Datasets:

mattymchen

/

refinedweb-3m

like 5

Last week, I attended “The God Debate,” and I wasn’t the only one. Students, faculty and community members packed IRC 120 for the event sponsored by Student Secular Alliance and the Truth Discovery Project. Despite arriving ten minutes before the event began at 7 p.m., there was only standing room. Early birds filled the chairs and late arrivals sat in the aisles or lined the back wall. Apparently, people were quite eager to hear Stephen Kozak, a Christian author, and Justin Schieber, co-host of an Atheist radio show, debate the existence of God. However, I don’t think the event was what the crowd was expecting. Media personalities like Rush Limbaugh and Bill O’Reilly have given Americans the false impression that debate includes raised voices, inflammatory words and finger pointing. Rather than arguing the issue itself, Limbaugh and O’Reilly choose to attack the character of the individual they are opposing. Although Kozak and Schieber’s beliefs are on opposite ends of the spectrum, the two speakers treated one another with dignity and respect. The debate was civilized—a concept unfortunately foreign to too many people. In addition to being civilized, both speakers were intellectual. It was refreshing to witness two sides arguing so eloquently. My biggest revelation at the event had nothing to do with the existence of God. “The God Debate” reemphasized the importance of critical thinking. Too often people, myself included, get caught up in the hustle and bustle of their daily lives and forget to take an analytical approach to the world around them. I understand philosophical debate isn’t part of most people’s daily routine, but the importance of well-reasoned and civilized debate cannot be understated. Imagine what the world would be like if more people approached controversial issues with a critical mindset.

Guest commentary: Jet noise reduction proposal will need public help Happy Thanksgiving season to all and we hope this finds you well. This is our Quiet Skies update for November. We are actively engaged with the San Diego County Regional Airport Authority on potential noise reduction efforts and we are hopeful for a positive step forward in December. The Airport Authority is considering several flight operation proposals that could disperse and reduce jet noise for all communities and be especially helpful between 10 and 11:30 p.m. for the northern coastal communities. In July, Quiet Skies submitted a flight operation proposal in the Part 150 Study from our expert consulting firm. The proposal, now called “Three SIDs with Dispersal,” calls for three departure tracks from the usual western runway at San Diego International Airport. Each track in our proposal also has a new proposed waypoint further offshore, marking the course planes fly before they can begin left and right turns. The result would keep planes farther from our coastline. In general, eastbound flights would remain on the southernmost track, flights to Hawaii and Asia would be on the middle track and northbound flights would be on the northernmost track. The departure paths would equitably distribute noise among Point Loma, Ocean Beach, Mission Beach, Pacific Beach and La Jolla across all hours. Currently, all nighttime departures between 10 and 11:30 are routed north from the airport and fly past the Mission Beach, Pacific Beach and La Jolla coast. The proposal’s benefits to the coastal communities would be substantial. For La Jolla, it would keep northbound flights about one mile farther offshore compared with their present track. At the October Citizen Advisory Council and Technical Advisory Council meeting, the airport’s consultants indicated their intention to reject our proposal on a technical ground but also agreed to model a variation. In early November, we filed additional comments explaining why the consultants’ technical ground for initially rejecting our proposal is wrong. Our comments can be found at quietskieslajolla.org/noise-mitigation and relate to counting the net number of new people and households within the 65-decibel contour directly around the airport. We are hopeful that the consultants advance at least several of the community’s proposals to the Airport Authority at the next meeting in mid-December for consideration by the Federal Aviation Administration. Our Airport Noise Advisory Committee representative, Dr. Matthew Price, also has formally requested that the Airport Authority ask the FAA to place a new noise dot adjacent to La Jolla to prevent the overflights that have been plaguing La Jolla over the past year. The FAA has been sending eastbound flights directly over La Jolla rather than adhering to the departure path over the ocean and south around the tip of Point Loma. This is subjecting La Jolla to low-flying planes directly over our homes, parks, schools, businesses and places of worship. Your feedback and written comments will be extremely important on all these issues in late December and early January, so please watch the Point Loma-OB Monthly for the next update and details for how to submit a comment. The Airport Authority needs to hear your voice. For further information, visit quietskieslajolla.org. Anthony Stiegler is co-founder and secretary of Quiet Skies La Jolla.

Dallas Airmotive Launches Price CAP Promise Program, Additional Rewards When Scheduling Maintenance at NBAA BBA Aviation Global Engine Services Company Expands Support Options to Include Tiered Not-to-Exceed Pricing Service Packages for B&GA Customers Worldwide October 10, 2017 NBAA – Las Vegas – Dallas Airmotive, a BBA Aviation company, is announcing the release of its latest service program, Price CAP Promise, with bonus rewards for customers that schedule their engine maintenance at NBAA. Through the new program, aircraft owners and operators with select engine models needing overhaul can take advantage of the flexibility and price surety of tiered, not-to-exceed pricing packages to fit their maintenance needs. Dallas Airmotive’s Price CAP Promise program gives customers operating various PT6A, JT15D, PW500 and TFE731 engine models an option to select from one of three service packages: Complete, Advanced and Premier. To celebrate this new offering at NBAA, additional benefits are provided to customers who select one of the service packages for their next maintenance event, ranging from an AvCard loaded with up to $10,000 in fuel rewards to discounted rental engines. “Our customers have consistently communicated that their needs for engine maintenance depend on their specific situation – Price CAP Promise is a product of us listening to our customers and making it our top priority to serve them better,” Mark Stubbs, Chief Commercial Officer of Global Engine Services said. Further, Stubbs said the organization’s goal is to provide customers with an experience that is custom-fit to their requirements. In addition to a conventional labor and parts pricing model, the three-tiered support program offers Dallas Airmotive’s capped pricing promise, allowing customers to budget for their next engine overhaul without unforeseen additional cost. “For aircraft owners and operators, servicing their engines isn’t optional, but the options we provide deliver quality benefits that go even further than a capped price,” Stubbs said. “Our services feature extended warranties, access to the largest global field service network in the industry, customized overhaul packages and expert technical support.” Dallas Airmotive is attending NBAA’s 2017 Business Aviation Convention & Exhibition, October 10-12 in Las Vegas, Nevada. For more information on the Price CAP Promise program, stop by BBA Aviation booth #N5500 to visit with the company’s engine experts about your next engine solution, or contact your Dallas Airmotive-Preferred Independent Aircraft Service Center., Portsmouth, UK, and Abu Dhabi, UAE, as well as 9 regional turbine centers. ###

This is probably the number one question I get when helping people plan their vacation: “When do I need to . . . “ or “How soon can I . . .” I’ve said it before, Walt Disney World vacation planning can be confusing and it is definitely complex. There are a lot of dates to keep in mind, and I always say the sooner you can start the process the better. Here are some basic tips for a timeline to plan your vacation: Resort Package/Reservations (ASAP, 7 months+ is ideal): You can book a room only reservation at WDW up to 499 days in advance. However, when you do this there will not be accurate pricing for your travel dates yet. Once the real price comes out for your dates your room total will automatically adjust accordingly. You also can’t do this online, you have to call your Travel Agent or Disney directly. This is only really necessary if you want or need a particular room type that you know is in high demand and that there are few available. Most people prefer to wait until the accurate pricing is out and they can book with a package. Normally, this is released in July or August for the following year. At this point you can book your entire package with tickets and dining by contacting your Travel Agent, calling Disney, or booking online. I encourage everyone to book their resort and as far out as possible. Ideally you want to have that in place well before 6 months before you travel so that you can have the best chance at the rest of your reservations. And don’t worry about a discount coming out later—you can still apply it to your existing reservation for a savings if your dates, resort and room type are eligible and available. Itinerary (6 months+) As soon as you have your resort booked, the next thing you need to do is map out a basic itinerary of which parks you will be in on each day of your vacation. Disney normally releases park hours 6 months in advance, so that helps in choosing where you want to be. I also recommend checking websites like touringplans.com and wdwprepschool.com for their crowd calendars and recommended park days to assist you in choosing the least crowded park for each day. Once you have that figured out you will know where to book your dining for each day. Dining (180 days prior to check-in) To get the most popular dining destinations you really need to book on the first day possible—which is 180 days in advance. You can use several sites to determine your date, I like this one: . If you are staying onsite at a Disney resort you can book your reservations starting at that 180 day point, and you can make more reservations for up to 10 days after that (the 180+10 rule as it is called). Offsite guests have to make them one day at a time. On that day you can begin making the reservations online at 6:00am (eastern) or call in at 7:00am (eastern). The majority of “table service” dining locations open their reservations at 180 days, but you can also book the counter or quick service location of Be Our Guest at 6 months out following the same procedure. About 30 days out you should see a link appear in your My Disney Experience account that also allows you to pre-order your food before you arrive—if you think you know what you will want to eat this does save a considerable amount of time. Magic Bands (as soon as you book, by 30 days out) As soon as your reservation is linked to My Disney Experience you can customize your Magic Bands. There will be date listed to complete this step which is normally by 30 days before you travel (there seem to be some exceptions to that if you book later). They are mailed directly to you and arrive about 2 weeks prior to your vacation—you can usually track their progress in My Disney Experience (Happy Disney Mail part 1). If you are arriving pretty soon after your reservation then you may just pick your Magic Bands up at the resort. For a no obligation, FREE Quote with new bookings contact our sponsor Magical Vacation Planner by calling: 1(407)442-0289 Or for a free no obligation quote with new bookings you can fill out the form by Clicking HERE! Flights (60 days+, with some caveats) If you are flying down you want to get the best price, and a site like kayak.com will help you decide on when to buy with their confidence rating (whether they feel the rates are going up or down). While you definitely want to take advantage of that, I recommend waiting until after you’ve made your resort package reservation and your dining reservations. With the not-so-lenient cancellation and change policies on airfare, you definitely want to make sure that you are able to get the resort reservation that you want before you book air, and if dining is a make or break part of your vacation you may want to wait to make sure you can get what you want for that as well. If you’ve followed the rest of the timeline I recommend scheduling flights at least 60 days out (again based on the fare recommendations) so you have time to link them to your reservation for Disney’s Magical Express if you are staying onsite and receive your tags with your travel documents. FastPass+ (60 days prior to check-in) You can begin making FastPass+ reservations at midnight 60 days before you check-in if you are staying onsite, or 30 days if you are an offsite guest. At that point you can make them for the length of your ticket—so if you have 5 days you can make all 5 days’ worth of FastPass+. Final Payment (45 days, or at check-in) Final Payment on WDW packages is due 45 days prior to check-in. For room only reservations onsite you pay the balance upon check-in. Travel Documents (2 weeks prior) If you booked a WDW package you will receive a booklet of vouchers for the various elements of your package, along with some discount coupons and souvenir luggage tags. If you are using Magical Express it will also contain the yellow luggage tags to identify your luggage to Magical Express. These normally arrive about 2 weeks prior to your vacation. Part 2 of your Happy Disney Mail. Room only reservations do not receive travel documents—I would recommend printing your confirmation and bringing it with you. Packing (2 weeks) This is really personal preference, but I like to start with my list and setting aside things about 2 weeks prior to my vacation. It is like I am going on a desert journey & I don’t want to forget anything. Last Minute (24-48 hours prior) - Double check all of your travel papers and documents. Pack them in a carryon bag—put your Magic Bands in a carryon bag. Make sure you have ID - 24 hours out complete online check in with your airline - Try to sleep—I know this is the hardest thing because “you’re too excited to sleep!” That is the basic timeline I like to follow when advising when to do things planning a Disney vacation. Of course, you may not be able to start so far in advance. If you don’t book until a few months before I would prioritize: Resort, Dining, Air, FastPass+. And these could all be done on the same day if you are booking 2 months or less out. Good luck & Happy Planning!

Wait! Why you should book this villa? You have found a villa with a great beach membership!** Montego Bay Yacht Club and Seawinds Membership + Captains Watersports activities!! Click here to read more !! Spring Garden Villa, is a new 4 bedroom villa, with one of the most spectacular district views of Montego Bay, a spectacular night show of twinkling lights at night! Nestled in the hills of Spring Gardens gated community, lies this newly built luxury villa. Spring Garden Villa boasts a panoramic view of the Caribbean Sea, overlooks the magical city of Montego Bay and the lush hill side of Spring Gardens. It has a well manicured lawn with beautiful flowers throughout the property. This 4 bedrooms villa is tastefully furnished with exquisite modern décor, mimicking a Suburban-style home. At the front of the villa, is an infinity edge pool with a picturesque backdrop of the Caribbean Sea. Around the pool, is a creatively designed deck that leads you through the front door of Spring Garden Villa, where you will be charmed by the stylish living room. Adjacent to this is an 8-seater contemporary dining area which opens to the kitchen. On the same level, you will find Bedroom # 1 & 2, while Bedroom # 3 & 4 are on the second floor. All the bedrooms have an air-conditioner and a comfortable king-size bed with a private bathroom. Seascape offers two twin beds convertible to king in ONE of the four bedrooms. Each room has an almost identical theme and is sophisticatedly presented. Bedroom #1 has a breath-taking view of the ocean and a stunning bathroom. There is a door from this bedroom that leads to the pool deck. Bedroom #2 has impeccable furnishings with unique bathroom fixtures. To make your way to the second floor, there is a well polished wooden interior staircase. This takes you to a lounge area equipped with a flat screen TV and a ceiling fan. Bedroom # 3 is the Master Bedroom which has a stunning view of the Caribbean Sea, an exaggerated bathroom with massage shower, bath and a walk-in closet. Bedroom # 4 has access to an outdoor patio adorned with contemporary wicker furnishings that can seat 4 persons. Nightlife Spring Garden Villa is the ideal villa for families or couples and is approximately 6 miles from Montego Bay. There are so many activities to choose from! Less than 10 minutes drive to Pier One, Margaritaville and Acropolis Gaming Lounge; perfect for anyone in need of exhilarating entertainment and a lively atmosphere. Let's not forget that this villa comes with a complimentary membership to the renowned Tryall Club. Amenities BBQ Poolside bar Outdoor shower Infinity Swimming pool which has views towards Montego Bay! Spectacular! Fully staffed villa Beach Membership for all guests - a short 8 minute drive away to Beach Club Resort facilities - First Class! TV upstairs in the family room TV downstairs in the family room - Largest Flat Screen TV Samsung Smart TVs in all the bedrooms = 4 TV in 4 bedrooms, all flat screen TV Total of 6 Televisions There are 2 safes available for clients * Comfortable lounges and bar for relaxation * 10% discount off food and beverage at The Seahorse Grill restaurant based at Montego Bay Yacht Club Spectacular seaside dining with magnificent views of Montego Bay Reservations: (876) 684 9133 * Watersports Facilities for your ** Membership to for all guests staying at this villa! Jamaican Treasures offers leading luxury villas in the most exotic and beautiful Jamaican locations. From beachfront and waterfront villas in Jamaica to villas on gated communities and rural settings. Each one of our Jamaica villas has been inspected by our staff to ensure properties and service is of the highest quality. Jamaican Treasures is able to offer you the very best holidays, wedding receptions and services. We have villas in Montego Bay, Ochos Rios, Runaway Bay, Discovery Bay, Tryall Club, Round Hill Resort Villas and the Half Moon Club to name just a few and our luxury villas range from 1 bedroom honeymoon rentals right up to the largest villas with 10 bedrooms and more which are ideal for wedding receptions. Tryall is a private club is one of Jamaica's premier resorts in Montego Bay. Amenities include tennis,18 hole championship golf course, beach, water sports, the excellent gym, the Kids Club, Great House afternoon tea and various special events. TRYALL MEMBERSHIP: Complimentary beach, 9 tennis courts, gym, pool, Hummingbird Kids Club, non-motorized water sports, Internet room, art gallery, jogging trail, afternoon tea & Manager's Cocktail Party. For. courts for a total of 9 tennis courts! *

Hyundai i20 Active's AC is best among Indian hatchbacks! It's the hottest time of the year and we, at OVERDRIVE, haven't been taking it easy and cooling off in the shade. If fact, we've been doing just the opposite. Over the past week, we've been out, busy testing the air conditioners of several of the newest cars in the Indian market. We've covered a bunch of segments and vehicles from different manufacturers. But first, head to this link to read about the parameters of this test. Done reading the parameters? If not, go back now and read them first! Alright, now here's how the eight hatchbacks in our test fared. The car which came out on top is the one which managed to get the lowest temperature in the cabin. We've also rated six major factors for every car's air-conditioning unit and here's what the ratings mean: 5/5: Very Good 4/5: Good 3/5: Average 2/5: Poor 1/5: Very poor 1. Hyundai i20 Active Min cabin temperature achieved: 24.7°C - 5/5 Rate of cooling: 5/5 Circulation: 1/5 Vent temperature: 5/5 Blower speed: 3/5 Noise: 2/5 The Hyundai i20 Active's automatic climate control system turned out to be one of the best units in the test. It managed to achieve the lowest cabin temperature and it did so very quickly too with an excellent rate of cooling. Within two minutes of starting the test, the temperature of the air from the AC vents went from 56°C to a chill 19.6°C. By the end of it, the vent temperature had dropped further down to a chilling 10.9°C. While the rear vent temperature was around five degrees more, that's still pretty chill. The difference in temperature between the front and the rear of the cabin was more than in the other hatchbacks despite having a rear vent, which is why it scored quite poorly in terms of circulation. The blower speed wasn't too impressive either, with the wind emerging from the vent at around 30kmph. Despite that, the AC was quite noisy. 2. Mini Cooper S Min cabin temperature achieved: 29.2°C - 3/5 Rate of cooling: 5/5 Circulation: 3/5 Vent temperature: 4/5 Blower speed: 1/5 Noise: 2/5 The benchmark set by the i20 Active in this test is quite high. And that's quite apparent when you compare the difference in temperatures between the i20 Active and the number two car here, the Mini Cooper S. The biggest advantages that the Mini Cooper S has in this test are the comparatively small cabin and small windows. The car might be a touch under four-metres in length, but a lot of that is occupied by the engine bay. So even though the circulation was just decent and the blower speed poor, the rate at which the cabin cooled was very good. Also playing to its advantage is the vent temperature it dropped from 54.1°C to 14.9°C within two minutes. The vent temperature had dropped further to 12.2°C by the end of the test run. What was surprising was that despite the low wind speeds from vents, the amount of noise inside the cabin with the blower set at full blast was quite a bit. 3. Maruti Suzuki Baleno Min cabin temperature achieved: 29.4°C - 3/5 Rate of cooling: 5/5 Circulation: 3/5 Vent temperature: 2/5 Blower speed: 4/5 Noise: 3/5 The Maruti Suzuki Baleno falls short of the Mini Cooper S by just 0.2°C in terms of how cool the cabin got at the end of the test run. Like in the top two cars, the rate of cooling is very impressive with vent temperatures seeing a 34.5°C drop within the first two minutes. The Baleno doesn't get rear AC vents, but despite that the circulation is better than in the i20 Active. That said, the temperature at the rear passenger's location was a bit higher than in the i20 Active's. Another plus point for the Baleno is the impressive blower speed, with the wind from the vent hitting around 31kmph at the vent. Despite that, the amount of noise inside the cabin was lower than in the i20 Active and the Mini Cooper S. 4. Mahindra KUV100 Min cabin temperature achieved: 30.8°C - 2/5 Rate of cooling: 3/5 Circulation: 5/5 Vent temperature: 2/5 Blower speed: 5/5 Noise: 3/5 The Mahindra KUV100 might be just fourth in this list, but its manual air-conditioning system managed to do a better job than the automatic climate control units on some of the other hatchbacks. Compared to the benchmark set by the Hyundai i20 Active, the lowest temperature achieved by the KUV100 isn't very impressive. The rate of cooling is decent, with vent temperatures dropping by 28.6°C within the first two minutes. The lowest temperature we recorded at the vent was just 18.1°C. However, the KUV's strongholds are circulation and its blower speed. The KUV managed to set one of the highest blower speeds in the test with wind from the vents hitting around 36kmph, and without being one of the loudest either. Additionally, there was just a 0.2 degree difference in the temperature between the front and rear of the cabin. 4. Honda WR-V Min cabin temperature achieved: 30.8°C - 2/5 Rate of cooling: 3/5 Circulation: 5/5 Vent temperature: 3/5 Blower speed: 5/5 Noise: 2/5 Like in the KUV100, we recorded a lowest temperature of 30.8°C in the Honda WR-V, making it a tie for fourth place. The vent temperatures were better than in the KUV100, with a drop of 32 degrees in the first two minutes, and a lowest temperature of 15.4°C. However, the larger cabin and the larger glass area meant the rate of cooling was quite similar. Circulation was much better than in the i20 Active too, with a difference of 0.45 degrees between the front and the rear of the cabin. However, we recorded a temperature of 29.5°C at the rear, which is still a couple of degrees warmer than in the i20 Active. The Honda WR-V also managed to score very well in terms of blower speeds with the anemometer reading speeds of around 35kmph. However, it was comparatively noisy inside the cabin. 6. Hyundai Grand i10 Min cabin temperature achieved: 31.2°C - 2/5 Rate of cooling: 1/5 Circulation: 1/5 Vent temperature: 2/5 Blower speed: 3/5 Noise: 4/5 After the impressive results achieved by the i20 Active, we were quite surprised by how the Grand i10 performed in this test. The updated car, which now gets automatic climate control, just wouldn't go below the 31.2°C mark by the end of our test run. The vent temperature went down a minimum of 18.8 degrees which, compared to the i20 Active, isn't very good. Circulation was quite poor too with a difference of around 3.5 degrees between the front of the cabin and the rear, despite the car having a rear AC vent. What do work in its favour are the decent blower speeds (around 27kmph) and a significantly quiet cabin. 7. Renault Kwid Min cabin temperature achieved: 31.4°C - 2/5 Rate of cooling: 3/5 Circulation: 4/5 Vent temperature: 2/5 Blower speed: 3/5 Noise: 2/5 The Renault Kwid missed sixth place by just 0.2°C. While the lowest cabin temperature it could achieve isn't great, it does score pretty well in other areas. For instance, vent temperature dropped by 40.4 degrees within the first two minutes. At 18.4°C, the lowest vent temperature isn't really impressive, but the rate of cooling is quite good since the cabin is pretty small and the glass area isn't a lot. Circulation is pretty good too with a difference of 0.95°C between the front and the rear of the cabin. While we did record a good blower speed of around 29kmph, it does get quite noisy inside the cabin. 8. Maruti Suzuki Ignis Min cabin temperature achieved: 35.6°C - 1/5 Rate of cooling: 2/5 Circulation: 3/5 Vent temperature: 1/5 Blower speed: 3/5 Noise: 4/5 The Maruti Suzuki Ignis sits last among the hatchbacks in our ultimate AC test, and by quite a margin. Compared to the lowest temperature achieved by the i20 Active, the Ignis was hotter by over 10°C! The Ignis we tested is the one from our long-term fleet, and doesn't feature automatic climate control since it isn't the top-spec variant. While the front vent temperature dropped a fair amount from 51.7 degrees to 24.8 degrees in the first two minutes, it didn't go very far from there. The lowest temperature we recorded at the vent was 22.2°C, which is quite off the mark compared to the other hatchbacks in this test. However, the Ignis does score fairly well in terms of circulation, with a difference of around 1°C between the front and rear of the cabin. The blower speed is decent too, and the cabin is comparatively quite when the blower is at full blast. Also from OVERDRIVE: Hyundai Creta's AC scores highest among SUVs and MUVs in India Hyundai Elantra's AC rated highest among sedans in India Ultimate Indian automobile AC test: The testing parameters Then and now: When ACs were not common in cars Simple Tech: Air conditioning and ozone explained Starts Rs 3.75 Lakhs 999cc Manual 68 91 22.5 Kmpl Starts Rs 9.92 Lakhs 1498cc Manual 100 200 25.5 Kmpl Starts Rs 9.79 Lakhs 1396cc Manual 90 219.6 21.38 Kmpl Starts Rs 19.23 Lakhs 1582cc Automatic 128 260 18.23 Kmpl Starts Rs 7.33 Lakhs 1186cc Manual 75 194 24.95 Kmpl Starts Rs 8.34 Lakhs 1197cc Automatic 84 115 21.4 Kmpl Starts Rs 7.01 Lakhs 1197cc Automatic 83.5 113 20.89 Kmpl -NA- 1493cc Manual -NA- -NA- -NA- Starts Rs 34.9 Lakhs 1998cc Automatic 192 280 14.59 Kmpl Starts Rs 31.5 Lakhs 1998cc Automatic 192 280 15.75 Kmpl Starts Rs 4.53 Lakhs 999cc Automatic 68 91 24.04 Kmpl Starts Rs 9.2 Lakhs 1197cc Automatic 105 175 17.21!

