transformers/docs/source/en/tasks/sequence_classification.mdx

<!--Copyright 2022 The HuggingFace Team. All rights reserved.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
specific language governing permissions and limitations under the License.
-->

# Text classification

[[open-in-colab]]

<Youtube id="leNG9fN9FQU"/>

Text classification is a common NLP task that assigns a label or class to text. Some of the largest companies run text classification in production for a wide range of practical applications. One of the most popular forms of text classification is sentiment analysis, which assigns a label like 🙂 positive, 🙁 negative, or 😐 neutral to a sequence of text.

This guide will show you how to:

1. Finetune [DistilBERT](https://huggingface.co/distilbert-base-uncased) on the [IMDb](https://huggingface.co/datasets/imdb) dataset to determine whether a movie review is positive or negative.
2. Use your finetuned model for inference.

<Tip>
The task illustrated in this tutorial is supported by the following model architectures:

<!--This tip is automatically generated by `make fix-copies`, do not fill manually!-->

[ALBERT](../model_doc/albert), [BART](../model_doc/bart), [BERT](../model_doc/bert), [BigBird](../model_doc/big_bird), [BigBird-Pegasus](../model_doc/bigbird_pegasus), [BLOOM](../model_doc/bloom), [CamemBERT](../model_doc/camembert), [CANINE](../model_doc/canine), [ConvBERT](../model_doc/convbert), [CTRL](../model_doc/ctrl), [Data2VecText](../model_doc/data2vec-text), [DeBERTa](../model_doc/deberta), [DeBERTa-v2](../model_doc/deberta-v2), [DistilBERT](../model_doc/distilbert), [ELECTRA](../model_doc/electra), [ERNIE](../model_doc/ernie), [ErnieM](../model_doc/ernie_m), [ESM](../model_doc/esm), [FlauBERT](../model_doc/flaubert), [FNet](../model_doc/fnet), [Funnel Transformer](../model_doc/funnel), [GPT-Sw3](../model_doc/gpt-sw3), [OpenAI GPT-2](../model_doc/gpt2), [GPTBigCode](../model_doc/gpt_bigcode), [GPT Neo](../model_doc/gpt_neo), [GPT NeoX](../model_doc/gpt_neox), [GPT-J](../model_doc/gptj), [I-BERT](../model_doc/ibert), [LayoutLM](../model_doc/layoutlm), [LayoutLMv2](../model_doc/layoutlmv2), [LayoutLMv3](../model_doc/layoutlmv3), [LED](../model_doc/led), [LiLT](../model_doc/lilt), [LLaMA](../model_doc/llama), [Longformer](../model_doc/longformer), [LUKE](../model_doc/luke), [MarkupLM](../model_doc/markuplm), [mBART](../model_doc/mbart), [MEGA](../model_doc/mega), [Megatron-BERT](../model_doc/megatron-bert), [MobileBERT](../model_doc/mobilebert), [MPNet](../model_doc/mpnet), [MVP](../model_doc/mvp), [Nezha](../model_doc/nezha), [Nyströmformer](../model_doc/nystromformer), [OpenAI GPT](../model_doc/openai-gpt), [OPT](../model_doc/opt), [Perceiver](../model_doc/perceiver), [PLBart](../model_doc/plbart), [QDQBert](../model_doc/qdqbert), [Reformer](../model_doc/reformer), [RemBERT](../model_doc/rembert), [RoBERTa](../model_doc/roberta), [RoBERTa-PreLayerNorm](../model_doc/roberta-prelayernorm), [RoCBert](../model_doc/roc_bert), [RoFormer](../model_doc/roformer), [SqueezeBERT](../model_doc/squeezebert), [TAPAS](../model_doc/tapas), [Transformer-XL](../model_doc/transfo-xl), [XLM](../model_doc/xlm), [XLM-RoBERTa](../model_doc/xlm-roberta), [XLM-RoBERTa-XL](../model_doc/xlm-roberta-xl), [XLNet](../model_doc/xlnet), [X-MOD](../model_doc/xmod), [YOSO](../model_doc/yoso)


<!--End of the generated tip-->

</Tip>

Before you begin, make sure you have all the necessary libraries installed:

```bash
pip install transformers datasets evaluate
```

