than once.
-
-#include_dir = '...'			# include files ending in '.conf' from
-					# a directory, e.g., 'conf.d'
-#include_if_exists = '...'		# include file only if it exists
-#include = '...'			# include file
-
-
-#------------------------------------------------------------------------------
-# CUSTOMIZED OPTIONS
-#------------------------------------------------------------------------------
-
-# Add settings for extensions here