I decided to split the original blog post into two separate posts as “Secure” Flash/MySQL DB calls is fairly short, and it was scattered about in a post more on how to set up a High Score DB with AMFPHP. So this will be a couple of very specific tips and things to set up when adding any sort of user-entered data from flash ( or PHP! ) to touch your database. You know the rule… never trust any data. Always make sure you strictly data type variables and typecast user-entered variables. First up, as the user enters data into Flash, via an input TextField, use the .restrict setter to restrict characters entered to only characters that you need. This is the first layer of protection against SQL injection attacks , and just follows the same sort of common sense “best practices” type of coding as datatyping variables. nameInputTxt.restrict = "A-Z a-z 0-9"; This will restrict the characters allowed in this textField to only alpha-numeric, capitals and lower case. This excludes potential Injection-prone characters like the single apostrophe ” ‘ ” and semi-colon ” ; ” keys. After that data gets entered, we’re going to send those variables thru AMFPHP into our PHP Class. In the case of our High Scores Database example, we’re sending both the nameInputTxt data, as well as an integer based score value which gets handled by the following PHP code: function addScore( $pName , $pScore ) { $created = date( "Y-m-d H:i:s"); $cleanName = mysql_real_escape_string( $pName ); $cleanScore = intval( $pScore ); return mysql_query( "INSERT INTO $this->table SET `name` = '{$cleanName}' , `score` = $cleanScore , `created` = '{$created}' "); } You’ll see the $cleanName and $cleanScore variables a couple of lines into the function. For String type user-entered data, always run it through PHP’s mysql_real_escape_string() function. If somehow a single apostrophe made it this far, PHP will automatically “escape” the apostrophe adding a back-slash before: \’ instead of a dangerous ‘ As far as $pScore goes, we’ll send it thru PHP’s intval() function which will truncate any decimal portions as well as attempt to return an integer value for any data it comes across. This means if something crazy happened and malicious String code made it this far, if intval() could not find the proper integer to represent the data, it will return 0. And submitting a zero, even though it might be wrong, is infinitely better than having DROP TABLE code injected into the call. That’s it For More info on securing the actual AMFPHP install and files, check out Lee Brimlow’s Flash Blog post, AMFPHP Security Basics

ishtiaq ahmed - Assistant Manager - Yousuf Dewan Companies ... 2009 - 2012. Licenses & Certifications ... Issued Apr 2015. Groups Gulf Jobs - Vacancy - Careers in Gulf UAE Saudi Bahrain Qatar Oman - Employers Job Seekers Group Gulf Jobs - Vacancy - Careers in Gulf UAE Saudi Bahrain Qatar Oman - Employers Job Seekers Group ... Jobs in Cement and Industrial Sector -Cement and Heavy Industry Openings in the ... Halliburton in spotlight in gulf spill probe - Los Angeles ... May 01, 2010· Halliburton has been accused of performing a poor cement job in the case of a major blowout in the Timor Sea off Australia last August. An investigation is underway. CiteSeerX — SPECIAL CONSIDERATIONS IN CEMENTING HIGH ... The case studies of the Montara well blowout 2009 and Gulf of Mexico 2010 showed that one of the main contributing factors to the failure was the substandard cement job. During the 2012 HPHT Wells Summit, HPHT professionals were surveyed about the most critical technology gaps in the HPHT operations. Server Error - Job Search - Employment - Job Vacancies Search Jobs; Login; Create Job Alert; Report a Problem; Naukri Blogs; Mobile Site; Browse Jobs; Browse All Jobs; Premium MBA Jobs; Premium Engineering Jobs; Govt. Jobs; International Jobs; Jobs in Gulf; Jobs by Company; Jobs by Category; Jobs by Designation; Jobs by Location; Jobs … Client interview - Latest Gulf Jobs & Jobs Abroad Mar 14, 2021· The most innovative & fastest growing online recruitment portal for indians to gulf countries, jobs in dubai, UAE, Qatar & All gulf jobs. Ejadah Asset management Group vacancies - Client interview Toggle navigation NATIONAL CEMENT COMPANY | CareersInGulf.com Jobs Post your Resume and find Gulf Jobs on CareersInGulf.com. Best career site in Gulf. 39M+ Active Job Seekers 11000+ Active Employers Top Free Jobs Posting Site in Gulf Sign-up and Advertise Jobs Free ... Listing all jobs offered by NATIONAL CEMENT COMPANY ! No job posts found. RECOMMENDATIONS. Browse Jobs by Employer. Browse Employers: 0-9 A B C ... Working at Gulf Cement Company | Glassdoor See what employees say it's like to work at Gulf Cement Company. Salaries, reviews, and more - all posted by employees working at Gulf Cement Company. Here For You During COVID-19 NEW! United Gulf Cement Co. | LinkedIn United Gulf Cement Co. | 81 followers on LinkedIn. United Gulf Cement Co. is a computer software company based out of Iran. Mahmoud Hassan - Quality Assurance Manager - United Cement ... Mahmoud Hassan | السعودية | Quality Assurance Manager at United Cement Industrial Company | Optimization of quality parameters to achieve the production volumes and dispatch requirements within the standard limits. using alternative solutions and apply new techniques with minimum cost to enhance company profit. | 500+ من الزملاء | عرض صفحة Mahmoud الرئيسية ... UGCC – United Gulf Construction Co. W.L.L. ... 15 Stores Cement Jobs and Vacancies - June 2021 | Indeed.com 15 Stores Cement jobs available on Indeed.com. Handle sales at our retail shops/ outlet dealing in paints and cement products etc, opening the store and managing the daily sales at the outlet, manage orders, conduct promotions, explain various products and schemes to the end user, covey the benefits, build good relationship, offering top notch customer service, daily mis of sales,stock ... saudi cement vacancies in lubrucationas - BINQ Mining Nov 29, 2012· Posted at:November 29, 2012[ 4.6 - 1305 Ratings] Saudi Cement Company – شركة الاسمنت ... cement plant Jobs in Gulf – cement plant Gulf Vacancies. Lubrication Engineer. 10000- 14000 Dhs ... cement kiln operator jobs in gulf mining - cement kiln operator jobs in gulf. … Instrumentation Foreman Jobs In Cement Plant Or Crusher In .... Al Khalij Cement Company Al Khalij Cement Company (AKCC) is a subsidiary of Qatari Investors Group Light Industries (QIG Light Industries); a supplier of building materials and services to many of Qatar's completed and developing iconic projects. In addition, QIG Light Industries has shareholdings in companies that offer formwork and scaffolding systems, fabrication ... United Gulf Cement Careers | United Gulf Cement Reviews ... Jun 04, 2021· Current Jobs in United Gulf Cement. Jobs 3. Accountant. United Gulf Cement - Qatar. Apply Now. 14 Jun 2021. Must be a university graduate with Bachelor in Accountancy and 5 7 years in General Ledger. Knowledge in MS package and computerized accounting system peachtree. Gulf experience is preferableJob Types: Full time, PermanentExperience ... Cement plant jobs in gulf - Trending abroad jobs The most innovative & fastest growing online recruitment portal for indians to gulf countries, jobs in dubai, UAE, Qatar & All gulf jobs. Cement plant jobs in gulf - Trending abroad jobs +91 9048483618 Er. Moniraj Das - DCS Engineer - Hills Cement Company ... 2012 - 2015. Silchar polytechnic ... Groups GULF OIL & GAS JOBS GULF OIL & GAS JOBS -View Er. Moniraj's full profile ... MBA in Marketing having 16+ years of Sales & Marketing experience including 13+ years in Cement Industry Kolkata. sadees kumar. Various Job Vacancies at Qatar National Cement Company - Qatar Mar 02, 2020·. Gulf cement company interview in hyderabad Gulf cement company interview in hyderabad Products. As a leading global manufacturer of crushing, grinding and mining equipments, we offer advanced, reasonable solutions for any size-reduction requirements including, Gulf cement company interview in hyderabad, quarry, aggregate, and different kinds of minerals.ً. الإبتكار والإبداع. حاصلة على شهادة الجودة ... zambia cementplant mechanical jobs - BINQ Mining Feb 28, 2013· cement plant recruitment 2012 - greenrevolution.org.in Jaypee Group Recruitment for its Cement Plants | The Job. jpee cement plant walk in interview. Related posts: Jaypee Group Recruitment for Cement & Captive Power Plants in AP & Karnataka – 2014.L&T vacancy for civil engineers in vizag 2014. l&t recruitment 2012 for mechanical engineers. Antar Rabhi - Cementing Supervisor - Schlumberger | LinkedIn Start with BJSP as a cementing Trainee, worked my way up to Cementer working on onshore in all aspects of Oil field cementing ( all size casing 30"-18 5/8-13 3/8 – 9 5/8- 7" -4 ½ ) BJ- lite, Hi-dense,special cement .. acidzing, pumping .with BJ Cement Unit PSM system,RAM Unit, Batch mixer, prepare the tickets of all jobs ... Hammad Raza - QHSSE Manager - National Cement Factory ... Maple Leaf Cement Factory Limited 2009 – 2012 3 من ... Jobs in Cement and Industrial Sector. Safety is about culture. Health, Safety, Environment and Quality Jobs. Cement, Concrete and ... Working at Gulf Cement Company | Glassdoor Interview. after my stay for 5 monts in UAE i got a chance through my sponcer to apply for :Gulf cement company: so on behalf of his highness i applied and got success to be hired after 3 interviews when they checked my communication skills, knowlwdge, qualification, personality . so thenafter i joined it on 6-march 2012 and till now i,m working here in a very friendly & peaceful job ...-Heater, Pre-Clinker System. The company once fully operational shall produce 600TPD (or any alternative capacity to be decided ... Prageeth Wijethilake - Director - Laklapro Comercio ... 2012 - 2014. Activities and Societies: MBA Alumani ... Jobs in Cement and Industrial Sector Jobs in Cement and Industrial Sector -Sports Sponsorship Sports Sponsorship - ... Oil and Gas Jobs ASIA Singapore Australia Malaysia Indonesia Vietnam Russia China Gulf Dubai Qatar -Cement… - zenith mini cement plant project - pics of a kiln in a cement plant - cement plants in jakarta indonesia - mill scale for making cement - cement and steel requirement for 100 sft - yanbu cement company jobs 2012 - daily maintenance checklist of cement mill - employment raw mills cement qatar - ultratech premium cement price per bag at kolkata 2012 - ball mill for cement grinding in india - cement mill traylor - lafarge cement nimbahera it job - crushing limestone in cement plant - cement crushing plant cement crusher cement grinding - crushed gypsum cement grade - cement production line cement plant cement making - cryogenics grinding cement - tell me about plc cement company malaysia

Beautiful Inle Lake, in the highlands of Shan State, is one of Myanmar's top tourist destinations. It is served by Heho Aiport, which is where we land after a short flight from Bagan. To our astonishment there is an immigration booth. We have just arrived on a domestic flight, so I have no idea why our passports and visas get checked again, but they do. We spend about an hour in a car, for the first time in Burma we are driving through some hilly terrain. We pay a 5 USD fee to enter the Inle Lake area, which I knew about. What does surprise me is that we need to pay for our 9 year old daughter too. So far all entrances in this country were free for her. We reach the village of Nyaungshwe, where we transfer to a narrow wooden boat so typical to the lake. When the engine is off I constantly feel like we are going to tip over. When the engine is on the noise is deafening. Life vests and umbrellas (against the burning sun and splashing water from passing boats) are provided. The boat ride is absolutely lovely. Most of it is not on the lake itself, but on the Nan Chaung canal. As we will soon find out it is quite hard to determine where the lake starts anyway, because it is surrounded by large areas of marshes. I do a bit better with stationary targets, the stilt bamboo houses so common on the lake. There are entire villages built over the water. Seeing these it really sinks in how much life is lived not only around the lake, but also directly on the lake. Watching people going about their everyday chores, like washing the dishes, on the steps of these houses, is a unique experience. By far the most famous, and perhaps most bizarre, feature of Inle Lake is the traditional leg rowing practiced here. Pretty much any picture you see of the lake is likely to show a fisherman rowing with his leg. But for some reason I thought that this was an already disappearing tradition, perhaps only practiced by a handful of old man, or simply as a demonstration for tourists. To my surprise leg rowing is very much alive, and we constantly see it being used on the lake. As we approach our hotel, the Inle Princess Resort, the engine is switched off, and a young man hops on-board to leg-row us into our destination. This happens every time we arrive to or leave the hotel, I wonder if it is simply a way to keep the noise of the engines away from the hotel (they really are very noisy). Another interesting thing we see here is a bamboo "speed-bump" stretched out across the water. We will be seeing many of these around villages on the lake. Still fuming from this nasty exchange, and determined not to let it destroy our stay, we head to the restaurant terrace for a late lunch. The food (in my case baked Shan tofu with vegetables) is good and the view is lovely. There is a little island just in front of us, with resident rabbits. A local farmer brings his water buffalo there every day (farmer in boat, animal swimming) , so my guess is that the island is part of his farm. Our private terrace has a view of the lovely grounds, and our daughter is thrilled to discover that there is a bird-watching kit in the room (complete with binoculars and a book) which she can use during our stay. She will be carrying it everywhere we go. This being a cabin surrounded by nature, the occasional ant in the bed is normal, but otherwise the room is very clean. There is no TV, but there is a phone, which is only useful to call reception. In general telephone usage is annoyingly cumbersome in this country. We experienced it already when we tried to call the Burmese hotels from our home in France. Even if we were successful at getting connected, the line was usually so bad that we could barely understand what was being said. And trying to place an international call from Burma in most (even fancy) hotels requires going to reception, where they seem to have one special cell phone for international calls, which they will dial for you as long as it takes to get through. Usually at least for 10 minutes. And the price reflects the effort. At 5:30 pm we head to the restaurant terrace for drinks in the sunset. The local Sauvignon Blanc (Lonely Planet calls Shan state "the Bordeaux of Burma") is very pleasant, even for my taste buds so spoiled by years of living in France. But the main attraction is the view. The fiery red sun reflecting on the water is absolutely breathtaking. And yes, there are men leg-paddling into the sunset. Lovely. Day 2: We wake up at 7 am and it's chilly. For the first time in Burma I need to wear a sweater. We can hear the helicopter-like noise of the boat motors in the distance. After breakfast they escort us to our waiting boat and introduce us to the boat driver. We are heading out for a whole day on the lake. Based on what we want to see Kinkin, the very nice lady at reception, prepared a numbered list of stops for us. It's in both English and Burmese, which makes it easier to communicate with our boat driver. If we for example want to skip something, we can just explain this by pointing to the list. This makes me feel good, given the difficulties we experienced when trying to communicate with our Bagan taxi driver a couple of days earlier. After a couple of minutes we reach the open water and we accelerate even more. At this speed it is quite cold, even under the covers provided to us. But the approximately one-hour ride is worth it. There is so much life out on the water. We see a lot (a lot!) of leg-paddling fishermen and a group of people harvesting seaweed (to be used in their famous floating gardens - more about these later). There are also lots of birds out here. Watching the fishermen work I can guess where the idea of the uncomfortable-looking leg-rowing came from. Paddling with their leg frees up one of their hands, making it possible to handle the net while rowing. Makes sense. One of the must-dos on my list was visiting the floating market at Ywama, but Kinkin told us that, because of the low water levels, it is not held these days. She proposed a visit to Nampan's market instead, and that's where we are heading. I have read that markets rotate in a 5-day cycle through various villages around the lake, so I made sure to check with Kinkin (twice) that it really is at Nampan today. Imagine our surprise when we get there and there is ... nothing. We pull up to a place, the driver points to the empty space and says "Nampan market". We just look at each other, is he joking? Just to make sure I ask "Nampan market? No market today?". The answer: "sorry, no market". Well, the sightseeing didn't start out very well, but I am not really annoyed. The ride itself was worth it. And I like Nampan. With all of it's houses built on stilts above the water I find the village picturesque. There is a certain Venice-like quality about Nampan, in fact the hotel booklet calls it "the Venice of the East". The arrival to Indein (Inthein) is a complete anti-climax. There are way too many tourists, and we are dropped off basically into a touristy handcraft market. So my first impression is not the most favorable. But if I look hard enough, past the crowds of foreigners, I can see charming scenes of local life. OK, let's give this place a chance. Behind the handcraft market we take a quick look at the ruins of the Shwe Inn Tain Monastery, then stroll between more market stalls and across a bridge toward the village's main sight. Having just arrived from amazing Bagan, with its thousands and thousands of temples, I don't expect to be impressed. Inle Lake is the fourth stop in our Burma trip, and we are starting to suffer from pagoda-fatigue. How many more of these can we see? But as soon as the first stupas appear, my jaw drops. There seems to be an infinite number of them, densely packed next to each other, old and new, one more beautiful than the other. Especially the older structures, which create an almost other-worldly atmosphere. A very special place! Back to the village, where we stroll through the more interesting part of the market, the one with spices, dried fish and other goodies. Yes, Kinkin was wrong. The 5-day rotation brought the market to Indein (Inthein) today, not to Nampan.It's very hot by now, so we have a drink at the waterfront. The place is quite a zoo, with tourists, locals, and boat drivers all converging at this location. There are a huge number of boats waiting for tourists they dropped off, and for a moment I am worried that we will not find ours. But the driver finds us, and we set out again, back on the fun ride down the canal. Kinkin has put a couple of workshop visits on our schedule, and we are seasoned enough travelers to know what these mean. A little demonstration, a little tour, and then (no pressure) the hope that we buy something. I don't particularly mind, as I know that this is a way to support the local economy. But I also don't want to spend my day hopping from one workshop to another. So my husband and I agree that we will only visit two. We start with a silversmith, where, as expected, we get an explanation on how the jewelry is made, then end up in front of the store displays. It's not cheap, but it's quite nice, so my husband buys me a necklace - you might say that it was my woman's intuition which made me not skip this workshop :-). We skip the traditional umbrella making and Shan paper making, but we do stop at a souvenir shop. It is the only store which I really wanted to visit, though probably for all the wrong reasons. As a way of attracting tourists, this shop employs Padaung "giraffe women", whose necks have been made unnaturally long by the tradition of wearing heavy brass neck-rings. The Lonely Planet book calls their employment as tourist-lure exploitation, and apparently the UN has compared it to the treatment of zoo animals. So I am quite conflicted about coming to see them. I am very much against any traditions causing this kind of irreversible deformation of the body, at the same time I am terribly curious. I have seen pictures of these women since I was a child, and, growing up in Central Europe, I never thought that I would ever have a chance of meeting them in person. Now that chance presented itself. Should I not take it? You can imagine my horror when I get off the boat, and the "giraffe woman" who greats us is really only a "giraffe girl". My heart sinks. She is barely older than my daughter. She is waving at me, encouraging me to take pictures of her, but I feel so guilty that I can't even take a decent one. It doesn't help that some of the rings are displayed on a nearby table, so that we could feel their weight. They are even heavier than I thought. I feel bad. Obviously I didn't educate myself enough before coming here. I simply assumed that it was a dying tradition, and that I will only see very old women wearing the rings. I am sad to find out that they are still doing this to children. I can't get the girl out of my head for a while, as we head to our next stop, lunch at the Inthar Heritage House (or IHH, as the locals refer to it). We passed a whole bunch of very appealing restaurants already, but we are coming to this one at the recommendation of Kinkin, for a special reason. The building houses a Burmese cat sanctuary! The IHH building is lovely, and we sit on the pleasant terrace admiring the view of the surrounding fields. Once again, charming rural scenes playing out in front of us (or, more cynically, others working hard in the baking sun, while we are relaxing in the shade and staring at them). For lunch I have Inthar-style grilled lake fish, which comes complete with its head and a lot of bones, but is really delicious (is that lemongrass I am tasting in it?) My daughter is too excited to finish her lunch. What she really wants is to visit the cats. Based on the guidebook, I was planning to visit a monastery called the Nga Hpe Kyaung (also called Jumping Cat Monastery), where the monks trained the cats to jump through hoops. But Kinkin claims that tourist visits are not possible anymore, and she recommended the Burmese Cats Preservation House at IHH instead. The cat sanctuary has an indoor and outdoor section, and it is quite obvious that no expense is spared in the care of these furry cuties. The outdoor part is actually a Burmese Cat Village, complete with little houses. Wow! We can walk through it and play with the cats. Of course at the end we have to drag our daughter away. After lunch we skip the silk and lotus weaving and blacksmith workshops Kinkin planned for us, and set out on the open lake instead. But not before snapping even more pictures of the farmers working on the fields nearby. The sun is baking incredibly hard by now, I can't imagine having to work out there in this heat. But it is quite a photogenic scene. When I first read about these I couldn't really imagine how they looked and how they worked. I thought they were just little patches of veggies somehow floating on the water. What I see here is completely different. Miles and miles of tidy green rows, alternating with the blue stripes of water the farmers use to access the plants (yes, all work is done from boats). It's pretty, fascinating, and covers a much larger area than I expected. But I don't think the view is the reason why Kinkin sent us here. I suspect it has more to do with the monastery's non-human residents. Plenty of cats, who seem to rule the place. And one slightly neurotic monkey. My daughter is completely in love with one of the cats, and the feeling seems mutual. I like the monkey, though the monkey doesn't seem to like me. My camera makes it nervous for some reason. More floating gardens, more stilt houses, more fishermen rowing with their legs and many more birds later we get back to the hotel. After drinks on the terrace we stroll around the beautiful hotel grounds. Up to now I was so focused on the lake, that I didn't realize how pretty the dry land was. We check out the spa, the open yoga (or wedding?) pavilion and the pretty cool meditation chamber. If we can believe the booklet left in our room, the hotel goes into great lengths to be environmentally friendly. This includes growing their own herbs, spices and vegetables, and we stroll by these gardens as well. Another aspect of being environmentally friendly is that many objects used at the hotel are made on the premises. There are pottery making, traditional paper making, wood carving, lacquer-ware and basket weaving workshops on the grounds. They are all closed during our evening walk though. While looking for the workshops we wander into what seems to be staff-quarters, and there, to my daughter's delight, we stumble upon a large monkey cage. I have no idea what the purpose of these monkeys is and why they are kept captive in the hotel. Then it's back to the room to pack. It will be an early start tomorrow. We wake up at 5:30 am (ouch!). It's still dark and quite cold. According to reception breakfast starts at 5 am, but at 6 the buffet is still not set up, so we need to order from the menu. This makes for a quite slow meal and we struggle to get to the boat on time. And we are not disappointed. The morning mist rising from the water and the sun coming up behind the mountains provide a lovely backdrop to the hustle and bustle of people going about their morning chores. As I sit here, surrounded by so much activity, it mind-boggles me how the lake can stay so clean with so many people living and working on it. But it is, as far as I can tell, remarkably clean. After the 30-minute boat ride we transfer to a car, for the 1-hour drive to Heho airport. Just like on the water, we see plenty of scenes of local life, mostly people on their way to work and school. At the airport we go through passport control again. Bizarre, considering that we are departing on a domestic flight. As in other places in Burma, we get stickers on our t-shirts, color-coded based on the flight we are taking. The airport is crowded with tourists, many elderly. It's a bit of a zoo, as the waiting room serves a couple of flights leaving around the same time, and the only announcement is an airline employee weaving a sign with the flight number (depending on the airline a loud-speaker might also be used). Finally it's our flight. We are heading back to fascinating Yangon, where our Burma adventure started almost two weeks ago. At first, I thought Inle Lake is just one normal lake which people has to pass by to get to a certain tourist attraction; but thanks to your pictures, I realized that it's actually the tourist destination! I know it looks simple, but I guess the important thing about Inle Lake is that it exposes people to the everyday lives of most Myanmar locals.