We encourage you to login to your Hugging Face account so you can upload and share your model with the community. When prompted, enter your token to login:

```py
>>> from huggingface_hub import notebook_login

>>> notebook_login()
```

## Load IMDb dataset

Start by loading the IMDb dataset from the 🤗 Datasets library:

```py
>>> from datasets import load_dataset

>>> imdb = load_dataset("imdb")
```

Then take a look at an example:

```py
>>> imdb["test"][0]
{
    "label": 0,
    "text": "I love sci-fi and am willing to put up with a lot. Sci-fi movies/TV are usually underfunded, under-appreciated and misunderstood. I tried to like this, I really did, but it is to good TV sci-fi as Babylon 5 is to Star Trek (the original). Silly prosthetics, cheap cardboard sets, stilted dialogues, CG that doesn't match the background, and painfully one-dimensional characters cannot be overcome with a 'sci-fi' setting. (I'm sure there are those of you out there who think Babylon 5 is good sci-fi TV. It's not. It's clichéd and uninspiring.) While US viewers might like emotion and character development, sci-fi is a genre that does not take itself seriously (cf. Star Trek). It may treat important issues, yet not as a serious philosophy. It's really difficult to care about the characters here as they are not simply foolish, just missing a spark of life. Their actions and reactions are wooden and predictable, often painful to watch. The makers of Earth KNOW it's rubbish as they have to always say \"Gene Roddenberry's Earth...\" otherwise people would not continue watching. Roddenberry's ashes must be turning in their orbit as this dull, cheap, poorly edited (watching it without advert breaks really brings this home) trudging Trabant of a show lumbers into space. Spoiler. So, kill off a main character. And then bring him back as another actor. Jeeez! Dallas all over again.",
}
```

There are two fields in this dataset:

- `text`: the movie review text.
- `label`: a value that is either `0` for a negative review or `1` for a positive review.

## Preprocess

The next step is to load a DistilBERT tokenizer to preprocess the `text` field:

```py
>>> from transformers import AutoTokenizer

>>> tokenizer = AutoTokenizer.from_pretrained("distilbert-base-uncased")
```

Create a preprocessing function to tokenize `text` and truncate sequences to be no longer than DistilBERT's maximum input length:

```py
>>> def preprocess_function(examples):
...     return tokenizer(examples["text"], truncation=True)
```

To apply the preprocessing function over the entire dataset, use 🤗 Datasets [`~datasets.Dataset.map`] function. You can speed up `map` by setting `batched=True` to process multiple elements of the dataset at once:

```py
tokenized_imdb = imdb.map(preprocess_function, batched=True)
```

Now create a batch of examples using [`DataCollatorWithPadding`]. It's more efficient to *dynamically pad* the sentences to the longest length in a batch during collation, instead of padding the whole dataset to the maximum length.

<frameworkcontent>
<pt>
```py
>>> from transformers import DataCollatorWithPadding

>>> data_collator = DataCollatorWithPadding(tokenizer=tokenizer)
```
</pt>
<tf>
```py
>>> from transformers import DataCollatorWithPadding

>>> data_collator = DataCollatorWithPadding(tokenizer=tokenizer, return_tensors="tf")
```
</tf>
</frameworkcontent>

## Evaluate

Including a metric during training is often helpful for evaluating your model's performance. You can quickly load a evaluation method with the 🤗 [Evaluate](https://huggingface.co/docs/evaluate/index) library. For this task, load the [accuracy](https://huggingface.co/spaces/evaluate-metric/accuracy) metric (see the 🤗 Evaluate [quick tour](https://huggingface.co/docs/evaluate/a_quick_tour) to learn more about how to load and compute a metric):

```py
>>> import evaluate

>>> accuracy = evaluate.load("accuracy")
```

Then create a function that passes your predictions and labels to [`~evaluate.EvaluationModule.compute`] to calculate the accuracy:

```py
>>> import numpy as np


>>> def compute_metrics(eval_pred):
...     predictions, labels = eval_pred
...     predictions = np.argmax(predictions, axis=1)
...     return accuracy.compute(predictions=predictions, references=labels)
```

Your `compute_metrics` function is ready to go now, and you'll return to it when you setup your training.

## Train

Before you start training your model, create a map of the expected ids to their labels with `id2label` and `label2id`:

```py
>>> id2label = {0: "NEGATIVE", 1: "POSITIVE"}
>>> label2id = {"NEGATIVE": 0, "POSITIVE": 1}
```

<frameworkcontent>
<pt>
<Tip>

If you aren't familiar with finetuning a model with the [`Trainer`], take a look at the basic tutorial [here](../training#train-with-pytorch-trainer)!

</Tip>

You're ready to start training your model now! Load DistilBERT with [`AutoModelForSequenceClassification`] along with the number of expected labels, and the label mappings:

```py
>>> from transformers import AutoModelForSequenceClassification, TrainingArguments, Trainer

>>> model = AutoModelForSequenceClassification.from_pretrained(
...     "distilbert-base-uncased", num_labels=2, id2label=id2label, label2id=label2id
... )
```

At this point, only three steps remain:

1. Define your training hyperparameters in [`TrainingArguments`]. The only required parameter is `output_dir` which specifies where to save your model. You'll push this model to the Hub by setting `push_to_hub=True` (you need to be signed in to Hugging Face to upload your model). At the end of each epoch, the [`Trainer`] will evaluate the accuracy and save the training checkpoint.
2. Pass the training arguments to [`Trainer`] along with the model, dataset, tokenizer, data collator, and `compute_metrics` function.
3. Call [`~Trainer.train`] to finetune your model.

```py
>>> training_args = TrainingArguments(
...     output_dir="my_awesome_model",
...     learning_rate=2e-5,
...     per_device_train_batch_size=16,
...     per_device_eval_batch_size=16,
...     num_train_epochs=2,
...     weight_decay=0.01,
...     evaluation_strategy="epoch",
...     save_strategy="epoch",
...     load_best_model_at_end=True,
...     push_to_hub=True,
... )

>>> trainer = Trainer(
...     model=model,
...     args=training_args,
...     train_dataset=tokenized_imdb["train"],
...     eval_dataset=tokenized_imdb["test"],
...     tokenizer=tokenizer,
...     data_collator=data_collator,
...     compute_metrics=compute_metrics,
... )

>>> trainer.train()
```

<Tip>

[`Trainer`] applies dynamic padding by default when you pass `tokenizer` to it. In this case, you don't need to specify a data collator explicitly.

</Tip>

Once training is completed, share your model to the Hub with the [`~transformers.Trainer.push_to_hub`] method so everyone can use your model:

```py
>>> trainer.push_to_hub()
```
</pt>
<tf>
<Tip>

If you aren't familiar with finetuning a model with Keras, take a look at the basic tutorial [here](../training#train-a-tensorflow-model-with-keras)!

</Tip>
To finetune a model in TensorFlow, start by setting up an optimizer function, learning rate schedule, and some training hyperparameters:

```py
>>> from transformers import create_optimizer
>>> import tensorflow as tf

>>> batch_size = 16
>>> num_epochs = 5
>>> batches_per_epoch = len(tokenized_imdb["train"]) // batch_size
>>> total_train_steps = int(batches_per_epoch * num_epochs)
>>> optimizer, schedule = create_optimizer(init_lr=2e-5, num_warmup_steps=0, num_train_steps=total_train_steps)
```

Then you can load DistilBERT with [`TFAutoModelForSequenceClassification`] along with the number of expected labels, and the label mappings:

```py
>>> from transformers import TFAutoModelForSequenceClassification

>>> model = TFAutoModelForSequenceClassification.from_pretrained(
...     "distilbert-base-uncased", num_labels=2, id2label=id2label, label2id=label2id
... )
```

Convert your datasets to the `tf.data.Dataset` format with [`~transformers.TFPreTrainedModel.prepare_tf_dataset`]:

```py
>>> tf_train_set = model.prepare_tf_dataset(
...     tokenized_imdb["train"],
...     shuffle=True,
...     batch_size=16,
...     collate_fn=data_collator,
... )

>>> tf_validation_set = model.prepare_tf_dataset(
...     tokenized_imdb["test"],
...     shuffle=False,
...     batch_size=16,
...     collate_fn=data_collator,
... )
```

Configure the model for training with [`compile`](https://keras.io/api/models/model_training_apis/#compile-method):

```py
>>> import tensorflow as tf

>>> model.compile(optimizer=optimizer)
```

The last two things to setup before you start training is to compute the accuracy from the predictions, and provide a way to push your model to the Hub. Both are done by using [Keras callbacks](../main_classes/keras_callbacks).