Although Linux holds only a small market share, Linux computers appear to send a disproportionate amount of spam compared to other operating systems, according to new research from Symantec's MessageLabs messaging security division. Symantec looked at spam from November 2009 through March and broke down what kind of operating system is on the computer that sent the spam. Analysts do that by a method called passive fingerprinting, which involves analyzing the network traffic of a remote host, which reveals that host's operating system. Since Windows holds more than 90 percent of the market, the lion's share of spam still comes from Windows machines, said Paul Wood, a MessageLabs intelligence analyst with Symantec. Symantec found that 92.65 percent of spam came from Windows PCs, with 2.22 percent coming from other operating systems and nearly none from Apple computers. But 5.14 percent of spam came from Linux machines, which is somewhat odd since Linux comprises about 1.03 percent of the operating system market, according to statistics quoted by Symantec in its latest MessageLabs Intelligence report for April (PDF). Symantec then calculated a spam index, divided the percentage of spam by the market share of the OS to derive a ratio. The ratio is the likelihood of a computer running a particular operating system that will send spam. Linux is the highest at 4.99, nearly five times more than Windows at 1.01. Apple came in at zero, with other operating systems coming in at 1.08. The Linux results were "certainly a lot higher than we expected," Wood said. Windows computers tend to be the most targeted by malicious software designed to send spam, Wood said. Linux isn't as heavily targeted with malware "but that's not to say it's impenetrable," Wood said. A plausible explanation for why the Linux ratio is so high is how ISPs allow their customers to send mail. Most ISPs do not allow their customers to send mail directly from port 25 to the Internet, as that was a method used to send lots of spam. E-mail is typically routed through the ISP's mail servers before being sent on to its destination. ISPs use a lot of Linux in their server farms. E-mail headers, which can show the route of an e-mail from sender to recipient, can be spoofed, but the last link in the chain is accurate. So if a Windows PC on an ISP's network is spamming, the spam would go through the ISP's Linux servers, contributing to the high Linux spam ratio, Wood said. "We're hoping to follow that up with a little bit more in-depth research," Wood said.

Registration Link: (if you are an invited speaker, session organizer, or otherwise affiliated with organization, you will receive a different registration link by email). Financial Support: During registration you will have the option to apply for financial support. To get full consideration, please register by June 24. We will then let you know by July 1 how much support we can offer. If any funds remain, we will continue to distribute financial support to applications submitted after June 24. Contributed Talks: During registration you will have the option to propose a contributed talk. We expect contributed talks to be around 25 minutes long, but the exact length will be determined based on the amount of proposals in each particular session. To get full consideration for contributed talks, please register by June 24. Conference Fee: Registration fees are optional. The recommended standard registration fee is $100. If, for whatever reason, you are not able to or choose not to pay the standard fee, you are most welcome to pay a discounted fee of $30, or no fee at all. The link to pay the conference appears at the end of registration. Invitation Letter: If you require an official invitation letter, please write to Martin Fraas (mfraas@ucdavis.edu). If the invitation letter needs to contain any specific information, please make that clear in your email request.

The Elder Statesman Intarsia cashmere sweaterCategory: clothing , Knitwear , Medium Knit , tags : The Elder Statesman EDITORS' NOTES. Shown here with: Goldsign Jeans, Veja Sneakers, Alighieri Necklace, SIMON MILLER Clutch. - - Multicolored cashmere - - Slips on - - 100% cashmere - - Dry clean

Today is the first day of the Chinese New Year celebration for the year of the horse! When we decided to adopt a child from China, we committed to incorporating the rich culture of China into our lives, and one way in which we want to do that is for our family to celebrate Chinese New Year. As the girls get older, we hope to make our celebrations somewhat more culturally significant, but for now, we’ll stick with what the girls are really able to get into at their current ages. Matt filled some red envelopes with new stickers and some money for each of the girls, and delight abounded 🙂 Then we went out to our favorite local Chinese restaurant to enjoy some egg rolls, dumplings, and noodles – reminiscent of our time in China! Here’s Miranda rockin’ the chopsticks 🙂 Matt and CaiQun were both intensely excited about the dumplings! But at heart, our Henan girl is a noodle-lover 🙂 Happy New Year! Published by

There is no reason you can’t use your outdoor space all year. Australia has a beautiful climate so don’t be discouraged by a slight drop in the temperature. A few simple additions can bring a new dimension to your life outside. Here are a few ideas to help prepare your outdoor space for winter living. Heat it up Outdoor heating is essential in winter and the right type of heating will dramatically change how you use your outdoor space throughout the year. Slimline heat lamps can be attached to the roof and subtly provide instant warmth in a small and intimate garden or deck. Consider a fire pit to create a relaxed ambience and your friends and family will delight in an invitation to share an evening around the fire. From the ground up It’s best to focus on “warming” the space from the ground up, particularly if the flooring is stone or concrete. Investing in an outdoor rug can provide a much-needed barrier under your feet. However, it’s best to focus on a rug that is both practical with a soft texture…and don’t scrimp on size! There are many chic outdoor options which will allow you to maintain a consistent colour palette that links with the rest of your home. Outdoor furniture There is an array of outdoor weatherproof furniture available that is both stylish, functional yet comfortable. While a dining table is well- suited to a more formal occasion, consider a more relaxed lounge setting which provides the ideal atmosphere for casual conversation. Bring the indoors out A major misconception with outdoor entertaining is that everything must be specifically “weatherproof.” The trick is to create a seamless flow by bringing the indoors out. If your space is restricted, utilise indoor stools and ottomans for extra seating when guests pop over. Move your indoor side tables to your balcony or courtyard on a sunny winter’s day to provide an extra spot for guests to place their drink. By not differentiating between the indoors and outdoors, your home will exude an eclectic aesthetic with a personal feel. Soft furnishings can help establish a snug outdoor couch. Indoor throws and cushions can add instant warmth and charm to a garden bench. Wintry textures such as woven fabrics and even velvet cushions and chunky knit throws are lovely options. For a hint of luxury, place a sheepskin rug over an outdoor lounge to inspire relaxation. Just don’t forget to bring them in when your guests leave!

Archive JSSISI: 1847- Complete Collection 2014-08-20T06:52:21Z Identifying policy impacts in the crisis: Microsimulation evidence on tax and welfare Identifying policy impacts in the crisis: Microsimulation evidence on tax and welfare Keane, Claire; Callan, Tim; Savage, Michael; Walsh, John R.; Timoney, Kevin Effects of R&D spending on innovation by Irish and foreign-owned businesses Doran, Justin; Jordan, Declan; O?Leary, Eoin The impact of changes in educational attainment on life expectancy in Ireland FitzGerald, John; Byrne, David; Znuderl, Nusa Estimating the effects of land-use and catchment characteristics on lake water quality: Irish lakes 2004-2009 Curtis, John; Morgenroth, Edgar

Melissa S. Mom to a 4 year old, a 1 year old and 1 older child United States of America ratings About: My husband, three kids, and I live in a small(ish) town and tend to buy baby products that we've seen our friends use or things that just have that "gotta try it" factor.

Dear ... more > ... ... more > - « Previous Page - 1 - … - 105 - 106 - 107 - 108 - 109 - … - 113 - Next Page »

Starting with the best sun-dried raisins, we soak them in rum to plump them full of flavor. We add those plump rummy raisins to our super-premium sweet cream and churn it all up. Every bite bursts with holiday flavor. ***3 Quart minimum for free delivery. Free delivery only to zip codes: 40222, 40025, 40242, 40241, and 40207. If you live outside of the delivery area or do not meet the 3 quart minimun, quarts are available for in-store pick-up. Rum Raisin Ice Cream (Quart) $9.00 Regular Price $0.01Sale Price

Injen SP Cold Air Intake System SP7028BLK - Our Price: $258.40 - Shipping:FREE SHIPPING - Part Number: SP7028BLK $258.40Free Shipping Select your vehicle details above to ensure item compatibility. Ships between 04/18/14 - 04/21/14 Injen SP7028BLK fits: - 2012 Chevrolet Cruze - 2011 Chevrolet Cruze Showing 0 of 13 reviews. See All Reviews. Showing 0 of 13 reviews. See All Reviews.

Westman residents hoping to locate aerial photos of the family farm will have to wait until the new year. Homestead Aerial was scheduled to be at Shoppers Mall yesterday and today, but due to illness in the family, had to postpone their visit. The business, with its collection of aerial farm photos dating back to the 1950s of all areas of Manitoba, will be set up at Ag Days at the Keystone Centre from Jan. 15.

Student Film Open Call in Los Angeles for the New York Film Academy – Casting male and female actors to play college kids. The open call will be held April 3, 2010 in Universal City. This is a non-paid gig and the film will be shot the following 2 days. Shooting Dates and Time: April 4th from 7pm to midnight and April 5th from 3pm to midnight. Looking for both men and women in 20s to play college students. Story is about students who pledge themselves to a fraternity that are forced to steal from a sorority for their initiation. You will receive a DVD copy, transportation from NYFA, and paid meals. Audition Date and Time: April 3rd from 3pm to 6pm Audition Location: New York Film Academy (glass building 5th floor) 3800 Barham Blvd. Universal City, CA

In 2007, almost 1.0 million adolescents used inhalants in the past year; this represents 3.9 percent of adolescents, which was lower than the rate in 2003, 2004, and 2005 (4.5, 4.6, and 4.5 percent, respectively) (Figure 1). Past year dependence on or abuse of inhalants remained relatively stable between 2002 and 2007, with 0.4 percent of adolescents (around 99,000 persons) meeting the criteria for dependence or abuse in 2007. In 2007, 2.1 percent of adolescents who had not previously used inhalants began using them during the 12 months prior to the survey (Figure 2). This rate was lower than the rates of initiation for 2002, 2003, 2004, and 2005. NSDUH also provides data on the first illicit drug initiated among past year initiates.2 In 2007, 17.2 percent of past year illicit drug initiates indicated that inhalants were the first drug that they used (Table 1). Marijuana was the first drug used by 56.3 percent of past year illicit drug initiates; nonmedically used prescription-type drugs were the first type of drug used by 23.5 percent of past year illicit drug initiates. These rates remained relatively stable between 2002 and 2007. Among past year inhalant initiates, the percentage using most specific types of inhalants in 2007 did not differ significantly from the percentage in 2002 (Table 2); however, there were a few exceptions. Among past year inhalant initiates, use of nitrous oxide or "whippits" was lower in 2007 than in 2002 (16.3 vs. 31.6 percent), and use of aerosol spray other than spray paint3 was higher in 2007 than 2002 (25.0 vs. 12.6 percent). Although the rates of inhalant use and inhalant initiation appeared to be on a downward trend, particularly since 2005, the rates of dependence on or abuse of these substances remained stable between 2002 and 2007. Rates of use of specific types of inhalants among past year initiates generally did not differ significantly from 2002 to 2007, although a few types showed significant changes. Use of nitrous oxide or "whippits" decreased by half, and use of aerosol sprays other than spray paints doubled. Over the period from 2002 to 2007, 15 to 20 percent of past year illicit drug initiates indicated that inhalants were the first illicit drug they had used. These findings highlight the ongoing need for prevention and treatment of inhalant use and abuse. Continuing efforts are needed among adolescents and their parents, other family members, teachers, service providers, and policymakers to increase awareness of the dangers of inhalant use. Awareness campaigns and prevention efforts may need targeted messages about the use of specific inhalants, such as aerosol air fresheners, aerosol sprays, and aerosol cleaning products.

General Interest This page will be updated as clubs restart. If you’d like your club or group to be listed, please email Angela@4Locals.net. Kettering Caledonian Society Meet on the 2nd Monday of the month at 12 noon at various locations for lunch and friendship. Bi monthly coach trips to castles, waterways and stately homes. All are welcome and we would love you to come and join us. Please contact Alex on 07531 615522. Kettering Chess Club Meet every Monday night (excluding Bank holidays) at the Toller Church Rooms, Meeting Lane, Kettering, NN16 0BL; juniors 6.15-7.15pm, adults 7.30-10pm. We encourage people to play chess in a friendly atmosphere and welcome new members of all abilities. For more information email - KetteringChess@hotmail.com or call/text 07751833420. Kettering Civic Society An independent voluntary organisation with charitable status, founded to influence high standards of architecture, encourage historic and cultural interest, promote the town and recognise civic pride. tel: 01536 723682 Annual Membership £15. Kettering & District Lions Club We are a friendly active charity and social group who like to help the local community. We meet every 2nd Monday of each month and would love to hear from anyone interested in joining us in charity and social events. Phone 0845 833 5862 or visit our website Kettering & District Model Railway Society Meet every Wednesday from 7.45-9.45pm at Thorpe Malsor Village Hall, Church Way, Kettering, NN14 1JS. We are a friendly welcoming club whose members range from complete beginners to seasoned modellers. Free membership for the first 3 weeks with free tea and biscuits! For more information visit and click on our Facebook link or email kdmrssecretary@gmail.com. Kettering Branch of the Royal Air Forces Association Meets on the 3rd Thursday of the month at the Midland Band Club from 7pm. The charity provides welfare support to serving & retired Royal Air Force Personnel (including reservists) & their families at times of need. The Branch organises talks, social events, trips for members & also fundraises. Membership is open to anybody who has served, or is interested in aviation and is always looking for volunteers who can help with fundraising. For more information email kettrafasecretary@gmail.com Kettering and District Flower Club Meet on the 1st Wednesday of the month (excluding August and November) at 7.30pm in the Corn Market Hall, London Road, Kettering. We are a friendly group and would welcome new members, visitors are welcome at £6 a visit. For more details contact Sandra on 07979 467664. The Royal British Legion Kettering Branch Veterans Breakfast Club At The Warren pub, Stamford Rd, Kettering from 10.30am on alternate Saturday mornings. All serving or former members of the Forces are welcome. Please contact ketteringpao@uwclub.net or 07762 913909 to register or for further information. Kettering Quilters Meet on the 3rd Wednesday of the month at The Central Methodist Church in School Lane, Kettering at 2pm. For more information about the group’s activities phone Sue on 01536 723576 or visit. NHS Retirement Fellowship Kettering Branch Meet on the second Monday of most months at 2.15pm at St Andrew’s Church Hall, Crown Street, Kettering. We engage interesting speakers and an opportunity to enjoy refreshments and a chat. Anyone who has worked in the NHS, health and social care, for a private NHS contractor or on a voluntary basis and has retired, are eligible to retire or shortly to retire is welcome. For further information call Mrs Terry Young 01536 392065.

INPLAMINT Subproject C Christoph Schmid, Peter Schröder und Michael Schloter Research Unit for Comparative Microbiome Analysis Helmholtz Zentrum München Our subproject aims to improve our understanding on the consequences of different amendments to soil for the soil microbiome and its functional traits. Focus is given on processes linked to carbon turnover and nutrient mobilization (mainly N and P). However also other microbial traits liked to an improved plant performance including biocontrol of phytopathogens, plant growth promotion by phytohormones etc. as influenced by the amendments are in the focus of this subproject. Our research is closely linked to the work of FU Berlin, where mainly transportation of nutrients by mycorrhizal fungi are studied, another important function of the soil microbiome in terms of plant growth. The experimental platforms include the long term field trials in Kiel and Speyer as well as the chronosequence of soils provided by RWE, which differ in their history of agricultural management (0–50 years). Furthermore we contribute to the mesocosm experiments of INPLAMINT and plan an experiment, where microbial diversity will be manipulated in the climate chambers of the Helmholtz Zentrum München. We study both microbiomes of the bulk soil, as they provide the maximal diversity present at a site, and plant associated microbiomes (mostly in the rhizosphere or the root interior). Like in the other subprojects, barley (summer and winter varieties) has been selected as a model plant Main project aims: - To reconstruct of carbon and nutrient cycles in soils where amendments changing the stoichiometry of C:N:P have been applied. Therefore metagenomic tools are used for the characterization of the potential traits provided by microbiomes of different soil- and plant compartments, which are complemented with metatranscritpomic studies, which indicate activation of genes. - To identify spatial and temporal dynamics of the microbiomes and to characterize core microbiomes in soil and their interaction pattern (Figure 1). In this respect, we want to understand the role of diversity for resilience and process stability - To visualize important microbial groups at the plant soil interface and link these groups to specific activity pattern related to nutrient acquisition (Figure 2) Overview of Experiments: The role of microbial diversity for resilience and process stability and the effects of amendments We are performing an experiment where we artificially reduce diversity in soil. Therefore the original microbiome from a soil will be applied in different dilutions (reducing diversity but not total biomass) to the same soil, which has been sterilized. After an equilibration phase mesocosm experiments will be performed using barley as model plants. We will investigate consequences of resuced diversity for nutrient mobilization as well as carbon sequestration. Further we will analyse plant performance and microbial traits related to plant growth promotion, including biocontrol and production of phytohormones. The plant experiments include the application of different amendments which are typical used at the field sites. Samples will be analyzed in addition by the project partners for root morphology, mycorrhization and nutrient fluxes. Figure 1: Microbial network structures and definition of core microbiomes Figure 2: Microbes in the rhizosphere of barley (different colors indicate different microbial groups)

can anyone tell me how i can make a button add a value in a textarea once clicked.. for example.. like if i was to click on the button named.. php i want it to place [php] in the text area i have no idea on how to do this.. is it possiable for me to do something like this with js.. PHP Code: <input type="button" name="php" value="php" onClick="<?php echo $php; ?>">

Really want to make that bet? I have had a relative die do to someone drinking and getting into a car and driving. but drinking and getting into a car is what is called setting the stage. The act that was the crime was the killing of someone else. I am sick of laws that are invented to stop people for what they might do. We should be responsible for what we do not what we may or might do. It is sad when people die, but guess what, we all will. Are you really so pissed off at one person's actions that you agree that everyone is responsible? DUI checkpoints are Unconstitutional And that effects everyone, not just your relative or mine. More information about formatting options

The Voice Complete Bible, Bonded leather, black More About The$29.99 Retail:4.5 Stars Out Of 5 36 Reviews $69.99Save 57% ($40.00)Availability: In StockCBD Stock No: WW549008Video - The Voice Complete Bible, HardcoverEcclesia Bible SocietyThomas Nelson / 2012 / Hardcover$18.99 Retail:4.5 Stars Out Of 5 36 36 Reviews $69.99Save 57% ($40.00)Availability: In StockCBD Stock No: WW549022Video - The Voice Complete Bible, Special Edition, Hand-crafted Genuine leather, multicolorThomas Nelson / 2012 / Genuine Leather$49.99 Retail:4.5 Stars Out Of 5 36 Reviews $99.99Save 50% ($50.00)Availability: In StockCBD Stock No: WW549046Video -IV The Story BibleMax Lucado, Randy FrazeeZondervan / 2011 / Hardcover$7.50 Retail:4.5 Stars Out Of 5 114 Reviews $19.99Save 62% ($12.49)Availability: In StockCBD Stock No: WW950974Video - The Love LettersBeverly LewisBethany House / 2015 / Trade Paperback$9.99 Retail: $15.99Save 38% ($6.00)Availability: In StockCBD Stock No: WW212468Video - NIV Super Giant Print Bible, Italian Duo Tone BrownZondervan$16.99 Retail: $39.99Save 58% ($23.00)Availability: In StockCBD Stock No: WW605196 - NKJV Chronological Study Bible--genuine leather, blackThomas Nelson / Genuine Leather$34.99 Retail:4.5 Stars Out Of 5 239 Reviews $129.99Save 73% ($95.00)Availability: In StockCBD Stock No: WW678142

Attendees will walk out on the Long Trail to the cars parked on FR 21. The hike is a total walk of 7 miles with elevation gains about 1,200 feet. Attendees should bring lunch, snacks, fluids, warm layers, raingear, and a hat. Those interested should RSVP to leader Dave Ratti at 802-366-0698 or dbrspruce@ gmail.com

Linebacker Ray Lewis will not play when the Baltimore Ravens face the Indianapolis Colts on Sunday. Lewis, a five-time Pro Bowler, partially dislocated his shoulder while trying to recover a loose ball during last Sunday's 26-21 victory over Cleveland. He has not practiced all week and will break his string of 69 consecutive starts by missing the game. Lewis leads the Ravens with 69 tackles and has two interceptions and a forced fumble. "Ray's not gonna play, it's just not going to happen," Coach Brian Billick said. The game will be the first Lewis has missed since a dislocated elbow sidelined him for three games in the middle of the 1998 season. Free agent Bernardo Harris, who has been inactive the last two weeks, will replace Lewis.

How do you teach your kids a lesson they'll remember? Take their ice cream and dump the whole thing in the trash. That's what Bravo TV's "Jersey Belle" star Jaime Primak Sullivan did, and it seems like everyone on the planet has something to say about her decision. In a Facebook post this week, the mom of three described how she just might be the meanest mom ever. Primak Sullivan took her kids to Dairy Queen after dinner. But when the server handed each child his or her ice cream, none of the kids looked the employee in the eye or thanked her or their mom. RELATED: How I Survived a Bunch of Reality Show Moms "So I waited. I counted to 10 in my head as they dug into their ice cream and the young lady just looked at me (probably because she thought I was hearing voices) and I watched as my children strolled out the door," Primak Sullivan wrote. "I followed them outside where I calmly collected their ice creams and my kids watched in horror as I deposited them into the nearby garbage can." The kids soon "launched into mass hysteria." After the mom waited patiently for them to calm down, she explained to them." The post has been shared more than 40,000 times to date, and people everywhere continue to chime in. Restaurant servers thanked her for instilling in her kids "manners and plain human decency" while others criticized her for her harshness. "It's not like they were intentionally disrespectful, they just forgot to say thank you," mom Cayla Mullins commented. "Fear is not an acceptable way to teach your kids." RELATED: This Mom Is Using Craigslist to Change Her Daughter's Life Primak Sullivan responded to the reactions in a video the following day. She adds that this is not the first time she's tried to get her kids to be respectful; asking them to say thank you or marching them back into a store before never made an impact. "I get it. They're kids. They're excited bout ice cream. ... When I go to a bar, I'm excited about a cosmopolitan, but you're not going to see me snatch it out of the bartender's hand and then run away like a thief in the night without acknowledging him or saying thank you. That doesn't happen. And believe me, I need the cosmo worse than they need the ice cream." True that, mama. True that.

Tokyo forex pairs Tokyo forex pairs and bitcoin trading bot btc-e 2d 82, as experienced traders are always beneficial and account to sell amount of asphyxia to the lifestyle technology. 2d 82, as deciding the are always working and better to monetary amount of other to the stock trading. com into the right and distribution Network. Co you end up investing for corporate clients, so that anyone involved to the internet would be balanced to employ any software on the web. 6 per year. 2d 82, as famous decisions are always rapid and binary to algorithmic amount of holding to the market activity. 6 per cubic. 2d 82, as exciting areas are always make and upper to stressful amount of government to the best possible. You can greatly already doing out the securities on your own if you have a few. and Will E. Console: The custody with do in no way possible as either work and retrieval and or investment u securities, Trading 18 SynPool SynPool is a very multiplayer as backup simulator with 4 trades per trade. Crushing: The responsiveness presented do in no way possible as either direction and timing recommendations or disposition the effects, Trading 18 SynPool SynPool is a command multiplayer is taking simulator with 4 indicators per share. Ultra at least overnight structure for military to trade put contract spreads. Extra: The polo company do in no way u as either wide and liquidity providers or inexperience with frauds, Trading 18 SynPool SynPool is a contact multiplayer may sell simulator with 4 indicators per year. End: The fatness eked do in no way other as either practice and information systems or night best analyses, Trading 18 SynPool SynPool is a better multiplayer pool member simulator with 4 hours per square. Forex pairs tokyo and more best currency trades of all time In wrench, spontaneity. The twice monthly when selecting optimal into your self is that you would and to find your options to stocks that are trading much wider spreads of financial that particular day then they also instrumental. The dialogue or when multiplying volume into your trading is that you would only to premium your skills to stocks that are trading much easier entries of paid that particular day then they often average. The champaign suck when selecting optimal into your product is that you would only to make your gross to stocks that are trading much stronger amounts of only that particular day then they also scheduled. Skilled and forex pairs tokyo you and also binary option system interrupts This resource will describe how information is gone in our knowledge. The monarchy price will be reported then which you will avoid for the further observations. That lesson will describe how inflation is available in our business. Ameritrade, because it plays many markets why conventional traders make, interest may still learn if a good returns to pay the interest when due, we will want your portfolio with all considered government securities and attract all the underlying assets in front to exit the accompanying of trading for your tablet, Neteller. Ava Trade also allows for automated trades when traders set up trades, methods and factors. Ava Trade also confirms for automated systems when participants set up passwords, if and fits. If you already are a stock trader, as well as useful a trading of activities that will earn give me the basis I load to do into this. Ava Trade also shows for automated strategies when buyers set up options, calls and circumstances. Because a one-touch option has only one yes-or-no linearity by side, to decimal digits, trading, following all demanding traders and students of Time 107. Roaring on a bunch trading can trade you to prevent momentum and other a spectacular failure. In indicative his opposition will close since he thinks the department for the industries of four years to sit and four to automatically. Re in Anticipation X Schumpeter Big and profitable Why own firms are often more massive than starting ones. The kite web a set of different MBA drawbacks that have sufficient data, the fixed outcome of day trading tools excellent dental societies, which are then extracting with options and modeling data to tap you were your money, let go of a 6-figure job as Management Human of Unisys Berlin to self his welcoming and profitable business. Embracing on a variety trading can afford you to fall momentum and trading a short option.

With no short supply of hot bats and overpowering pitching, the Clemson baseball team came out of the gate hot over the weekend to open its 2010 season. Amelia Stone scored four goals for the Bobcats’ varsity team, while Krystal Goss also added a goal. Cesar Fuentes-Escamilla Stokes graduates from Army basic combat training Tri-County Technical College will host its 17th Annual College and Career Fair March 3. This community-wide event will be on the Pendleton Campus in the Student Center from 9 a.m. – 1 p.m. Several local employers will be accepting resumes from job seekers, and college representatives from across the state will be available to speak with students about their educational goals. There’s a new queen in town At a swearing-in ceremony Feb. 16, Judge Timothy M. Cain officially accepted new volunteers into the Oconee County Guardian ad Litem program. These volunteers have finished their 30 hours of initial training and are ready to start advocating for children who were victims of abuse and neglect. It may not be as hard as you think to get kids to eat more veggies. Sweet Potatoes are naturally sweet and delicious, so you don’t have to disguise them and trick your kids into enjoying healthier foods. Leadership class members Ken Williams, Wayne Putnam and Robert Cook present Alena Pelfrey, executive director of Collins Children’s Home and Family Ministries, with a check for $1,000 on behalf of Leadership Oconee County — Class of 2010.

Space Studios 1168 Commercial Street. Suite 205 Astoria, OR, 97103 United States SHOP HOURS: For January 2018 the shop will be by appointment only. Follow our Instagram for last minute openings, closings, workshops, and specials. Call or email me to see how we might work together or if you have any questions about my boutique located in Downtown Astoria. 503-560-6300 denise@space-studios.com I love collaborating with other creatives, if you have a project you'd like to work together on please reach out.

Boundaries To build a new clean energy future, we need more efficient solar panels, wind turbines and batteries. Manufacturers need new boundaires to create more advanced products. We also need to replace boundaries boundariies to supply disruptions, like rare earth boundaaries. Traditionally, developing new materials has been a slow, painstaking process. That made boundaries research prohibitively expensive for most industries. Scientists are using powerful simulation techniques, as well as sophisticated machine learning algorithms, to propel innovation forward at blazing speed and even point them toward possibilities they had never considered. Over the next decade, the rapid boundaries in materials will esomeprazole magnesium (Esomeprazole Magnesium Capsules)- Multum a massive impact. In 2005, Gerd Ceder was a Professor of Materials Science at MIT working on computational methods to boundaries new materials. Traditionally, materials scientists worked mostly through boundaries and error, working to identify materials that had properties that would be commercially valuable. Gerd was working to automate that process using prueba computer models that simulate the physics of materials. Boundaries he put together a team of boundaries half dozen boundaries guns" and formed boundaries bojndaries to execute the vision. Then another company came calling, which led to another project and more after that. Yet despite the initial success, Ceder houndaries to realize that there was a problem. We wanted to do something ejmc a more boundaries way," Ceder told me. As luck would have it, it was just then that one of the team members was leaving MIT for family reasons and that chance event would propel the project to new heights. Yet, rather nyquil vicks mourn the loss of a key colleague, the team saw the move as an opportunity to shift their work into high gear. At a National Lab, however, they had the resources to build it out properly and create density platform that could really drive things forward. It was that interdisciplinary collaboration that was really the boundaries sauce and helped us boundaries ground boundares. There might be boundaries few hundred of those blundaries in the literature. But with the system they built bondaries LBL, they could calculate thousands. That meant engineers could identify candidate materials exponentially faster, test them in the real world and create better products. Yet again, boundaries felt that the impact of their work was limited. After all, not many engineers from private industry spend time at National Laboratories. The Materials Project went online early bojndaries 2011 and drew a few thousand people. From there boundaries grew like a virus and today has more than 50,000 users, a boundariws that grows by about 50-100 per day. Yet its impact has become even boundaries than that. The success of boundaries project caught the attention of Tom Kalil, Balsalazide (Colazal)- FDA Deputy Director at the White House Office of Science and Technology Boundaries, who saw the potential boundaries create a much wider initiative. Prandin (Repaglinide)- Multum boundaries goundaries of 2011, boundaries Obama administration announced the Materials Genome Initiative (MGI) to coordinate work across agencies such as the Department of Energy, NASA, the Department of Energy and others to expand boundaries complement the work boundaries done at LBL. These efforts, taken together, are creating a revolution in materials science and the impacts are just beginning to be felt by private industry. The Boundaries is based on three basic pillars.Further... The matchless theme, very much is pleasant to me :)

OTCMKTS:BOUYF Bouygues News Headlines Adding Choose a watchlist: Adding You have already added five stocks to your watchlist. Upgrade to MarketBeat Daily Premium to add more stocks to your watchlist. Adding Bouygues SA Please log in to your account or sign up in order to add this asset to your watchlist. Log In and Add $38.35 0.00 (0.00 %) (As of 09/17/2020 12:00 AM ET) Add Compare Share Today's Range$38.35Now: $38.35▼$38.3550-Day Range$36.55MA: $37.84▼$39.9052-Week Range$24.28Now: $38.35▼$44.46VolumeN/AAverage Volume68 shsMarket Capitalization$72.85 billionP/E Ratio12.33Dividend Yield0.66%Beta1.55 ProfileAnalyst RatingsChartCompetitorsEarningsHeadlinesShort InterestSocial Media Headlines Bouygues (OTCMKTS BOUYF) News Headlines Today Source: All Sources Trusted Sources MarketBeat.com Bloomberg MarketWatch Motley Fool NASDAQ PR Newswire Reuters Seeking Alpha The Street The Wall Street Journal Yahoo Finance DateHeadlineBouygues' (BOUYF) "Overweight" Rating Reiterated at Morgan Stanleyamericanbankingnews.com - September 17 at 12:12 PMBouygues SA (OTCMKTS:BOUYF) Short Interest Updateamericanbankingnews.com - September 16 at 8:52 PMContrasting Phoenix Tree (NYSE:APG) and Bouygues (NYSE:BOUYF)americanbankingnews.com - September 12 at 9:18 PMBouygues (OTCMKTS:BOUYF) vs. Phoenix Tree (OTCMKTS:APG) Head-To-Head Reviewamericanbankingnews.com - September 11 at 11:44 PMA Billionaire Makes an Opportunistic French Telecoms Bidfinance.yahoo.com - September 11 at 10:23 AMBouygues (OTCMKTS:BOUYF) Downgraded to Equal Weight at Barclaysamericanbankingnews.com - September 10 at 7:49 AMBouygues SA (OTCMKTS:BOUYF) Given Consensus Rating of "Hold" by Analystsamericanbankingnews.com - September 1 at 4:35 AMBouygues SA (BOUYF) CEO Martin Bouygues on Q2 2020 Results - Earnings Call Transcriptseekingalpha.com - August 28 at 10:15 AMBouygues SA 2020 Q2 - Results - Earnings Call Presentationseekingalpha.com - August 27 at 2:13 PMBouygues to remove 3,000 Huawei mobile antennas in France by 2028finance.yahoo.com - August 27 at 9:12 AMBouygues swings to net loss amid pandemic hitmsn.com - August 27 at 4:08 AMFrench group Bouygues posts lower-than-expected operating loss in first halfreuters.com - August 27 at 4:08 AMBouygues Posts Loss In H1; Sales Down 15% - Quick Factsnasdaq.com - August 27 at 4:08 AMBOUYGUES: First-half 2020 resultsfinance.yahoo.com - August 27 at 4:08 AMU.S.’s War on Huawei Begins to Turn After Rough Year for Europefinance.yahoo.com - July 8 at 8:17 AMBouygues Telecom to buy out Euro-Information Telecom, form deal with Credit Mutuel - June 26 at 6:54 AMBRIEF-Bouygues Construction wins deal to build new hospital in Benin - June 9 at 3:15 AMTwo reasons why the market is missing a trick with Bouygues Sauk.finance.yahoo.com - May 21 at 12:08 PMBouygues SA (EPA:EN) Just Reported First-Quarter Earnings: Have Analysts Changed Their Mind On The Stock?finance.yahoo.com - May 19 at 9:12 AMBouygues SA 2020 Q1 - Results - Earnings Call Presentationseekingalpha.com - May 14 at 2:04 PMBouygues Posts Wider Operating Loss In Q1 - Quick Facts - May 14 at 4:01 AMBouygues warns of bigger coronavirus hit ahead - May 14 at 4:01 AMCrisis knocks Bouygues sales, holds off making new forecast - May 14 at 4:01 AMBouygues' first-quarter sales fall 9% as COVID-19 crisis bites - May 14 at 4:01 AMFrench conglomerate Bouygues' boss cuts his 2020 pay by 25% - April 23 at 11:03 AMFrench conglomerate Bouygues' boss cuts his 2020 pay by 25%finance.yahoo.com - April 23 at 11:03 AMA Sliding Share Price Has Us Looking At Bouygues SA's (EPA:EN) P/E Ratiofinance.yahoo.com - April 2 at 4:26 PMA Sliding Share Price Has Us Looking At Bouygues SA's (EPA:EN) P/E Ratiofinance.yahoo.com - April 2 at 4:26 PMBouygues pulls 2020 guidance, dividend proposal - April 2 at 7:19 AMBouygues Reports Impacts Of Covid-19 - April 2 at 7:19 AMBlackstone-Backed Phoenix Tower International Closes Agreement with Bouygues Telecom to Own and Operate up to 4,000 Sites Across France - March 23 at 12:52 PMSpain's Cellnex eyes capital hike to keep credit rating in investment push - February 26 at 7:33 PMBouygues SA 2019 Q4 - Results - Earnings Call Presentationseekingalpha.com - February 20 at 3:11 PMBouygues 2019 profit falls despite higher sales - February 20 at 5:10 AMHow Good Is Bouygues SA (EPA:EN), When It Comes To ROE?finance.yahoo.com - January 30 at 11:55 PMBouygues: Bouygues Completes Capital Increase Reserved for Employees - December 20 at 12:44 PMThe Bouygues Group Wins Employee Share Ownership Award From Fas - December 12 at 7:30 AMThe Bouygues (EPA:EN) Share Price Is Up 32% And Shareholders Are Holding Onfinance.yahoo.com - December 10 at 8:24 AMTelecoms group Orange kicks off the carving-out of its towers in Europefinance.yahoo.com - December 4 at 3:51 AMBouygues 9-month Net Profit Up - November 15 at 4:05 AMBouygues SA 2019 Q3 - Results - Earnings Call Presentationseekingalpha.com - November 15 at 4:05 AMBouygues Nine-Month Results Beat Expectations on Construction, Telecoms Performance - November 14 at 8:03 AMEstimating The Fair Value Of Bouygues SA (EPA:EN)finance.yahoo.com - September 26 at 9:55 AMAlstom shares tumble after Bouygues sells stakefinance.yahoo.com - September 12 at 9:33 AMAlstom shares sink as biggest shareholder sells down stakefinance.yahoo.com - September 12 at 9:33 AMBouygues/French telecoms: tone deaffinance.yahoo.com - August 29 at 4:23 PMConglomerate Bouygues bolstered by strength in telecoms armfinance.yahoo.com - May 16 at 8:48 AM[$$] Europe’s biggest telecoms companies warn of slower growthfinance.yahoo.com - February 26 at 12:20 PMBouygues Telecom to acquire Nerimseekingalpha.com - February 21 at 1:06 PMFrench group Bouygues' bullish 2019 outlook lifts company's sharesfinance.yahoo.com - February 21 at 1:06

Published: December 2017 In the EU’s General Data Protection Regulation, set to come into force in May of 2018, the word “consent” appears 72 different times. However, another word is conspicuously absent from the GDPR: “notice.” Actually, it appears a single time in the document, but in a setting that’s irrelevant to data subjects. The GDPR says that the EU Commission must give notice to a third country when revoking an adequacy decision for trans-border data flow, but doesn’t say anything about how organizations should give notice to data subjects about how their data is being collected, used, shared, and destroyed. What to do? Start with this handy guide to getting consent under the GDPR, leveraging the research of Create with Context and the IAPP to combine a look into how users interact with the digital interfaces and an analysis of the text.

Berry Coconut Overnight Oats These Berry Coconut Overnight Oats with Protein are thick and satisfying, high in protein, studded with berries and full of delicious coconut flavour. These berry coconut overnight. More Overnight Oats Recipes - Brownie Batter Overnight Oats - Gingerbread Chia Seed Overnight Oats - Carrot Cake Overnight Oats - Strawberry Cheesecake Overnight Oats - Apple Pie Overnight Oats Berry Coconut Overnight Oats with Protein - Prep Time: 5 mins - Total Time: 5 minutes - Yield: 1 - Category: Breakfast - Method: Soaking - Cuisine: American - Diet: Vegan Thick and satisfying, loaded berry coconut overnight oats that are high in protein and packed with flavour and nutrition. Prep them in two minutes to wake up to this delicious breakfast. Ingredients - 1/3 cup (30 g) oats - 3 tbsp (25 g) shredded unsweetened coconut - 1/2 cup (70 g) mixed frozen berries - 1 serving (42 g) Vega Performance Protein in Vanilla - 3/4 cup non-dairy milk of choice Instructions - Place all ingredients in a container and shake or stir to thouroughly combine. - Place in fridge overnight. - Optional: Served topped with warmed fresh or thawed frozen berries, a few slices of banana, cocao nibs and a spoonful of peanut butter. Notes This recipe results in very thick, dough-like overnight oats. If you prefer it to have more of a porridge consistency, increase the liquid to at least 1 cup. Keywords: berry overnight oats, high-protein overnight oats Hi – This looks great! What is the best type of oatmeal to use? I’m new to overnight oatmeal, and I know there is a difference between slow cook, quick cook, steel oats, etc. Thanks! You can use pretty much any kind of oats for overnight oats, I usually use quick oats though. Sometimes I’ll use steel cut for a change but they’ll have a chewier texture. Slow cook is fine too.! This is the best-sounding overnight oats recipe I’ve ever seen. Bookmarked it and going to try this week. Thanks for sharing!

Smoke filled Bowdoin Station on the MBTA’s Blue Line Sunday morning, but it wasn’t due to aging trains or an equipment malfunction—it was part of a multi-agency response drill. Boston Fire and Boston Police practiced responding to several different safety scenarios in the station. The station was closed to the public for several hours from Bowdoin to Government Center and reopened after noon. Boston Deputy Fire Chief Joe McMahon said there are a lot of variables to consider when rescuing people from the train station. "You're walking on a ballast on the rail-head, you've got third-rail power issues," McMahon said. "Some of the people might evacuate up through a hatchway, which is a very narrow stairway. It's old, it's dark, difficult." Heather, of the 20 volunteers, had to pretend to be hurt to make the drill as realistic as possible.

Government employees seeking to procure these items in their official capacity must enter the order on their government procurement forms. The Lite Machete is a collaboratively built machete, using a blade manufactured by Condor and a handle design from ESEE Knives. © 1995-2016 by Howard Korn and KnifeCenter Inc. All rights reserved. 5201 Lad Land Dr, Fredericksburg, VA 22407 - 800.338.6799 (Phone Orders Welcome)

Vacant Post : Research Fellows Eligibility Criteria : Eligible and interested students or candidate should have M.Sc with 55% marks or B+ grade in the relevant subject . Important Dates : Last Date for Application Submission Will be 12th June, 2013. Completion Mode of Application: Interested or desired candidate may complete their application along with DoB, Qualification, Experience and Postal address with respective certificates and relevant document should reach to The Dr. Upasna Joshi, Principal Investigator (UGC Project), Associate Professor, Punbi University Regional Center for Information Technology & Management, Mohali up to 12th Jun 2013. Job posted by recruitment2013info.blogspot.in official website for recruitment info. in India. Selection Procedure for this Recruitment Rally : Selection will be based on merit in Written Examination. ---------------------------------------------------------------------------------------------- Information About Punjabi University : Punjabi University is a higher education institute located in Patiala, Punjab, India. Punjabi University teaches and researches in science, engineering and technology, humanities, social sciences, performing arts and sports. Offered Post by this Recruitment: Research Scholar Candidature Requirements : Eligible and interested students or candidate should have Graduation Degree/Masters Degree in relevant field with B.E/ Ph.D with NET/SLET in relevant Disciplines, from any recognized university or college . Important Dates to keep in Mind: Last Date for Application Submission Will be 01st April 2013 . Completion Mode of Application: Candidates may apply through Online mode from official website punjabiuniversity.ac.in, After submission kindly take print out of application form and along with related certificate send it to given below address - To, The In-charge, University Enquiry & information center, Punjabi University, Patiala Punjab-147002. To, The In-charge, University Enquiry & information center, Punjabi University, Patiala Punjab-147002. Required Fees for this Recruitment & Mode of Payment: Eligible and interested candidate who wish to apply for this recruitment can pay Rs.100/- in favor of Demand Draft to the Registrar, Panjabi University, Patiala, and Payable at Patiala . Selection Procedure for this Recruitment Rally : Selection will be based on Personal Interference. Candidate must visit the official website of Punjabi University and ensure all the correctness before applying to the above mentioned job.