Pass your `compute_metrics` function to [`~transformers.KerasMetricCallback`]:

```py
>>> from transformers.keras_callbacks import KerasMetricCallback

>>> metric_callback = KerasMetricCallback(metric_fn=compute_metrics, eval_dataset=tf_validation_set)
```

Specify where to push your model and tokenizer in the [`~transformers.PushToHubCallback`]:

```py
>>> from transformers.keras_callbacks import PushToHubCallback

>>> push_to_hub_callback = PushToHubCallback(
...     output_dir="my_awesome_model",
...     tokenizer=tokenizer,
... )
```

Then bundle your callbacks together:

```py
>>> callbacks = [metric_callback, push_to_hub_callback]
```

Finally, you're ready to start training your model! Call [`fit`](https://keras.io/api/models/model_training_apis/#fit-method) with your training and validation datasets, the number of epochs, and your callbacks to finetune the model:

```py
>>> model.fit(x=tf_train_set, validation_data=tf_validation_set, epochs=3, callbacks=callbacks)
```

Once training is completed, your model is automatically uploaded to the Hub so everyone can use it!
</tf>
</frameworkcontent>

<Tip>

For a more in-depth example of how to finetune a model for text classification, take a look at the corresponding
[PyTorch notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification.ipynb)
or [TensorFlow notebook](https://colab.research.google.com/github/huggingface/notebooks/blob/main/examples/text_classification-tf.ipynb).

</Tip>

## Inference

Great, now that you've finetuned a model, you can use it for inference!

Grab some text you'd like to run inference on:

```py
>>> text = "This was a masterpiece. Not completely faithful to the books, but enthralling from beginning to end. Might be my favorite of the three."
```

The simplest way to try out your finetuned model for inference is to use it in a [`pipeline`]. Instantiate a `pipeline` for sentiment analysis with your model, and pass your text to it:

```py
>>> from transformers import pipeline

>>> classifier = pipeline("sentiment-analysis", model="stevhliu/my_awesome_model")
>>> classifier(text)
[{'label': 'POSITIVE', 'score': 0.9994940757751465}]
```

You can also manually replicate the results of the `pipeline` if you'd like:

<frameworkcontent>
<pt>
Tokenize the text and return PyTorch tensors:

```py
>>> from transformers import AutoTokenizer

>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_model")
>>> inputs = tokenizer(text, return_tensors="pt")
```

Pass your inputs to the model and return the `logits`:

```py
>>> from transformers import AutoModelForSequenceClassification

>>> model = AutoModelForSequenceClassification.from_pretrained("stevhliu/my_awesome_model")
>>> with torch.no_grad():
...     logits = model(**inputs).logits
```

Get the class with the highest probability, and use the model's `id2label` mapping to convert it to a text label:

```py
>>> predicted_class_id = logits.argmax().item()
>>> model.config.id2label[predicted_class_id]
'POSITIVE'
```
</pt>
<tf>
Tokenize the text and return TensorFlow tensors:

```py
>>> from transformers import AutoTokenizer

>>> tokenizer = AutoTokenizer.from_pretrained("stevhliu/my_awesome_model")
>>> inputs = tokenizer(text, return_tensors="tf")
```

Pass your inputs to the model and return the `logits`:

```py
>>> from transformers import TFAutoModelForSequenceClassification

>>> model = TFAutoModelForSequenceClassification.from_pretrained("stevhliu/my_awesome_model")
>>> logits = model(**inputs).logits
```

Get the class with the highest probability, and use the model's `id2label` mapping to convert it to a text label:

```py
>>> predicted_class_id = int(tf.math.argmax(logits, axis=-1)[0])
>>> model.config.id2label[predicted_class_id]
'POSITIVE'
```
</tf>
</frameworkcontent>