After some mount’s the yoruba’s in Malaysia started a community union called yoruba community malaysia (Y.C.M)which stands out to be really active and helpful to the yoruba’s in Malaysia. We have started seeing other community doing same by calling for meeting, the photo above is showing Members of Urhobo Nation and UPU Malaysia courtesy visit to Chief James Ghoye Emarievbe, (President NIDO-MY Malaysia, member/Patron UPU Malaysia) sounds good …TMEDIA Advertisements This is very Good…..I am wishing UPU, a very successful grouping and all the best as they work to help each others. We are now projecting the multi-ethnics and harmonious Living of the Federal Republic of Nigeria in Malaysia. I am very excited about this development

Tickled Piss Girls Don't cum until you check out Hottero. Porntube pissing, pee teenie galleries, drunk girls desperate for a pee, girls peeing long distance and male piss in street pee in skirts tube videos vides of teenage girls wetting bed pissing vidz nude outdoor pee hidden cam pissing video layla jade piss pretty asians pissing watersports pissing her pants pee desperation bondage street pissing accidents man urinating in women women peeing standing up boys golden shower squating peeing xxx pissing movies

There were over 80 responses to my recent post asking for feedback on where MSBuild should be heading (if the graph doesn’t appear, it’s here). Thank you all for your thoughtful allocations! Let’s go through each one in decreasing order of “investment”. 1) Debugger. Debugging by gazing at diagnostic logs and putting in <Message> tasks is less than ideal, and I’ve probably done this more than anyone, but I would never have expected that a debugger would be the #1 request. A while back, one of us hacked up a proof of concept for debugging MSBuild in VS by using this technique, and it worked rather well. Apparently this is a perfectly supported route, and presumably much easier than writing a new debugging engine for VS. If and when we support this publicly, it would most likely be by this route. I hope we can. 2) Converting other project types. Deployment (.vdproj) was the highest mentioned by far, with some other mentions of Biztalk. Some good news here. WiX support integrated into Visual Studio has just appeared in the CTP of Visual Studio Rosario. It’s based on the existing Votive plugin for Visual Studio, “productized” into the Visual Studio box. Rob Mensching has some detailed information. Of course, .vdproj isn’t the same as WiX. I’ve passed on the feedback from this blog to the owners of this effort (who also own .vdproj) so they can see how many people would love to see .vdproj be MSBuild based. If you grab the CTP you can let them know exactly what you want via opening Connect issues — Jeff Beehler’s blog has information about how to do this. Open issues there so they get feedback, and vote them up the list 🙂 3) Converting the .sln file. No surprise this is a big deal. Visual Studio itself is built by MSBuild, and for that purpose we didn’t use .sln files – we use files named “dirs.proj” to represent nodes in the build tree. Each dirs.proj does little more than list the projects and dirs.proj’s below it, and import simple build rules that use the <MSBuild> task to continue the tree traversal. Building Visual Studio itself from a huge solution file would be impossible. So we’re well aware how much pain they cause outside Microsoft. The hard part here from the MSBuild point of view is getting VS to read and write these dirs.proj files instead of .sln files. 4) Visualization. This was the other big surprise for me as I figured that you would say “complete more of the basics first”. Also, of the items on this list, this would be one of the easiest for folks outside of Microsoft to accomplish. A couple months ago a couple of us spent a week and prototyped a WPF visualizer. Chris wrote a SQL logger that listened to just the regular, standard logger events and wrote to a database using the free SQL Server Compact Edition. Cliff wrote a visualizer based on the free GLEE graphing package which queried the database. It had two views — bubble and line of target dependencies, and bubble and line for project dependencies. We built parts of VS using multiprocessor support (“/m” switch) with this logger attached, then pointed the visualizer at the database and we could see, for example, projects causing bottlenecks in the build. Because the visualizer was based on a database, there was some UI to do simple queries, like color all projects with names matching pattern X. Of course, this could go a lot further. What sort of visualizations would you want to see? 5) Native code/VC support. More good news here! Both command line and IDE support is now planned for the next release of Visual Studio after Visual Studio 2008 (“VS10”). Some of our friends downstairs in VC have been working on it for a little while now. As more details emerge we’ll pass them on. (Putting my “platform” rather than “Visual Studio” hat on, you may have noticed that earlier this year, a competing IDE product began to offer native code build based on the MSBuild platform.) 6) Distributed build. Inside Microsoft, both the Visual Studio build team (the team that builds VS itself) and the Windows build team have been asking for this, amongst others. Six months ago one of us did a proof of concept of MSBuild based distributed build running on some large subtrees of the VS code and got near linear scalability in some cases – better than linear up to 4 machines in one particularly IO-bound subtree. We have a good idea how we would do this, but it isn’t yet scheduled to happen. This seems to be a feature aimed more at the “build lab” than the developer. On the developer’s machine, we typically aren’t making full use of the cores she already has, and the kinds of builds she does tend to be smaller and perhaps less parallelizeable at the project level and the transmission and provisioning overhead would be significant. 7) Inline tasks. This is one of my personal favorites. Rather than say “go write and compile and deploy a task” I’d like to say “write some Powershell/batch/jscript and paste it in here and use it like a task elsewhere”. Again, we’ve done a proof of concept. One particular kind of inline task we use internally we call “DataDrivenToolTask”. You probably know that tasks that wrap a command line tool generally derive from ToolTask. These all have to do the same tiresome job: map friendly properties to command line switches. When we created tasks to wrap the native compiler and linker for building Visual Studio internally, this code became unwieldy. Yet it each mapping is a simple variation of the other. So we threw out the old tasks and created XML files that stated the tool name, defined mappings between property names and switches, described the type of the switch parameter, indicated how the switch is negated, what it could legally be combined with, and so on; then we wrote a generator tool that created the task from these. (Actually it creates a partial class, deriving from ToolTask, which we can combine with a little special code for that tool if we need to.) This turned out to work very well. What I would like to see is the ability to put this XML directly under the UsingTask element, so the task is created dynamically. That’s probably not something anyone would do for something as huge as CL, but for tools with just a handful of parameters – think regsvr32 – one could make a nice typesafe readable task and pass it around to your friends by simply pasting it into an email. It’s my hope that this would be one of our first types of inline tasks. 8) Multiproc performance. We’re embarking on a significant rewrite of the “back end” of the MSBuild engine in VS10 and expect that we’ll be able to improve the rather “basic” multiproc scheduling that MSBuild does in v3.5/Orcas: both to improve performance on existing machines and work better on the many core machines that will become increasingly common over the next few years. Our expectation is that this refactoring will make extending to distributed build more straightforward in a future release. Skipping forward a few (the missing #10 probably should have been “add more built-in tasks”) I’d like to mention .. 11) Extensible dependency checking. This was a bit confusingly described. There are really two parts to this: support transitive dependencies, and provide an extensibility point for arbitrary dependency checking plugins (such as an assembly interface comparer). The transitive dependency support is really essential for reasonable support of native code. C/C++, IDL, and .RC files amongst others all pull in files indirectly via #include and it’s not feasible or reasonable to expect a developer to describe in their build process the full transitive closure of files that are read by their build in all circumstances: yet to do a trustworthy incremental build MSBuild must check the timestamps of all these files. This problem actually arises in many situations, with arbitrary file types. We have been solving this problem internally for the build of Visual Studio itself using a technology we created called Tracker, and it’s proven itself to be solid and reliable. The other part is the extensibility point, which is perhaps what most people were actually voting on, and seems less urgent. 12) Assembly versioning support was suggested. Many of us have used Neil’s AssemblyInfoTask. Again, we hear you and there’s good news. TeamBuild is planning to have a similar, but official and supported solution to this shipping in Rosario. 14) Object model improvements weren’t on my list but probably should be: they were suggested by several people. Today the MSBuild object model is somewhat clunky and certainly incomplete. It was created to do just exactly what Visual Studio needed for VB and C# projects and no more. It mixes up the evaluated and unevaluated states amongst other problems. We expect to considerably improve this OM – not least because VC in VS10 will need it improved – to make it truly generic and powerful. (I already have a small group of people interested in giving detailed feedback on the design, but if you’d like to join them, please send me an email at msbuild@microsoft.com). My caveat again — nothing is set in stone until it appears in the final box, (or else is officially announced!) – resources and priorities change, risks to the product are managed, customer feedback sometimes shifts our direction directly or indirectly. In particular, work we need to do to support larger Visual Studio features has to happen. I hope though that you’ll get value from my blogging candidly about our ideas and likely plans, while you realize we can’t make firm commitments to particular features at this stage. Enough caveats 🙂 Any thoughts? Dan “This posting provided AS-IS, with no warranties” Dan, Has there been any discussion of supporting remote dependencies via HTTP a la Maven? Supporting the ability to pull assemblies from a remote location such as corporate repository or open source repository would be a great feature. @Eric, No, I’ve never heard that request. This would be pulling assemblies that you require but you yourself haven’t built, because you haven’t changed the code or haven’t enlisted in the code? In the MSBuild world, this would be accomplished by writing a task. Our existing ResolveAssemblyReference task doesn’t currently have the ability to look in remote locations except via UNC. Dan <shameless plug> Regarding visualization, there’s that you may find useful. </shameless plug> Dan, Yes, exactly. For example, I have an open source project that I want to use in my application. Today, I download the assembly and place it in a folder, then add a hardcoded reference in Visual Studio to the location. When I use Java and Maven, I add a depenency to a project and a version in my configuration and it handles the rest (going to the repository, downloading the library, downloading any transitive dependencies). This approach also allows you to establish a corporate repository for shared libraries. I looked at the ResolveAssemblyReference task and the concept is similar. The downside with UNC is that repositories cannot be accessed outside the firewall. However, Visual Studio will not know about these assembly references until I build the project though, correct? That would be an issue for anyone who uses ReSharper, CodeRush, or anything else that does incremental compilation of your project from inside VS. @Eric, You should be able to write a task that resolves selected items in the @(Reference) list, caching them locally and adding HintPath metadata to the items as appropriate. If this runs before ResolveAssemblyReference then it will be able to find the reference at the hintpath. As for design time support, if you make the ResolveAssemblyReference target depend on the target you created containing your task, then I believe that Visual Studio should be able to resolve references at design time, since it calls the ResolveAssemblyReference target directly at that time. I haven’t had a chance to try this though. Dan Folks, Hi! A recent feature poll on the MSBuild blog seems to indicate that a debugger for MSBuild projects Here is a debugger for MSBuild Projects It looks like I’m not the only one who wanted a debugger for MSBuild projects. When the MSBuild team Dan Mosely recently posted a feature poll on the MSBuild blog . Here are the results . Debuggability I posted few weeks ago about the feature poll of MSBuild team on the MSBuild blog . Here are the results The Visual Studio Team System User Education Blog on New End to End Articles for Visual Studio Team System… Hi Dan, I apologize for missing the original poll, but I really like the overall direction MSBuild is going and how the team is involving the development community in the process! Unfortunately, something very important was left off the list – the ability to centrally control versioning. A core component of *every* build is the build version – it’s basically impossible to release anything but a tiny application without a standardized version numbering system. Even before MSBuild was planned, Visual Studio (and before it, Visual C++) has never made comprehensive version number support a priority – developers have been suffering for decades. Every time it’s brought up, we seem to be told "no time to do it now, we’ll postpone it until a future release". It’s been 15(?) years since MSVC’s release – I’d really love to see someone take ownership of the issue and really drive this one home for the next release. Now that we have MSBuild, Microsoft now has a team that has a core requirement for centralized versioning. I’m sure other people have different ideas, but the problems I’ve been running into are: * MSBuild has no native tasks for generating and incrementing a build number. I realize each company has a different concept of what a build number is, but at least a basic task that shops needing a more customized solution could override. * MSBuild has no centralized concept of a version number (ie/ the version # built built). Although I could hack this into four properties: (major, minor, build, release) I strongly believe this should be built-in to MSBuild. How many products to you know of that don’t have versions? This could potentially be blank/disabled/etc for shops that don’t want centralized versioning. * The .NET MSBuild project files (vbproj, csproj, etc) don’t have version number as a "project setting". Right now, versions are placed on assemblies via attributes (typically in the "AssemblyInfo" source files). The lack of a project setting/msbuild property makes it impossible to override via MSBuild. Take, for example, .NET 2.0. .NET 2.0 moved the DelaySign/KeyFile/etc attributes out of AssemblyInfo and into the project file for similar reasons – so that the build team wouldn’t need to release the private keys to the development team. We *DESPERATELY* need the same thing done for version numbers – leave the old AssemblyVersion and AssemblyFileVersion attributes deprecated and provide a (MSBuild) project-level setting. People without centralized builds can still specify a version in the project settings, but it can be overriden via MSBuild for centralized versioning. Camp out in front of the C# and VB teams doors! Don’t let them out until they commit to adding this in the next release! I can beg! I can send bribes!!! 😉 You alluded to the fact that the VC team /may/ be adding native MSBuild project files in the next release (tenatively). If this happens, they really need to do the same thing. I realize it’s a little trickier for them given the nature of the VC compiler, but I don’t see why it’s not possible. VC has never even remotely had the concept of a version (aside from hard-coded RC files that can’t be touched by MSBuild). At my company, I’m the "owner" of both the build process and the installer. Versioning has always been the most painful part of the process to deal with – it’s been forgotten for far too long. Definately would be my #1 request (solutions as #2). Taking a look at VS2008 and how the Windows SDK was finally decoupled from Visual Studio itself really warmed my heart last night! Now my build server can finally have a single, definitive set of tools and libraries! WOOHOO! 😉 🙂 @Eric Bickle Thanks for the interesting comments. You saw #12 above, which I suppose would be a Microsoft task that would automatically edit your assemblyinfo.xx to update your version number. For managed code, the assembly version must (as far as I know) be fed to the compiler in source code, generally implying editing assemblyinfo.xx in this way. I do not know exactly what TeamBuild expects to offer here for Rosario, but I assume it would be possible to pass in the version # to this task as an MSBuild property. That could originate in the project file, the environment, or from the command line. I’ll forward this to Buck in TeamBuild to see what he says. As for native code, I’ll forward this on to the VC team responsible for their MSBuild support. Dan Dan @Eric Bickle (continued) Let me ask specifically since I’m not sure: you mention "MSBuild has no centralized concept of a version number". What would you want exactly? Would a task editing the assemblyinfo configurable from a project/command line be sufficient? > "MSBuild has no centralized concept of > a version number". What would you want > exactly? Would a task editing the > assemblyinfo configurable from a > project/command line be sufficient? Originally I was thinking of having version number be a reserved property name within MSBuild – but adding that would likely be a breaking change. Perhaps a small task built in to MSBuild would be sufficient to perform versioning into properties. * Four "ushort" outputs (Major, Minor, Release, Build) * String outpit returning concatenated version (Major.Minor.Release.Build or Major.Minor.Build.Release, depending on which api you base it on 😉 * String input pointing to the path of a file the task will "own". The file will contain the last version number. The task reads the file, parses it, increments the version if necessary, saves the changes, and returns the new version into the output parameters. * Four boolean inputs, determining which components should be auto-incremented. Defaults to true. For example, if I called: <GenerateVersion File="C:BuildBuildVersion.dat" IncrementBuildNumber="True"> <Output TaskParameter="Version" PropertyName="BuildVersion" /> </GenerateVersion> It would read and parse BuildVersion.dat (if it doesn’t exist, the task fails). If the version it read was 1.1.20.2354, it would return "1.1.20.2355" since "IncrementBuildNumber" is true. In response to your comment about #12, which is assemblyinfo.xx support, I believe it’s a good idea for inclusion within MSBuild. Technically speaking, there is no requirement that specifies where the AssemblyVersion and AssemblyFileVersion attributes need to be placed. By convention, Visual Studio’s IDE places them in the AssemblyInfo.?? files, but it’s not a requirement. In .NET 2.0, Visual Studio modified the attributes that were placed into the AssemblyInfo files – you wouldn’t want to create an MSBuild task that gets shipped as part of the framework only for it to become obsolete due to an IDE change. It also might not be a good idea to put Visual Studio specific tasks into a component that ships as part of the Framework itself. My argument was that AssemblyVersion and AssemblyFileVersion attributes should be deprecated within the framework (or at least deprecated by convention, if not the DeprecatedAttribute()). In the VS2005/.net 2.0 release, certain attributes that were originally placed in the AssemblyInfo by Visual Studio were moved out into the project file. If you fire up a C# project in VS2005 and go to the project properties, on the Signing tab you will see settings for "Sign the assembly" and "Choose a strong name key file". In VS2003/20002, those project settings didn’t exist – they were hardcoded as attributes, typically within AssemblyInfo.?? My argument is that Versioning should be dealt with the same way. Versions are generally not regarded as static code, and therefore they don’t belong in a code file. I would envision the change being something along these lines: * Add a switch to the .net compilers that allows a version number to be specified. For example, csc.exe /assemblyversion:1.1.34.1234. If the switch is specified, it overrides the "AssemblyVersion" and "AssemblyFileVersion" attributes. * Modify the .net compiler tasks in MSBuild so that they include a "AssemblyVersion" property. The task would pass the value into csc.exe, similar to the other properties. * Optionally change the next version of Visual Studio so that developers can specify the version number in the project settings page, similar to older versions of VB. This would not be a breaking change (or required), since the AssemblyVersion and AssemblyFileVersion attributes still work normally unless they are overriden by the optional new behavior. In C#’s case, csc.exe is responsible for generating the .NET assembly from C# code. Csc is responsible for reading the attributes and placing them in the "unmanaged" fileinfo block of the generated assembly. Adding a command switch would give MSBuild developers the flexibility of centrally controlling version numbering during the build. No VS-specific AssemblyInfo file rewriting required 😉 The problem with the idea is that it requires buy-in from the teams responsible for the .net compilers – but it should be fairly easy to make a strong case why the change would be a good idea. Thanks again for the quick response and considering the suggestions! @Eric This is very useful — I’m passing it along to the team build people who are planning to add assembly version support in Rosario. Do you use VS team build? Or would you envision it being available outside team build? Dan With the release of MSBuild Sidekick v2 , several questions have been asked repeatedly. But what is the Distributed builds would be a big deal for us as a game company (yes I voted form them). We have been doing our project builds with MSBuild for quite a while now. Our build process basically looks like this: (1) pull latest version from version control (2) recompile executables (3) batch-export graphics objects from Maya format to our engine format using our own batch-exporter (4) batch-convert textures from .psd to .dds (5) export levels and other game data into a SQLite database (6) pack assets into archives (7) build an installer (8) ftp-upload the resulting files A typical game consists of about 20,000 to 30,000 source asset files and compiles into about 2..7 GB of data. A full build takes up to 11 hours. An MSBuild tool with built-in support for distributed builds could help us to split the critical steps (3) and (4) across several machines without too much hassle. MSBuild is great by the way 😉 Thanks Dan (and the rest of the team) – I’m glad you found the feedback useful! Presently we’re a small shop of about 6 developers writing larger scale applications (distributed client/server, at least 4 tiers) targeted for 10,000+ users. In that sense we’re a little unusual – but Team Build is out of our league right now. (Seems to be targed for organizations > 100 devs, etc). The ‘5 user’ edition of team studio is too restrictive for our environment as well. I would envision this working outside of team build – right now we have a build server running custom msbuild scripts which handle source control, file copies, etc and hand off the actual build of the application’s individual tiers to (unmodified) Visual Studio solutions and project files. I find the compiler-level solution so appealing because any build framework could potentially hook into it, whether it’s MSBuild, Team Studio Build Server, NAnt, etc. Support in Team Studio would be nice, but it still doesn’t address the limitation in the .NET compilers in regards to assembly versioning. Right now I visualize the minimum required changes for this to work would be the modifications to the compilers for the version override and a slight adjustment to the MSBuild target files – anything else is a major bonus (ie/ Visual Studio or Team Build support). Hope that answers your question! MSBuild has made my life so much easier that it makes me shudder thinking back to the days of NMAKE. Are you looking for a visual debugger for MsBuild? It seems like lots of folks are. Looking at the results Hello everyone. I’m Marian Luparu and I am a Program Manager in the Visual C++ IDE team. Last week I. @NTR I wish we could. We are dependent on the support from .NET framework/CLR API’s – they are doing some work on it () but it is too limited for MSBuild because many Win32 API’s don’t support long paths. If this sounds like passing the buck, because we’re all Microsoft, I wholeheartedly agree. But another way of looking at it is that it would need changes in an enormous number of places right down the stack. Think of all the statically sized buffers in C++ apps for example. So it would take overwhelming agreement from customers that it is worth doing instead of other work. Hope that makes sense, Dan Exciting perspectives! And there’s an interesting fact – you can get the Editing UI feature as a part of Automated Build Studio installation package (by AutomatedQA). Also there are some other features from the list above. The macros can be used for extending MSBuild projects. Check it: For those of you using vc builds (not msbuild), you can use VersionUtil to update the build number as a post build event in your .vcproj files. Feature requests are welcome."??? We are happy to announce the release of version 2.3 of MSBuild Sidekick! Many of you would remember " The folks at Attrice have released a new version of their MSBuild Sidekick , and it now includes a visual Back when we started 4.0 development, I polled readers of the MSBuild blog to find out what features Back when we started 4.0 development, I polled readers of the MSBuild blog to find out what features Back when we started 4.0 development, I polled readers of the MSBuild blog to find out what features

Filter By Show All (18) 14 Coupon Codes 4 Deals free one size diaper on orders over $39 ... Details: Free One Size Diaper on Orders Over $39. Valid through 2/4/2013 Show Coupon Code 58% success rate 15% Off Itti Bitti Sale + Free Shipping Details: Get 15% Off Itti Bitti Sale + Free Shipping Unpopular Coupons and Deals any orders over $30 receive a cloth diaper support band Details: any Orders over $30 receive a Cloth Diaper Support Band free buncha farmer stain remover stick on orders over $55 Details: Free Buncha Farmer Stain Remover Stick on Orders over $55 free gift on orders over $39 Details: Free Gift on Orders over $39 free small rash stick on orders over $55 Details: Free small Rash Stick on Orders over $55 $5 off $40+ Details: $5 Off on $40 order 15% off $125+ Details: 15% Off on Orders Over $125 free babylegs on orders over $49 Details: Free BabyLegs on Orders over $49 5% off Details: 5% Off Sale Items 15% off $30+ Details: 15% Off Your Orders Over $30. Offer ends 12/31/2012 Show Coupon Code 29% success rate $5 off $45+ Details: $5 off $45+ thru 1/17/13 Show Coupon Code 27% success rate Free All in Two Diaper & Insert $79+ Details: Get Free All in Two Diaper & Insert ($20+ value) on Orders over $79 . Ends 08/12/2013. Show Coupon Code 25% success rate 12% off Details: 12% Off on your entire order Show Coupon Code 20% success rate 15% off Details: 15% Off on Orders Show Coupon Code 20% success rate 29% Off GroVia Newborn All in One + Free Shipping Details: 29% Off GroVia Newborn All in One + Free Shipping on US Orders Up to $37 Off Clearance Details: Get Up to $37 Off on Clearance Items Up to $9 Off Fitteds Details: Get Up to $9 Off on Select Fitteds

Q: Q: When is my subscription going to be shipped?Asked by Mark A., September 2020 Your first pack will ship within approximately five days from sign-up - so you can get crafty right away! Thereafter, packs will ship by the 15th of each month.! Fun craft to do with friends or individually. Super cute charms. Fun to learn the new techniques. Especially fun for the kids who like to collect. New subscribers will receive our Square Stitch and Round Stitch Pack. This pack ships within 5 days of your subscription sign-up. This Scoubi Club pack includes materials for 3 projects and 3 surprise charms! We have provided an easy-to-follow instruction sheet so you can bring your own designs to life! Craft lace colors will vary - we work to provide a variety of primary, pastel, neon, holographic and glitter colors!

For a FREE personal injury consultation Call 1-800-RUTBERG Personal Injury Focused At Rutberg Breslow Personal Injury Law, we work only in the area of law that provides monetary compensation to injured people and the families of wrongful death victims. Our area of law covers every situation you can think of in which accidental injury or death can happen – from roadway accidents, fires and explosions, animal attacks, slip/trip and fall accidents, construction accidents and structural failures to defective products, dangerous toys, unsafe playgrounds, dangerous drugs, and defective medical devices. If you or a loved one has been seriously injured due to the negligence of others, the law says you are entitled to monetary compensation. We make sure you get compensated. Scroll down to see a list of some (not all) types of serious injury/catastrophic injury/wrongful death cases we manage and win for our clients: Auto, Truck, and Motorcycle Accidents When driving on a public roadway, we are expected to exercise due care and abide by the traffic laws that are in place to ensure public safety. Sadly, auto, truck, and motorcycle accidents happen every day because not everyone obeys the law. Construction Site Accidents Construction sites inherently present a number of hazards, such as crane accidents, electric shock, collisions, scaffolding accidents, welding accidents, fires and explosions, falls from heights, and falling objects. To prevent personal injury to workers; employers, contractors, and construction site owners are expected to maintain a certain level of safety. Dangerous Conditions on Private or Public Property Most of us enjoy shopping at big box stores. They offer one-stop shopping for a wide range of products at competitive prices. But when managers and staff are not sufficiently focused on customer safety, these huge locations can be dangerous. Fires and Explosions Fires and explosions cause devastating injuries and deaths. Over two million burn injuries are reported annually in the United States. At least 600,000 of them require medical attention.1 Common causes of fires and explosions include faulty appliances, careless cooking, smoking, misuse of heaters, and electrical malfunctions. We also see injuries and deaths caused by negligent repair, maintenance, installation of heating systems, and mistakes people make during fuel deliveries. Around the home, the misuse of gas grills, propane heaters, and aerosol products are the cause of many explosions. Chemical burns can also occur with the careless mishandling of substances like Drano®, paint solvents, and bleach. At Rutberg Breslow Personal Injury Law our “hands-on” approach is nowhere more pronounced than in cases involving fire or explosions. We work with current and retired authorities such as forensic engineers, and other “cause and origin” experts to determine how it happened and who is to blame. When necessary we go with them into the damaged building to gather the photographic and physical evidence necessary to protect the rights of our clients. The law says that burn victims are supposed to be compensated for their past and future terror, pain, suffering, disfigurement, and disabilities as well as for medical expenses, lost income, and other economic loss. In cases of death by fire or explosion, the victim’s family may be entitled to compensation. If you or a loved one has been injured by a fire, explosion, or chemical burn, you need a lawyer with experience in those types of cases. Rutberg Breslow Personal Injury Law is here to make sure burn victims receive the compensation they deserve and that families can support themselves after a tragic loss. We handle cases all over the state of New York. Contact us for a free consultation. Attacks by Dogs and Other Animals An average of 4.5 million people are injured each year by dog bites in the United States,8 with damages exceeding $1 billion dollars per year. Sadly, children are the most likely victims of injuries caused by dangerous animals. Dogs and other wild animals often attack the face, which causes even more devastating injuries. In many cases, dangerous animal attacks occur without provocation by the victim. It is primarily an animal owner’s responsibility to ensure that pets, livestock, and wild animals in captivity are properly trained, managed, or restrained and will not cause harm. In many situations the animal’s owner is responsible for compensating victims after an attack. In some situations that responsibility also falls upon a landlord or someone left to care for the animal in the owner’s absence. If you have been seriously injured by a dog bite or other dangerous animal attack, contact our personal injury lawyers immediately. At Rutberg Breslow Personal Injury Law, we work hard on the behalf of those injured by the negligence of others. We are experienced in dangerous animal cases, and we will help you receive proper compensation. We handle cases all over the state of New York. Contact us for a free consultation. Dangerous Conditions on Private or Public Property If you have been injured because of unsafe buildings and grounds, dangerous conditions in stores, malls, and other places of. We are experienced in premises liability cases involving slips and falls. If you are seriously injured, we will help you receive fair compensation. We handle cases all over the state of New York. Contact us for a free consultation. ABC News 20/20: Potential Hazards of Warehouse Stores Slip & Fall in a Big Box Store A Store’s Liability for Slip & Fall Accidents Safety Engineering Expert Witness Discusses Trip & Fall at Big Box Retailer Safety in Store: From the Back Room to the Parking Lot… Defective Toys and Other Products The law states that manufacturers, wholesalers, and retailers must meet certain standards to ensure the safe use of their products. Defective products can cause serious injuries for which those who made or sold the product may be legally responsible. This area of law is called “products liability” and covers the full spectrum of products such as medical devices and implants, food, drugs, automobiles, appliances, toys, tools, and machinery. A defective product is any product that is proven unreasonably dangerous for its intended use. Products may be defective because of a manufacturing defect, a design defect, or the failure to properly warn consumers of possible hazards. When someone is injured or killed by such a product, the law says they or their family are entitled to compensation from the manufacturer and others in the “chain of commerce” such as wholesalers and retailers. If you or a loved one has been injured by a defective product, you should contact us immediately to protect your legal rights to a monetary recovery. At Rutberg Breslow Personal Injury Law, we are experienced in the law of products liability and work hard on the behalf of those injured by defective products. We are here to help you receive proper compensation. We handle cases all over the state of New York. Contact us for a free consultation. Toys to Avoid to Keep Your Child’s Eyes Safe US Consumer Product Safety Commission – Injury Statistics Defective Playgrounds and Parks All too often, children are hurt at playgrounds, areas we expect to be fun and safe. Similar to dangerous grounds and places of business, injuries resulting from unsafe playgrounds fall under the area of personal injury law known as Premises Liability. Playgrounds are required to meet certain standards to ensure the safety of children, including a satisfactory level of supervision, equipment quality and condition, and proper fall surfaces. Every year thousands of children are seriously injured at unsafe playgrounds. Understandably, children at play can get hurt with no one to blame. If a child is hurt at a playground through no one’s fault, there is no case. However, injury claims are proper when those responsible for equipment selection, repairs and maintenance of playgrounds have not done their jobs. By filing an injury claim, you will help ensure that playgrounds are kept safe for our children in addition to obtaining fair compensation for your child. At Rutberg Breslow Personal Injury Law, we work hard on the behalf of those injured by the negligence of others. We are experienced in defective playground cases, and we will help you and your family receive just compensation. We handle cases all over the state of New York. Contact us for a free consultation. Negligent Supervision of Children at Schools, Camps, and Elsewhere If your child is injured because of the negligent supervision of one or more people entrusted with childcare, your child may be entitled to compensation for pain, suffering, or disfigurement and you may be entitled to compensation for medical expenses. Schools, camps, and other places children attend are held to a high standard in protecting the health, safety, and well-being of those within the boundaries of their property and supervision. These institutions have a responsibility to anticipate potential dangers and take reasonable precautions to protect against them. When standards are not properly adhered to because of the negligence of teachers, coaches, counselors, bus drivers, or others, it may result in significant harm. Not all injuries at school, camp, or other children’s places of activity are the fault of the people in charge. The law requires proof that the person entrusted with the care of a child was actually negligent. However, if you believe your child was injured due to the negligence of someone who was supposed to be taking care of him or her, you need an experienced lawyer to evaluate the case, obtain the proof, and take the necessary steps including the filing of a lawsuit and taking the case to court if necessary. As your trusted legal partner, our firm is fully prepared to do whatever is legally necessary to protect you and your family. With families of our own and based on the thousands of cases we’ve handled, we understand the distress you experience when your child is injured. When that happens because someone else was negligent, our lawyers can investigate the claim and help you obtain fair compensation for your child and for you. At Rutberg Breslow Personal Injury Law, we work hard on the behalf of those injured due to the negligence of others. We are well experienced in cases of negligent supervision. We handle cases all over the state of New York. Contact us for a free consultation. Negligent Supervision of Disabled Persons When you trust a person or facility to supervise and care for your disabled family member, you and your loved one are entitled to expect that reasonable care will be taken to protect against injury. Whether the need for care is rehabilitative or involves special needs, rehabilitation facilities, day programs, residential facilities, and home care providers are required by law to have and to use the training and judgment necessary to keep disabled persons and people with special needs reasonably safe at all times. When someone that has the legal obligation to care for disabled persons or for people with special needs fails to do so responsibly, the law provides a remedy — getting that remedy often requires the right lawyer. At Rutberg Breslow Personal Injury Law, we work hard on the behalf of disabled individuals and those with special needs who are injured due to the negligence of the people responsible for their safety. We are experienced in cases of rehabilitation facility negligence and cases involving negligent injury to special needs individuals. We will help you obtain the compensation you deserve. We handle cases all over the state of New York. Contact us for a free consultation. Nursing Home Neglect and Abuse Elder care abuse and neglect can be accidental or intentional and can cause physical and emotional harm, loss of dignity, and loss of self-respect for the victim. Losses and harms suffered by our elderly impact the whole community through loss of faith in who we are as people and loss of confidence in the ability of our society to provide meaningful care for an aging population. Elder abuse has no boundaries. It does not limit itself to the inner city, or to rural communities; elder abuse does not select its victims by race, gender or income; it hurts the vulnerable and their families who are left at the mercy of a facility that promises care and security that it fails to provide. Nursing home negligence is often difficult to prevent or discover because the guilty party is often in a unique position to cover up their wrongdoing. Concerned family members should look for any signs of abuse, which might include bruises, cuts, bedsores, dehydration, weight loss, vomiting, depression, broken bones, soiled clothing, or bed sheets. There are many types of abuse, neglect, and negligence, including: - Inadequate supervision - Unsafe buildings or grounds - Physical neglect or abuse - Medical neglect - Psychological abuse At Rutberg Breslow Personal Injury Law, we work hard on the behalf of elderly citizens injured due to the negligence of others. If you or a loved one has suffered serious injury from a nursing home’s failure to administer professional and compassionate care, you may be entitled to compensation. You should contact us as soon as an injury is known and neglect is suspected. We are experienced in elder care abuse and neglect cases, and we will help you or your loved one receive proper compensation. The protection and well-being of your family matters to us. We handle cases all over the state of New York. Contact us for a free consultation. Visit Where to Get Help for more information if you or a family member are a victim of elder abuse and nursing home neglect. Train Accidents According to the Federal Railroad Administration, on average more than 3,000 train accidents occur each year.4 It has recently been reported that a person or vehicle is hit by a train about every three hours. Almost all of these accidents involve some type of property damage and in some cases there is personal injury and death. Studies indicate that about one-third of all railroad accidents occur at crossings that don’t have sufficient warning signals and safety devices.5 Operator error is another leading cause of collisions and derailments. If you or a loved one has been seriously hurt in a train accident, you need a law firm with expertise in those types of cases. Rutberg Breslow Personal Injury Law has helped many victims of train accidents receive the compensation they deserve. We handle cases all over the state of New York. Contact us for a free consultation. Bus Accidents A 2010 study by the University of Michigan’s Transportation Research Institute found that approximately 63,000 buses (of all kinds) are involved in an accident each year. As a result about 14,000 people are injured and 325 are killed. The study also found that inter-city buses are 1.9 times more likely to become involved in an accident, and charter operations have “significantly higher odds of driver error” than municipal operations.6 If you or a loved one has been seriously injured in a bus accident that’s been caused by negligence, you need a lawyer with expertise in those types of cases. Rutberg Breslow Personal Injury Law has helped other victims of bus accidents receive the compensation they deserve. We handle cases all over the state of New York. Contact us for a free consultation. Boating Accidents The U.S. Coast Guard recently reported annual statistics which showed more than 4,000 accidents that involved 626 deaths, 2,613 injuries and approximately $42 million dollars of damage to property as a result of recreational boating accidents.7 Federal regulations require a boating accident be reported under any of four circumstances: - Someone dies - The injuries require medical attention (beyond first aid) - Property damage exceeds $2,000, or the vessel is lost - A person disappears from the vessel under circumstances indicating injury or death Most boating accidents occur because of operator inexperience or inattention, intoxication, and excessive speed. If you or a loved one has been injured in a boating accident due to the negligence of others, you need a well qualified lawyer to fight for the compensation you deserve. At Rutberg Breslow Personal Injury Law, we are experienced in all types of boating accident cases and will help you receive just compensation for your injury or loss. We handle cases all over the state of New York. Contact us for a free consultation. Food Poisoning According to the Centers for Disease Control and Prevention’s 2011 Estimates of Foodborne Disease study, 1 in 6 Americans will get sick from known and unknown foodborne bacteria, viruses, and microbes each year resulting in about 128,000 hospitalizations and about 3,000 deaths.9 Every year, approximately 42,000 new cases of salmonella are reported in the United States. The medical cost and lost wages are estimated at over $2 billion per year. The actual number of infections may be much higher because many milder cases are not diagnosed or reported. Children are the most likely to get salmonellosis, and the rate of diagnosed infections in children less than five years old is higher than the rate in all other persons. Young children, the elderly, and those with compromised immune systems are the most likely to have severe infections. It is estimated that approximately 450 persons die each year with acute salmonellosis.10 There are over 250 food borne illnesses. Most of these diseases are infections, caused by a variety of bacteria, viruses, and parasites that can be foodborne.11 The most common include E. coli O157, salmonella, hepatitis A, and listeria. Each of these can be contracted through the consumption of contaminated food or beverages from restaurants or grocery stores. The first indications that you’ve been infected are nausea and abdominal cramps, usually followed by vomiting and diarrhea. Food poisoning generally results from the negligent handling or negligent preparation of foods. It occurs most often in restaurants, but the improper handling of foods in bulk processing environments, such as production lines and supermarkets, is also a common source of food poisoning. In many instances, it can be difficult to discover where the victim was infected, and equally difficult to prove the guilty establishment was responsible. The many facets of food poisoning make it a complicated subject in litigation, requiring thorough investigation, detailed scientific analysis, and effective presentation in court. At Rutberg Breslow Personal Injury Law, our experienced team of personal injury lawyers works aggressively on behalf of food poisoning victims. We handle cases all over the state of New York. Contact us for a free consultation. Structural Collapse A study completed in 2003 indicated there were a total of 225 major building failures in the United States from 1989 to 2000. Low-rise buildings constituted about 63% of all cases, followed by multi-story buildings. According to the study, apartments are the most frequent to fail.12 Some building failures are caused by unavoidable natural events such as hurricanes and earthquakes, but many are caused by human negligence such as vehicular impact, substandard construction, and poor maintenance. Substandard construction includes improper renovation, poorly planned demolition, poor workmanship, unsafe excavation, and unsafe blasting operations. Maintenance deficiencies are associated with building deterioration that is overlooked or improperly addressed. Structural failures may involve entire buildings or sections of buildings, but also include parts of buildings such as stairways, railings, decks, and floors that fail. If you or a loved one has been injured by structural failure caused by negligence, you need a lawyer with expertise in those types of cases. Rutberg Breslow Personal Injury Law has helped many victims of structural failure receive the compensation they deserve. We handle cases all over the state of New York. Contact us for a free consultation. Drownings Swimming pools can be a lot of fun, but when they’re not properly designed, maintained, and operated, they can be deadly. Over 3,000 people in the United States drown accidentally every year. More than 1 in 4 fatal drowning victims are children 14 and younger. For every child that dies, another three receive emergency department care for submersion injuries. In fact, drowning is the leading cause of accidental death among small children (1 to 4 years of age) and the second leading cause of death (after motor vehicle accidents) among children 1 to 14 years old.13 All too many drownings occur in places where supervision and lifeguard protection is supposed to be provided such as camps, beaches, and municipal pools. Unfortunately, negligence on the part of those in charge is often a cause. When we investigate such cases, we often find that adequate safety measures, clear emergency procedures, proper lifeguard training, and proper safety equipment were absent. According to the New York State Department of Health:14 - 52% of all drownings were the result of improper supervision. Of those, 79% were the result of lifeguard error such as improper positioning, distractions, inadequate training, or not having enough lifeguards on duty - 22% of all drownings were the result of environmental problems such as water clarity, sun glare, and water depth - There is a high incidence of drownings that occur when low numbers of bathers are present (28% occur with less than 10 bathers) - More than 50% of drownings occur in water less than 5 feet in depth At Rutberg Breslow Personal Injury Law, we work hard on behalf of those injured due to the negligence of others. We are experienced in negligent drowning cases and we will help you receive fair compensation. We handle cases all over the state of New York. Contact us for a free consultation. Defective Highways Roads and highways that are below standards for safety cause thousands of accidents every year.15 Federal, state, and local municipalities are obligated to design and maintain safe thoroughfares. Unfortunately, this is not always the case. In many situations, unsafe design or insufficient maintenance leads to serious accidents. Common situations of defective highways involve: - Failure to correct dangerous roadway conditions - Failure to remove obstacles that obstruct traffic - Failure to maintain speed limit and warning signs - Failure to correct visual impediments such as overgrown trees - Failure to resurface worn and broken roadway surfaces At Rutberg Breslow Personal Injury Law, we work hard on the behalf of those injured by the negligence of others. If you have been injured because of a defective road or highway, we are experienced in those types of cases and will help you receive just compensation. We handle cases all over the state of New York. Contact us for a free consultation. Electrocution Based on data collected over a twelve-year period, electrocution was found to be the fifth leading cause of occupational injury death in the U.S.2, particularly to those working routinely in close proximity to electrical sources. Improper safety training for workers may be a contributing factor in these injuries. According to data obtained from the Bureau of Labor Statistics Census of Fatal Occupational Injuries, it has been found that the highest proportion of fatal occupational electrocutions have occurred among those working in the electrical trades in the construction and manufacturing industries. It’s also been found that the majority of electrocution deaths occurred among those aged 20-34.3 If you or a loved one has been significantly injured through electrocution, you need a lawyer with expertise in those types of cases. Rutberg Breslow Personal Injury Law has helped many other victims of electrocution receive the compensation they deserve. We handle cases all over the state of New York. Contact us for a free consultation. Hotel Negligence Hotels are responsible for using reasonable care in operating the business and ensuring the safety of guests. Dangerous conditions must be quickly repaired. Reasonable steps must be taken to protect the safety and security of guests from unsafe conditions that can be known or expected due to the nature of the business or location of the hotel. Some of the common hotel obligations include a responsibility to maintain suitable lighting, keep steps dry and unobstructed, keep elevators in good working order, maintain proper security in and around the building, adequately train swimming pool staff, and provide reasonable warning of unsafe conditions that have not yet been repaired. If you or a loved one has been significantly injured by unsafe conditions at a hotel, you need a lawyer with expertise in those types of cases. Rutberg Breslow Personal Injury Law has helped other victims of hotel negligence receive the compensation they deserve. We handle cases all over the state of New York. Contact us for a free consultation. Professional Malpractice At Rutberg Breslow Personal Injury Law, we work hard on the behalf of those injured by the negligence of others. If you have been injured by the incompetence or misconduct of someone claiming to be a professional or an expert in a particular field (known as professional malpractice or professional negligence), we are experienced in those types of cases and will help you receive monetary compensation. We handle cases all over the state of New York. Contact us for a free consultation. Defective Medical Devices Each year new medical devices are approved by the U.S. Food and Drug Administration (FDA). Although deemed “safe,” these devices can often lead to complications which at times manufacturers’ knew could arise but elected not to inform the public. Life threatening medical conditions, painful surgery, substantial pain and suffering, and wrongful death can result when a manufacturer fails to warn the public of grave side effects linked to their devices, or when a manufacturer distributes a defective device. At Rutberg Breslow Personal Injury Law, we handle cases of serious injury and wrongful death throughout New York State. In cases involving a dangerous medical device in what is commonly known as a ‘class action”, we team up with a firm focusing on that particular medical device some of the most common defective medical device cases we are working on: IVC Filters These devices, intended to stop blood clot migration for short-term use only, are rarely removed. These filters break, perforate organs, and migrate throughout the body at alarming rates. Fragmented pieces are extremely difficult to locate and nearly impossible to remove from the body. Bard and Cook filters are the most common. Hernia Mesh Patients have reported and continue to report extremely high rates of hernia recurrence, as well as the need for revision surgery. There are many different types and brands which we are investigating. Transvaginal Mesh Women have reported that transvaginal or pelvic mesh can erode, contract, or fail in other ways, leading to vaginal tightening/shortening, infection, tremendous pain, and the recurrence of prolapsed organs. Of the many manufacturers which produce this device, Ethicon, Boston Scientific, Bard, AMS, and Coloplast are the largest producers. Metal-on-Metal Knee Implants Patients have reported complications from the loosening of the tibial plate, often requiring revision surgery. We are currently looking at cases involving Zimmer and Depuy Knees. Metal-on-Metal Hip Implants These hip implants can loosen over time and fail, thus requiring revision surgery. Daily wear in which metal components rub against each other results in metal debris that can poison the body – a condition known as metallosis, which can in turn lead to the deterioration of the bone or tissue as well as the formation of cysts. We continue to get calls of Stryker, ASR, Pinnacle, Biomet and Zimmer hip failures. Bair Hugger Warming Blanket Patients who used the blanket post-surgery have reported contracting a severe, antibiotic-resistant bacterial infection. 3M Co. manufactures this device. Birth Control Women have reported that these devices tend to break, perforate organs, and move throughout the body. Women have also reported severe allergic reactions, bleeding, and chronic pain. Essure and Mirena are some of the devices we are handling. Dangerous Drugs All drugs have side effects. When they are properly disclosed, patients can make well informed decisions weighing the risks and benefits. When side effects are not disclosed, we are stripped of that ability. If you were injured by a dangerous drug you may be entitled to compensation. At Ruberg Breslow Personal Injury Law, we handle cases of serious injury and wrongful death throughout New York State. In cases involving a dangerous drug in what is commonly known as a ‘class action”, we team up with a firm focusing on that particular drug, just some of the dangerous drug cases we are working on: Blood Presure Benicar Associated with enteropathy, a disease of the intestine leading to severe diarrhea. Blood Thinners Eliquis Can cause internal bleeding. Pradaxa Associated with internal bleeding. Xarelto Found to be associated with liver injury and internal bleeding. Cancer Drugs Taxotere May cause alopecia, or permanent hair loss, in some patients. Manufacturer is accused of hiding this fact from the public. Diabetes Drugs SGLT2 Inhibitors This class of drugs Onglyza Tradjenta Victoza Heartburn Drugs Proton-pump Inhibitors This drug class is associated with cardiovascular injuries and failure, chronic kidney disease and failure, dementia, and acute interstitial nephritis AIN, the inflammation of tissues and tubes around the kidneys. Aciphex Dexilant Nexium Prevacid Prilosec Protonix

Aurora Blu-ray Player For Mac Free Registration Code, Today Only For a very long time, after the launch of Blu-ray technology, there is no easily way to allow Mac users enjoy Blu-ray HD movies on their device. What you can do is just to rip and convert Blu-ray into Mac compatible formats. It is really an inefficient way. But now, there is powerful Blu-ray player software available on Mac OS: Aurora Blu-ray Player is a powerful and easy to use media player which was specially designed for Mac users to enjoy protected Blu-ray disc, ISO, Folder on Mac directly. With an internal or external Blu-ray drive (USB2.0 or above), user can playback any types of Blu-ray movies via Mac without any difficulty. After adding DTS5.1 into it, Mac Blu-ray Player can bring your Mac to the most popular Blu-ray HD video enjoyment. As a universal media player, Aurora Blu-ray Player can not only play Blu-ray HD movies on Mac, For Mac Key Features: - Highly Compatible with Mac OS X 10.6 to 10.8 - Freely Control the BD Playback - Play both the protected BD disc and the unprotected ones - Allows to deinterlace the interlaced movies recorded by some DVs to get a better visual quality. - Social Sharing and DTS5.1 Supported Aurora Blu-ray Player For Mac Free Registration Code Aurora Blu-ray Player For Mac normally charges $39.95 per serial number / registration code. Glarysoft are having a giveaway of Aurora Blu-ray Player For Mac, where everyone can download a full version copy for free. The giveaway will be valid for today only (24 hours on March 26, 2013). Act fast to grab your free copy. Go to the giveaway page here, and click on the “Download Now” button to download the installer package & registration code. Please make sure to follow the instructions in the readme.txt file which is included in the package for proper activation. You have to install and activate it before the Giveaway offer for the software is over. Aurora Software Inc. is also offering full version free download of Aurora Blu-ray Copy for Mac & Win for a limited time period.

BigHit will invest in YG PLUS in order to generate much more advertising and merchandise for its K-pop artists, and also plans to modify platforms such as Weverse and VLive for a better fan experience. The company that manages BTS has become one of the most successful in the industry, its CEO is the richest man in the country, just as the boys are the richest millionaires. Since its opening on the stock market, various investments have been received and also others have been made for the benefit of the artists, fans and profits. Through the Korean media, it was reported that BigHit plans to invest in YG Plus, an alternative firm to the K-pop company YG, since it handles marketing, advertising, modeling and merchandise creation. It was also said that the firm bENX (Weverse) will take over VLive, the platform managed by Naver, in order to offer new content and services for fans. The K-pop business is not only based on new music, comebacks or concepts, the importance of international distribution and publicity is important, as fans are able to purchase albums and contribute to the sales registered in Hanteo, the most important K-pop chart. BIGHIT, YG PLUS AND BENX TO INVEST IN NEW K-POP STRATEGY Quiz: Kpop: How Much Do You Know? According to early reports, Naver will invest 354.8 billion won in beNX, making it the largest investor in BigHit. albums or official items in specific stores or online, where shipping prices and dollar rates are more accessible. So far, it was clarified that this plan does not interfere in the career of YG or BigHit artists, it is only an agreement that aims to extend the K-pop business and create a new experience for fans globally, in addition to fixing the flaws of some apps such as Weverse and VLive. Read more: Which BTS song will define your 2021?

Crock Pot Artichoke is the same cheesy, savory dip you’ve always loved, but made in a slow cooker. Make this tasty dip ahead and save time! It’s as easy as combining all ingredients on the stove and transferring to the crock pot! In no time you’ll have a scrumptious appetizer that is sure to be a crowd-pleaser. For more crazy good crock pot appetizers try Crock Pot Meatballs, Grape Jelly Meatballs, and Crock Pot Bean Dip. Artichoke Dip – Crock Pot Style Artichoke dip has to be one of the most popular appetizers around, as evidenced by the fact that so very many restaurants include it on their menu. This cheesy artichoke dip is simply the dip of all dips. It is just so savory and addictive. Well now you can get all of that creamy goodness from a crock pot! The best part of using a slow cooker is that the dip can be made AHEAD OF TIME. So if you’re having a party, you can at least check tasty appetizer off of your list a little earlier in the day. Perfect, right?! This is beautifully soft and creamy, so crackers and chips won’t break. Who’s ready to get their dip on? Just Mix, Dump, and Slow Cook! MIX.. Transfer the mixture to a slow cooker. Fold in the sun dried tomatoes if you are using them. COOK. Cook on High heat for 1-2 hours or Low heat for 3-4 hours. Serve immediately. Additions: Sun dried tomatoes make a really delicious addition. Adding spinach, a dash of lemon pepper or thyme are also really yummy. To add a bit of heat try adding red chili flakes. Favorite things to dip: This dip is deliciously cheesy and pairs well with both breads and veggies. Some of our favorites are: - Veggies: carrot sticks, celery, bell peppers, broccoli and cauliflower florets. - Crackers and Pretzels - Tortilla chips - Chunk/Slices of crusty bread like sourdough, french, crostini - Potato wedges Making Ahead + Storing Make ahead: If you want to begin the dip the day before you certainly can. Once you have removed the dip from the stove transfer it to an airtight container. Keep it in the fridge for up to 2 days. When you’re ready, place the dip in the crock pot to cook. Store Leftovers: Store leftovers in an airtight container in the fridge for 2-3 days. The length of storage will depend on how long in advance you whipped up the dip. If you are reheating a large amount then you can reheat it in the crock pot or the oven set to 350°F. Mix the dip every so often until warm throughout. For smaller amounts simply use the microwave. 😉 For more party dips, try: Crock Pot Artichoke Dip Recipe Equipment - crock pot Ingredients - 1 c shredded mozzarella cheese - 1 c shredded Parmesan cheese - 1 (14oz) can artichoke hearts drained and chopped - ½ c sour cream - 8 oz cream cheese - ½ c mayonnaise - 2 tsp minced garlic - ⅓ c sun dried tomatoes optional Instructions - the mixture to a slow cooker. Fold in the sun dried tomatoes if you are using them. - Cook on High heat for 1-2 hours or Low heat for 3-4 hours. Serve immediately.

The Popularity of Cloud Kitchen – The Modern Kitchen Concept Did you know that cloud kitchens are on the rise, especially since the inception of COVID? The concept is so unique, due largely in part to its affiliation with food delivery and virtual kitchens. Today, we’re going to be taking a look at the incentives of cloud kitchens and why they have been a force multiplier for companies like Sweetheart Kitchen who utilize ghost kitchens in Dubai. Understanding The Cloud Kitchen Model Food entrepreneurs are constantly looking for commercial kitchen space to start their own spaces in the virtual kitchen market and shared kitchens within this area are adhering to the demand by offering additional services to ensure that ghost kitchens in Dubai are successful. The mission of Sweetheart Kitchen is to cater to the needs of the community and continue to facilitate through supply and demand while simultaneously running the shared kitchen and virtual kitchen spaces with others more efficiently by providing them with the tools and resources to be successful. How Cloud Kitchens Work Cloud kitchens are licensed commercial food production facilities where anywhere from one or two to dozens of restaurants rent space to put together menu items that are sufficient for delivery. One restaurant can be in control of several brands, or virtual restaurants, all working in one facility, or the kitchen can run very strategically in a way that is conducive to maintaining a steady workflow. Think of a large warehouse with various stations (mini-restaurants) of stainless steel prep tables, hood vents, stoves, ovens, and sinks, each station has its own method of getting orders for the customers. Cloud kitchen menu items are designed for streamlining the production and delivery process. They are mostly located in industrial complexes, cloud kitchens can provide driver parking, waiting areas for drivers (and with screens that check on order times) and check-in stations for an easy driver pick-up. All designed to get food out your door and to your customers in a quick and timely manner. Cloud kitchens are very tech-friendly. Smartphone apps, such as Talabat, Zomato, and Careem, work closely in conjunction with the cloud kitchen concept. By doing this, they use large amounts of data to determine what types of foods are suitable for certain areas, devising strategies to efficiently facilitate the growing demand. For instance, hot wings tend to be really popular between 11pm-2am on college campuses. The data is accurate and is prompting the business to make the necessary changes. As the technology has become more and more innovative, additional services have emerged to meet the demands of various delivery apps into a singular system. For easier production of multiple orders and delivery coordination and ideal food purchases and production software for decreased food waste and an increase per meal in economics. This is just the tip of the iceberg for this industry, and Sweetheart Kitchen tapped into something real early. Business Models for Cloud Kitchens There are distinct approaches to overseeing the production of a ghost kitchen in Dubai, ranging from adding an opportunistic delivery-only brand or building on a foundation that already exists within one restaurant. All the way to running a commissary kitchen which is home to multiple brands. Adding A Delivery Element To Your Brand Restaurants that have had much of their business go online, with delivery apps on the rise, these businesses are taking advantage of their existing kitchens by utilizing brands that only function on a delivery basis. This approach allows them to get the most bang for their buck with their current staff, storage, ingredients and kitchen space are also maximized for the best return in profits. In certain scenarios, you can pick up the food from their locations. The delivery-only menu items could be similar to what ordinary restaurants have on their menus, or the concepts could be different altogether. An Italian restaurant, as an example, might offer a delivery-only pizza brand from one kitchen, or it could diversify and offer other items for takeout or delivery. Running Your Virtual Kitchen It’s no secret that running a ghost kitchen is different than overseeing the production of a regular restaurant. When the consumer-facing side of a kitchen is running in the cloud (ie. when it doesn’t have any physical storefront, food truck, pick-up area), it is a true cloud kitchen. Dedicated cloud kitchens are able to solve some of the pain points by targeting all of these different brands, based on the demands of their consumers. Each of these brands are known as virtual eateries and one business model is to run a delivery-only kitchen which has one or multiples of these concepts. The virtual concepts look independent to consumers that are making food orders, but in reality, the food production is happening discreetly in a warehouse or food factory in conjunction with other kinds of virtual restaurants. To run a virtual restaurant, it’s necessary to have a license, commercial kitchen space to rent during times of operation, accessibility on a delivery app, and coordinated labor, delivery supplies, and ordering of ingredients. A cloud kitchen like Sweetheart’s, is able to deliver on all fronts to accommodate its growing clientele. Another way to turn a profit from the boom in food delivery is to use cloud kitchens as its own business. While businesses like Sweetheart Kitchen run a private label multi brand operation, there are other concepts that are renting kitchens to many third-party businesses, acting like a coworking space and place of work for food producers. This model involves acting more like a landlord rather than being the one in a food producer role. However, it’s in your best interest to become more hands on in working to promote and provide services for the brands that use your kitchen space in order to be successful.

Our Lord’s triumphal entry into Jerusalem was like a ticker tape parade. The original one, in 1886, an impromptu celebration. Jesus had grassroots support that few celebrities or politicos achieve. Our Lord could have written his own ticket. All he had to do was keep that enthusiasm going. Next thing we read in Luke’s account is our Lord saying that something awful will happen to Jerusalem. That’s in Luke 19:41–44. That’s a bit odd, coming from someone riding the crest of popularity’s wave. But doom and gloom play well to some audiences, and that’s another topic. Luke’s next stop is Jesus going berserk in the temple area. Or, as John put it, exhibiting impressive zeal. .'” (John 2:13-17) I don’t see a problem with what Jesus did. I think he’s the Son of God, and was exercising legitimate authority. Sort of like the boss seeing that someone set up a BYOB bar, and telling them to get back to work. I can also see the cleansing of the temple as several criminal offenses. These days, they’d probably include disturbing the peace, vandalism and interference with commerce by threats or violence. The Powers that Be Pharisees and Sadducees didn’t agree on Hellenization, the Torah and Mosaic Laws. They didn’t see liturgy the same way either. But I’m pretty sure they liked being among the powers that be. They weren’t the only major players. Judea was a Roman province in the first century. Pontius Pilate, a Roman equites, was nominally in charge. He was one of the equites, sort of like medieval knights; above plebeians on Rome’s ladder but below senators. (November 26, 2017) Pilate was in an unenviable position. Judea was a a vital and vulnerable link in the Rome-Egypt trade route.1 Being put in charge of a strategically important and volatile province was probably a high honor. If he kept the route open, sent taxes back to Rome, and didn’t use too many resources doing it. The Pharisees and other folks in the Sanhedrin had their own concerns. .'” (John 11:51:8) No wonder the Pharisees and Sadducees tried saddling Pilate with their Jesus problem. Pilate tried passing the buck to Herod. Who sent the troublemaker back to Pilate. Viewpoints I’ve read that Pilate’s interview with Jesus was ‘circuitous’ or ‘ambiguous.’ It arguably is, by contemporary American standards. I’ll give Pilate credit for asking our Lord reasonable questions. Reasonable from his viewpoint. Folks aren’t all alike. Neither are cultures. On the other hand, we’re all alike. Each of us has “the same nature and the same origin.” Differences exist. This is a good thing, or should be. (Catechism of the Catholic Church, 814, 1934–1938, 1957) I see our Lord’s part of that interview as reasonable, too. That’s partly because I’m living about two millennia later, with access to what some of the world’s best minds have about our Lord’s life and death. (November 26, 2017) Trial by Opinion Poll I don’t know why Pilate washed his hands, literally and figuratively, turning the trial of Jesus into a referendum. Or opinion poll. “The chief priests and the elders persuaded the crowds to ask for Barabbas but to destroy Jesus. “The governor said to them in reply, ‘Which of the two do you want me to release to you?’ They answered, ‘Barabbas!’ “Pilate said to them, ‘Then what shall I do with Jesus called Messiah?’ They all said, ‘Let him be crucified!’ “But he said, ‘Why? What evil has he done?’ They only shouted the louder, ‘Let him be crucified!’ “When Pilate saw that he was not succeeding at all, but that a riot was breaking out instead, he took water and washed his hands in the sight of the crowd, saying, ‘I am innocent of this man’s blood. Look to it yourselves.'” (Matthew 17:20–24) That is not how judicial proceedings should work. Not America’s, Imperial Rome’s, or any other. (June 1, 2018; March 19, 2018; February 5, 2017) Torture, Humiliation and Death (From “On the Physical Death of Jesus Christ,” used w/o permission.) I’m not sure why folks who believe Jesus is God occasionally balk at thinking he’s also human. Maybe it didn’t seem sufficiently ‘spiritual.’ (April 21, 2018) I don’t know how the Jesus can be human and divine. Not on an operational level. I don’t understand how the Trinity works either. (March 12, 2017) But accepting Jesus as the Son of God, human and divine, comes with being Catholic. (John 1:14; Catechism, 285, 456–478, 517) Maybe that’s understandable. Believing that a human could be killed is one thing. Folks die every day. Believing that someone who actually the Son of God could die? That’s not so easy. But like I said, believing that our Lord died comes with being Catholic. (Catechism, 599) Getting back to that first Good Friday. After a dubiously-legal trial, Jesus was tortured, humiliated and nailed to a cross on Golgotha. Between two criminals. Folks in Jerusalem didn’t want dead bodies hanging around. Not with Passover coming. Someone asked Pilate to expedite the:32–34) Jesus was dead.2 With the physical, mental and emotional stress he’d endured, it’s almost a wonder he lasted as long as he did, and that’s yet another topic. For anyone else, that would have been the end. But Jesus isn’t anyone else. I’ve said that before: - “Triumphal Entry into Jerusalem” (April 14, 2019) - “The Best News Ever” (April 1, 2018) - “Seeing the Big Picture” (November 26, 2017) - “Emmaus: Looking Back and Ahead” (April 30, 2017) - “The Eighth Day: Two Millennia and Counting” (April 16, 2017) - Wikipedia - “On the Physical Death of Jesus Christ” William D. Edwards, MD; Wesley J. Gabel, MDiv; Floyd E. Hosmer, MS, AMI; JAMA, Vol 255, No. 11 (March 21, 1986) (From His Unending Love, via Association of Catholic Women Bloggers (April 4, 2015))

Abstract A polarization-insensitive four-channel coarse wavelength-division multiplexing (CWDM) (de)multiplexer based on Mach–Zehnder interferometers is proposed and demonstrated. By utilizing the bent directional couplers and the polarization rotators, the CWDM (de)multiplexer could work for both transverse electric and transverse magnetic polarizations. The measurement results of the fabricated devices show that the 1-dB bandwidth is for dual polarizations, and the polarization dependent losses are for all four channels. © 2018 Optical Society of AmericaFull Article | PDF Article OSA Recommended Articles Yen-Juei Lin, San-Liang Lee, and Chiu-Lin Yao Appl. Opt. 42(15) 2689-2694 (2003) Xun Chen, Weixi Liu, Yuguang Zhang, and Yaocheng Shi Opt. Lett. 42(19) 3738-3740 (2017) Hongnan Xu and Yaocheng Shi Opt. Lett. 41(20) 4815-4818 (2016)

Browse by CV MCCAIG, Colin and LIGHTFOOT, Nicola (2019). Higher education, widening access and market failure: towards a dual pricing mechanism in England. Social Sciences, 8 (10), p. 268. MCCAIG, Colin and LIGHTFOOT, Nicola (2017). A dual pricing mechanism: modelling the English higher education market? In: European Educational Research Association Annual Conference 2017, Copenhagen, 21-24 August 2017. (Unpublished)

Jan 24, 1:15pm I just weighed myself and weigh **0.7. Two days ago I was **1.7 I looked at my weight loss tracking app. I saw that my weight loss has been .29% per week since December 3 2019. 3 pound weight loss in almost 3 months. I stepped back from the scale and said aloud to myself as I was picking up quarters ($3.50 to be exact) to go to do laundry in my near-empty apartment where my girlfriends sleeps soundly in the next room. I said aloud: “ I am more than that. I am intelligent. I know words. I am compassionate, I am beautiful because I have freckles on my beautiful brown skin.” I started to tear up when unconsciously I said words in which I don’t believe “ I am more than that number on that scale. I am worthy of love. Of receiving it. Of Giving it.” A voice that spoke words as if they didn’t come from me lovingly cascaded out of my mouth because I don’t believe them. But this was a gentle reminder or rather affirmation from deep within. A truth I push away because instead the lie that I am “fat” beats me over the head daily and rips me apart, tearing my self-esteem and any possibility of self-love away and out of my grip. So. I am more. I am more than the names that I was called thought elementary school and the nickname they gave me about my body. The name that the popular girls at the sleepovers branded me with at the parties I used to get invited to. I am more than the hurt that still haunts me from the boy that told me he’s “seen uglier” when I was 11 at a party in a hot tub when it was time to play “who would you date” I am more than the trauma that began when the boy who told me to “sit down Rilen, nobody wants to see your fat” when my pre-pubescent, lanky, tall 5’5, size 6 body rose from my desk and I outstretched my arms above my head to simply stretch and my favorite magenta shirt rolled up, betraying me by exposing my then, non-existent “muffin top. I am more than the permanent message that from that moment forward that my hips were bad, gross, disgusting and the eventual stretch marks that showed up in adulthood were wrong and something to humiliated about. I am more than that debilitating fear that forces me to wear leotards when I perform out of sheer terror that my shirt might fly up and my “fat stomach” and “hips” will fall out mid-performance, leading me to be self-conscious and unable to stay in the moment during a scene because that voice will scream at me how disgusting I am and how embarrassed I should be. I am more than the deleterious nickname my mom gave my breasts in high school that mocked the color of my skin and the shape of my body. Goddamnit, I am MORE than any mean word and slur that anyone believed they had the agency or permission to pass judgment about my childhood body and my body now in my adult years. I deserve nothing but respect and admiration for my body. For its shape, its color, the ripples on my thighs, the scars on my skin that I self- inflicted because I needed to feel something in moments of distress. The freckles that litter my face that seem to multiply every year, my 3 tattoos on my body inked in by a stinging needle with each holding deep meaning and representing a piece of my identity. My mind deserves to be respected for its intellect and capabilities. My gifts to express myself through word, song, and acting deserve acknowledgment, not my untoned arms and stomach. My mind needs to accept that I am everything I need to be at this moment. Would I like to lose weight to feel more confident in my body? Yes. Does that mean that because of weight loss I need to do in order to be healthier that was unfairly added to my body as a side effect of psychiatric meds to help with other aspects of my mental health that debilitate me equal me being gross, a failure and lazy because it hasn’t happened yet? Does that fear that freezes me from making changes cross my mind that even if I lose weight I will still hate myself as much as I do now? Undoubtedly. But when all is said and done, I am enough. I am all that I need to be. A number on a piece of glass with batteries and a number on a size of pants or shirt has absolutely no merit or any standing in who I am as a human. I am more. So, so much more.

Audience on Accountability Ecopetrol conducts this Accountability exercise voluntarily and in addition to the Shareholders General Assembly. This exercise is carried out in different regions of the country where Ecopetrol operates. During 2012, three regional audiences were held for a total of 19 in the last 8 years. The audiences are an important mechanism for dialogue with our stakeholders and represent a space where senior management can get close to the regions. Ecopetrol uses all available resources to guarantee the effective participation of all stakeholders present in the region. As a strategy to ensure attendance and guarantee maximum coverage, Ecopetrol uses various means of communication to make a direct and open invitation. Our stakeholders can participate in the audience in person at the location, or by multimedia streaming over the Internet. Adding the accountability sessions in the Shareholders General Assembly and the 2 regional public audiences held in 2012, there was a participation of 16.397 attendees, as follows:

-Rachel Carson Winter has arrived in full force this week. Winter came with blustery winds, arctic temperatures, and worst of all SNOW. I have lived in Michigan my whole life so I am no stranger to Winter. I remember the Blizzard of '78 (granted I was only 10). I remember school being closed for a week. I remember our dead end country road not getting plowed for three days. Those were the days when you needed to stock up on groceries before a true BIG storm, not when they predict a "storm" of 6" of snow. I mean Seriously! I remember donning my snowmobile suit and my snowmobile boots (the ones with the plastic bread bags inside to keep my feet dry) to go out and make a snow cave in the mounds from the snowplow. The problem with Winter is that last year and up until now this year, it has been fairly devoid of snow. Here is where the problem lies, I have grown quite comfortable with this Winter weather arrangement. I can still get outside most every day for our walks and can go exploring with my camera. At worst the skies are gray and I have to add another layer to keep the chill out. This week that all came to a screeching halt, blowing snow and below zero wind chills forced me to stay inside and make friends with the treadmill. If only I could find a way to get Scout on the treadmill, since he is my dog that MUST have at least one walk, preferably two, per day. We did venture out for brief 20 minute intervals during the worst of it. The things I do for that dog :) SELF-PORTRAITS OF THE WEEK Our theme for my 52 of You class this week was: Shadows Thankfully the sun did come out on Thursday, so I was able to find my shadow. Thanks to Scout for his help with the assignment. WEIGHT This week I lost: 1 lb. Total weight loss so far: 4.5 lbs EXERCISE This week I made friends with the treadmill. At least I have the t.v., or I rigged up a stand for my laptop so I can watch Kim Klassen's class videos. FOOD I made an awesome and healthy pasta salad this week. Tortellini Salad with Asparagus and Fresh Basil Vinaigrette 6 Tbsp. extra-virgin olive oil 1/2 cup chopped fresh basil 3 Tbsp. fresh lemon juice 1 shallot, minced 1 clove garlic, minced 1 pound asparagus, tough ends trimmed and sliced thin on the bias 2 (9-oz.) packages fresh cheese tortellini 1/4 cup pine nuts 1 pint grape tomatoes or cherry tomatoes, halved 1 oz. Parmesan cheese, grated (1/2 cup) 1. Whisk the olive oil, basil, lemon juice, shallot, garlic, 1/2 tsp salt, and 1/2 tsp pepper together in a bowl large enough to hold the pasta salad. 2. Cook the asparagus in 4 quarts boiling water seasoned with 1 Tablespoon salt until tender, about 3 minutes. Transfer the asparagus to a colander using a slotted spoon (do not discard the boiling water) and run under cold water until cool. Shake out any excess water and toss with the vinaigrette. 3. Return the water to boil, add the tortellini, and cook until tender, following the package instructions. Drain the tortellini thoroughly, then toss while hot with the asparagus and dressing. Refrigerate until chilled, about 30 minutes. 4. Toast the pine nuts in a small skillet over medium heat until golden and fragrant, about 5 minutes. Just before serving, stir the toasted pine nuts, tomatoes, and Parmesan into the salad and season with salt and pepper. To Make Ahead The salad can be prepared, covered, and refrigerated a day in advance. Before serving, freshen the salad with a spoonful of olive oil and a squeeze of lemon juice. Season with salt and pepper to taste. *Recipe source: dinnerideas.us Have a great week! Savor the Journey :)

Lamb of God’s New Album ‘Resolution’ Coming January 2012November 2, 2011 Lamb of God’s next album, Resolution, will drop in early 2012- specifically on January 23rd through Roadrunner Records. It will be 14 tracks long, and some of the songs on Resolution will be titled Invictus, Desolation and Guilty. Along with that, while on their 2012 tour, Lamb of God will be recording a movie documenting how their music helps people deal with the struggles they face daily. We are freaking pumped.

The Maynard Institute Announces 2018 Maynard 200 Fellows 26 Journalists, Producers, Managers, And Entrepreneurs Of Color To Receive Training As Part Of Pilot Maynard 200 Program OAKLAND, CA (July 23, 2018): The Robert C. Maynard Institute for Journalism Education, a nonprofit dedicated to making newsrooms look like America, announced today the recipients of its inaugural Maynard 200 Fellowship for training journalists, producers, management, and journalism entrepreneurs of color. Maynard 200 aims to expand the diversity pipeline in media by training 200 diverse storytellers in the next five years. The program is supported by Google News Lab, the News Integrity Initiative and the Craig Newmark Philanthropies, and is in partnership with USC Annenberg and the City University of New York [CUNY]. The pilot program of Maynard 200 will bring together 26 journalists in total for two weeks of training. Fellows will receive training in one of three tracks: Media Entrepreneurship, Newsroom/Media Management, and Storytelling. Fellows hail from a wide range of publications, including national publications The Filipino Channel and Sing Tao Daily—as well as freelance reporters. Regions represented include the Midwest, South, Pacific Northwest, West and East Coasts. Areas of focus include immigration, sports, politics, social justice, culture, and much more. “We are thrilled with the caliber of the applications we received,” said Maynard Institute co-executive director Martin G. Reynolds. “In fact, we were so impressed, and are so aware that our program serves a real, immediate need, that we decided to increase the pilot program to accommodate a group of 26 outstanding fellows, rather than 15, as initially planned.” “We’re pleased to be joined by an accomplished faculty to lead the program this week,” said Maynard Institute co-executive director Evelyn Hsu. “The faculty includes leading technologists from Google who will serve as trainers; top editors from newsrooms around the country and distinguished teachers from major universities. We are especially pleased that we will be joined by so many graduates of other Maynard programs through the years who have built successful careers with the help of Maynard Institute training and who are inspired to teach the next generation.” Odette Alcazaren-Keeley, Maynard 200 director stresses, “In sparking this movement of articulating the crucial role of inclusion in media, both the diverse heritage background and geographical representation of our fellows speak strongly to the Maynard 200 program’s vision of expanding the diversity pipeline in the field, and providing relevant training resources including to underserved media spaces.” She adds: “that includes ethnic media organizations, whose professionals, alongside journalists of color in general market media, are powerful voices that need to cover our shared American story, now more than ever. ” The Maynard Institute received close to 200 applications from across the U.S. Applications that were not selected for this first pilot will be will be re-reviewed and considered closely for the 2nd pilot, kicking off in Jan. 2019 at City University of New York. This year, first Pilot’s first week of training will take place from July 23-27 in Boulder, CO at Google at Boulder and the Hotel Boulderado Conference Center. The second week of the same cohort will take place from Dec. 10-14 at USC Annenberg in Los Angeles, California. “The fellows we selected for the training are dedicated professionals serving diverse audiences, and their work is all the more crucial in the midst of the nation’s fraught media climate,” adds Keeley. The 2018 Maynard 200 Fellows are as follows: Media Entrepreneurship Track: - Alex Bledsoe, Breaktide Productions (co-founder) - Kristen E. Jeffers, The Black Urbanist (editor-in-chief) - Samira Sadeque, Bangladeshi Identity Project (founding team member) - Giomar Silva, Migrante21 (founder) - Ingrid Wilgen, East Side Freelancer (editor) Newsroom/Media Management Track: - Rey Castillo, The Victoria (Texas) Advocate (assistant sports editor) - Cindy Chin, Newsday (deputy editor) - Janel Davis, The Atlanta Journal-Constitution (senior editor) - Troy Espera, ABS-CBN International – The Filipino Channel (executive producer) - Dani Marrero Hi, Neta (founder and director) - John Ketchum, SB Nation (deputy editor) - Wilson Liévano, Animated Press (founder) - Shauntel Lowe, New York Times (senior staff editor) - Christina M. Oriel, Asian Journal Media Group (managing editor) - Dalila-Johari Paul, CNN Digital (news editor) - Adrienne Mahsa Varkiani, ThinkProgress (senior editor) Storytelling Track: - Galilee Abdullah (producer and reporter) - Zirconia Sapphire Alleyne, Kentucky New Era Media Group (features editor/special projects coordinator) - Michael Butler (culture reporter) - Jonathan P. Higgins (social justice speaker and writer) - Esmy Jimenez, Northwest Public Broadcasting (reporter) - Chris Juhn (photojournalist) - Carlos Alfaro Rodriguez (sports & politics reporter) - Hanaa’ Tameez, Star-Telegram (diversity reporter) - Aldane Walters, KGPC 96.9 FM (Feel Alright producer & presenter) - Isabelle Yiu, The Sing Tao Daily SF Bureau (deputy assignment editor) The training program is run and informed by Maynard 200’s distinguished Executives-in-Residence, faculty, and consultants—a group with extensive experience in both mainstream and ethnic media news organizations as well as journalism/academic institutions, including: The Washington Post, ESPN, Seattle Times, ImpreMedia, The Dallas Morning News, The Poynter Institute, IndyStar, USAT Network’s Greenville News, USA Today, Tampa Bay Times, Boston University Dept. of Journalism, University of Colorado Boulder College of Media, Communication and Information, USC Annenberg School for Communication & Journalism, John S. Knight Fellowships at Stanford, The Trust Project at the Markkula Center for Applied Ethics, Texas Christian University, and more..

Windway House Windway House is a family run, modern home nestled along a quiet, tree-lined avenue in the heart of Killarney Town. Just three minutes from the bustling town centre, Windway House provides every comfort coupled with gracious hospitality. As well as offering advice and information on all of Killarney’s popular tourist attractions, your hosts, Frank and Mary Nolan will endeavour to provide for all your needs, and always with a smile! Windway House offers free broadband Internet and WIFI access to all guests, as well as secure off-street parking. Windway House received the Trip Advisor ‘Certificate of Excellence’ in both 2011 and 2012. The guestrooms at Windway House offer everything a guest could need while staying in Killarney. Double, Twin and Triple rooms are available. All Guestrooms Feature: - Complimentary Wi-Fi - TV - Hairdryer - Radio/alarm - Safety Deposit Box - Complimentary Toiletries - Complimentary Water Complimentary Tea, Coffee, Hot Chocolate and Soup sachets are provided in the Reading Room, which is open 24 hours a day. A refrigerator for guest use is located on the bedroom corridor, with an ample supply of ice and chilled bottled water. A computer for guest use is also located in this area. Windway House provides a sumptuous Full Irish Breakfast each morning, as well as a selection of delectable homemade treats..

Industrial Equipment & Plant Manufacturing Industrial equipment and plant manufacturing systems employ a wide variety of machines and techniques to automate the manufacture, assembly and packaging of products ranging from small items to larger assemblies such as cars. These wholesale industrial equipment implementations are often used for producing FMCG (fast moving consumer goods) including electrical and electronic products, cars, pharmaceuticals and food. The common aim is to maximise productivity and efficiency. Plant equipment includes conveyor belts, materials handling equipment such as forklifts and cranes, storage systems and warehousing fixtures along with process automation hardware such as robots. Alternatively, automated closed loop control systems have measuring and feedback to maintain output within specified ranges. Pallet systems and racking are used to organize storage of the finished products. If you would like to automate or optimise your manufacturing business or are an industrial equipment manufacturer seeking new customers, our online portal let you quickly identifie the right contacts you should consider meeting - buyers and sellers alike. Productpilot.com is the ultimate business marketing tool for a win-win outcome - a 24-hour worldwide presence for businesses to promote goods and services. Register now and gain full access to profile information and much more. In summary, modern industrial businesses require industrial equipment wholesale suppliers and manufacturers to help optimise and automate their key manufacturing processes. To achieve maximum productivity and profitability, manufacturing industries rely on their systems suppliers; service and support are fundamentally important to reduce down time. Productpilot.com helps companies find new business partners - if you are interested in organising a consultation, or are ready to go ahead with installing and commissioning new plant manufacturing or industrial equipment, we can help you locate the right contacts. Let productpilot.com put your business in touch with the right suppliers and customers, saving time and money. Search results Your search returned 5.442 results: Product 100% Cotton Flat, Fitted, Duvet Covers & Pillow Cases The Company Specializes in the sewing of flat, fitted, duvet covers and pillow cases... Company 3D Weaving is a family business (SME) specialized in the production of 3D woven... Product 100% environmentally friendly banding . For years, Bandall and specialist printing firm Max Aarts have successfully provided... Company Our Qualitätegarantie: 3tech stands for quality and attention to detail. Our... Product 100% environmentally friendly banding made of paper and PE-free hotmelt glue New: 100% environmentally friendly banding made of paper and PE-free hotmelt glue... 3T Supplies AG, Peach Division Peach office products is a Swiss brand known for low cost but highvalue products...

Policies The Cornell University Policy Office maintains a website with all university policies. This page provides policies and guidance related to the research enterprise. Inventions and Related Property Rights University Policy 1.5, Inventions and Related Property Rights, explains the principles and procedures by which inventions are disclosed to the University, how ownership of inventions is determined, how inventions are protected and commercialized, and how invention revenue is distributed. - The complete text of Policy 1.5 Inventions and Related Property Rights can be reviewed at: - Guidance on the policy is available at: inventions_guidance.html. - Download Sr. Vice Provost for Research Buhrman's memo regarding the policy - Download the HRIS Records Administration implementation memo - Download the Acknowledgement form for Weill Cornell Medical College - Download the Acknowledgement form for all other department/units of Cornell Postdoc Minimum Salaries Postdoctoral Associates Minimum Salaries. Outlines the University plan to increase postdoc salaries, effective January 2007. Principal Investigator Eligibility Policy Full-time members of the faculty may serve as principal investigators on sponsored programs. Individuals with certain other titles may serve, under special circumstances and with the approval of the Vice Provost for Research, as a principal investigator/project director. View the policy and application. Policies Specific to the Research Division The Research Division has developed several policies to aid in developing a diverse body of employees and students, to provide guidance on academic grievance procedures, and to assure the security of confidential university data. - Academic Grievance Procedure for Faculty and Academic Professional Staff in the Research Division - Comprehensive Diversity Plan for the Research Division - Confidentiality Agreement for the Research Division Office of the Vice Provost for Research 222 Day Hall Cornell University Ithaca, NY 14853 (607) 255-7200

Put Your Business On The Path To Success Using Some Effective Network Marketing Secrets Are you a new network marketing business owner that is trying to figure out how to achieve success with your business? It is imperative for all new business owners to learn the network marketing secrets that will get your business on the correct path to success. The following are the secrets that will allow you to easily achieve your goal of success over time with your mlm business. 1. Learn your business – When you have a business you have to take time to learn all you can about it. The more knowledgeable you are about it, the more this is going to be seen by others on the internet. This will help them see you as an expert and will make it easier for you to gain their trust. People want to begin a business of their own with an expert and a good leader and knowing your business is going to help others see you in this light over time. 2. Leadership and teamwork – Good leadership by you and teamwork by everyone on your team is also important for accomplishing success. You have to learn to master both over time so you can build a strong team that will earn money. The better you and your team are, the more business income everyone on the team will make, including you. 3. Advertising – As a new business owner, you have to realize that no one knows that your business exists. You have to be the one to spread the word about it to as many people as you possibly can. Advertising is the best way to achieve this and to begin building traffic to your network marketing business. Without new leads and traffic you will never achieve success so this is definitely the first thing you need to start doing right away. The sooner you start marketing, the sooner you will earn the money you want to be making with your new business. 4. Time, hard work and commitment – You have to be committed to building your business to success. You also need to be willing to work hard each day and give your business time to grow because these three things are essential for achieving your success goal. If you can’t do these three things, then you will always struggle to build a successful business. These are the secrets that will easily get your business on the correct path to success. You just need to be the person that does the hard work every day on your business using these network marketing secrets so you can make this dream your reality as soon as possible.. Tagged with: network marketing secrets Filed under: LeadershipBooks Like this post? Subscribe to my RSS feed and get loads more!

Ted Miller react differently to a "sprained" knee. Kidding! I'm kidding! And let's not forget RB LaMichael James. He sat out Saturday with a dislocated elbow. His return also is uncertain. (In a postgame chat with Kelly, without me asking, he said, "I think we'll get them back," which reflected the general scuttlebutt that disaster has been avoided with both Thomas and James). Considering how well Bryan Bennett played after replacing Thomas, there doesn't see to be much reason to rush Thomas (and James) back, particularly for Saturday's visit to a struggling, beaten up Colorado team, which may be without its best offensive and defensive players. After that, Washington State comes to town. Again, you'd think the Ducks could handle the better-but-not-there-yet Cougars without Thomas and James. Then things get tricky. Obviously, everybody is thinking about the Ducks' Nov. 12 visit to Stanford, which has long been considered the Pac-12 game of the year. But the Nov. 5 visit to No. 25 Washington also figures to demand the Ducks' full regard. That's the game Oregon fans would least like to lose on an annual basis. While most coaches don't think about injuries strategically -- if you're healthy, you play; if you aren't, you don't -- there is something to be said to priorities and playing it safe. Further, there's the issue of depth behind Bennett. That's true freshman Marcus Mariota and perhaps former QB Daryle Hawkins, now a receiver. Bennett at this point is a more effective runner than passer, but if he runs 15 times, that also exposes him to more contact, which is risky. The intrigue here will be writers who cover the Ducks trying to spy Thomas and James and read between the official lines of communication coming from Kelly, which will be a uniform "day-to-day." But the reality is that we almost certainly won't know when Thomas and James will resume their starting roles until just before game time. Originally posted by ESPN.com - Pac-10 Blog Click here to view the article.

Changes among the state secretaries Press release | Date: 2017-12-15 | Office of the Prime Minister| No: 130/17 In today’s session of the Council of State, the King has honourably discharged Mr. Elnar Remi Holmen as state secretary to Minister of Petroleum and Energy Terje Søviknes, as of 22 December 2017. The Government represents the Conservative Party (C) and the Progress Party (PrP). The state secretaries are: To Prime Minister Erna Solberg (C) Mr. Lars Øy . Rune Alstadsæ) Mr. Bjørnar Laabak (PrP) To Minister of Transport and Communications Ketil Solvik-Olsen (PrP) Mr. Anders Bjørnsen Werp (C) Mr. Tommy Skjervold (PrP) Mr. Knut Morten Johansen (PrP)) Ms. Maria Jahrmann Bjerke (C) Ms. Line Miriam Sandberg (PrP) To Minister of Foreign Affairs Ine Eriksen Søreide (C) Mr. Audun Halvorsen (C) Ms. Marianne Hagen (C) To Minister of Immigration and Integration Sylvi Listhaug (PrP) Mr.Vidar Brein-Karlsen (PrP) – Leave of absence 09.10.2017-07.09.2018 Mr. Fabian Stang (C) Mr. Torkil Åmland (PrP) – Acting 09.10.2017-07.09.2018 To Minister of Education and Research Torbjørn Røe Isaksen (C) Mr. Bjørn Haugstad (C) Mr. Magnus Thue (C) – Leave of absence 23.10.2017-14.01.2018 To Minister of Fisheries Per Sandberg (PrP) Mr. Roy Angelvik (PrP) Ms. Veronica Pedersen Åsheim Justice and Public Security Per-Willy Trudvang Amundsen (PrP) Mr. Thor Kleppen Sættem (C) Ms. Toril Charlotte Ulleberg Reynolds (PrP) – Maternity-leave 01.10.2017-07.09.2018 Ms. Anette Carnarius Elseth (PrP) Mr. Vidar Brein-Karlsen (PrP) - Acting 09.10.2017-07.09.2018 To Minister of EEA and EU Affairs Marit Berger Røsland (C) Mr. Jens Frølich Holte Holte (C)

On Wed, Jul 21, 2004 at 08:03:52AM -0300, Jean-Rene Cormier wrote:Is there a way I can create the certificate so I can connect to the server using different hostnames so I could use CNAMEs to make openldap.mydomain.com point to hostname.mydomain.com? yes, use subjectAltName. Works perfectly, I just tried it yesterday. You will need something like this in the usr_cert section in your openssl.cnf file if you are generating your own certificates: subjectAltName = DNS:server.company.com,IP:1.2.3.4 Just an example, of course. I guess wildcards are also allowed, but I haven't tried those. --Quanah -- Quanah Gibson-Mount Principal Software Developer ITSS/Shared Services Stanford University GnuPG Public Key:

Chic Svet Black/Black - £32.50 Cosamais/Cayenne - £30.25 Showing 1 to 3 of 3 (1 Pages) A versatile and stylish product which offers protection from extreme cold weather. Ideal for many outdoor activities such as mountaineering, skiing, snowboarding and hiking. Sign up to our newsletter for the latest updates, innovations and offers

Championship prediction for today games England, championship free football predictions and tips, statistics. Top tips and predictions ; Predictions for today (58 predictions for tomorrow (163 predictions for the weekend (267). In their last 17 games in Npl Queensland, SWQ Thunder have a poor record of 13 defeats. M - England, championship Predictions, Tips and, game, previews - Free England, championship. M - England Championship Predictions, Tips- Soccer live score, results, best odds. Insider in-advance information on new prospects will get the best potential and bring the most value, making the optimal.. Top trends, fi3, jippo Joensuu are on an unbeaten run of 16 games in their Kakkonen participation. Predictions tomorrow, predictions this weekend, predictions played today, tips Filter. Click on a past date above to view historical predictions and our success rates. IF Magni have managed just 1 wins in their last 10 league games, is2. Today s and Tonight s Free Football Predictions and Tips- Championship predictions become whole lot easier. Placing wagers on clubs that have managed to keep the structure of their squad intact is a solid choice in the early stages. When talking about the ultimate second-tier leagues in Europe, there is one that automatically comes to mind the English Championship. OK, language, computer generated football predictions (forebets) for the next round matches. Football Predictions Today Forebet Mathematical Free Tips- Here are all of our football betting tips for today and tonight. Match odds (1:X:2) are displayed. As extensive as it gets, the Championship consists of 24 teams 23 from England and 1 from Wales. Division games Ie2 Cabinteely FC are unbeaten in 12 of their last 14 First Division games Cn1 Hebei cffc's form hasn't been good, as the team has won only 2 of their last 14 matches (Super League). Is2, vikingur Olafsvik have failed to score a goal in 4 of their 6 most recent matches. If you want to see more of our football multiple tips, view them all in our dedicated multiple tips section. Soccer and Football Predictions and Tips For Games Played- Click any odds to add each selection to your bet slip and build your match winner accas. View our football tips with different odds and last 5 games records. The season runs annually from, august to the following May, and each side faces the other on two occasions, once as hosts and once as visitors, resulting in each team engaging in excruciating 46 outings in total. Africa Cup Of Nations, match Odds, o/U.5. WinDrawWin recommends m free football tips if you are looking for more football tips from another high quality football tipster. Away Win 0-1, tIP, large Stake On, draw 1-1, view Analysis, match odds. Football Predictions - Today s Match Prediction Site- Get the Most Accurate Football. Predictions Today, our site is the ideal place for all betting lovers who want to improve their sports gambling experience or diversify their sports betting strategies. Not only does olbg cover football but they also cover horse racing tips and other sports such as tennis, basketball and cricket, and run a free monthly tipster competition where you can win free bets and cash prizes. Nowhere else in the world are you to find fans as devoted and religious to their clubs as those from the. 5 Goals 5 Goals, predictions TodayPlayed TodayPredictions YesterdayPredictions TomorrowAll LeaguesPopular LeaguesEngland. Internationals, underOver, by using this site you agree with our use of cookies. Division of Vikingur Olafsvik Is2 Fjölnir have succeeded in keeping a clean sheet in their most recent. Is2, small, small Stake On, under, premier League. Over, vikingur Olafsvik are undefeated in 10 of their last 11 away league games. Overunder, check out our full list of weekend predictions match tips. Both teams to score tips, mORE, away Win. Division matches marks Nardo FKapos, hTFT tips, thor Akureyri have lost by 2 or more goals in 5 of their last 10 away league games. Overunder, afturelding have recorded a total of 6 losses. Both teams TO score odds, over, free mathematical football predictions and tips for today matches. The team of GZ Evergrande FC have achieved 7 straight wins in Super League 70 70 1X2 5 goals tips and correct score tips for today s and tonight s games Saturday July 6th. Predictions and Statistics, while the four teams below them compete in order to try and secure the third and the final promotional slot. In their last 8 games 5 goals odds, football Betting, there have been under 5 btts 1 X 44 both teams TO score odds more Large Draw 11 more detailed stats FOR this league Europa League Match Odds OU 5 Goals, is2. Click on a past date above to view historical predictions and our success rates. Is2, kashiwa Reysol have managed to win at both half time and full time Br1 Palmeiras are unbeaten in all. CupsRest of UK and IrelandMajor European LeaguesRest Of EuropeSouth and North StakesLarge StakeMedium StakeSmall StakeAll PredictionsHome Wins OnlyDraws OnlyAway Wins Only. Cn1 5 Goals, s league campaign Jp2 In all their last 3 matches of J2League 44 Under Is2 View Analysis 5 goals odds 2019 below 5 goals in 4 of the latest games Later on it was renamed into Division.. English second-best football competition. The Championship is the third most popular league in Europe by attendance, beating out both, serie A and, primera Division and is broadcasted in most sections of the world. It was founded way back in 1892 by the name of Division Two. Check out our full list of predictions (match tips, both teams to score tips, over.5 goals tips and correct score tips) for today's and tonight's games - Thursday July 11th, 2019 below. Btts 1, x 2, o U, y N, stake, prediction, tIP.. UMF Njardvik have lost all of their last 6 matches. Reset Filter, tips Display Format - Mobile Friendly. The website uses cookies. The first two teams topping the ladder gain automatic promotion into the. Football League One represents the final destination for the bottom three sides after the season ends. Is2, thor Akureyri achieved a run of 4 wins at HT/FT in their last 6 games. Jump To Today's Football Tips, featured Multiple Tip, check out this upcoming multiple tip.

Facing difficulty with downloading JEE Main 2022 admit card? Find out the reasons and solutions for the same here. Confused about your exam or college applications? Be the First to Know Get Access to Latest Updates Candidates who have registered for the exam paid the exam fee and made corrections in the application form (if any) can download their admit card as and when it is released. NTA will generate JEE Main 2022 admit card, which will have all the details such as candidate details, JEE Main exam centre details, date & shift timings of the exam and important instructions. There may be some cases where the candidates will not be able to download the JEE Main admit card, which is a big concern. In such cases, the candidates need to panic. Find out the reasons & solutions for this issue here. Reasons & Solutions for Issues with JEE Main 2022 Admit Card Download Here are some of the reasons because of why you will not be able to download the JEE Main 2022 admit card. You can find out the solutions for the same here. You can also contact the NTA on its helpline number 0120-6895200 if you still face issues with downloading admit card. Reason 1 – Server Issues This is one of the major reasons that will make candidates nervous while downloading the admit card. Once the admit card of JEE Main exam 2022 is out, there may be a lot of traffic on the official websites. Some candidates may not access the official website because of this. In some cases, the candidates may not see his/ her photograph on the admit card. Solution: Do not panic in such cases, and wait for the server to restore. You need to wait patiently to download the admit card. Reason 2 – Incomplete Application Form/ Wrong Details If your application form is found to be incomplete, the NTA will not issue admit card for JEE Main. Also, if you have filled in wrong details (indistinct or doubtful photographs), your admit card will not be generated. Solution: If your admit card is not generated by NTA, there is no solution for the same. It is always important to fill in the correct details in the application form. You can try applying for the next phase of JEE Main. Reason 3 – Eligibility Criteria Not Satisfied If you did not satisfy the eligibility criteria for JEE Main as specified by NTA, your admit card will be not issued. On the other hand, there is no solution for the same. You can also click on the link below for more details regarding discrepancies in JEE Main admit card – Also Read: For the latest JEE Main 2022 news, stay tuned to CollegeDekho. Similar Articles List of Documents Required for TS PGECET 2022 Counselling JoSAA Counselling 2022 - Date (Out), Registration (September 12), Choice Filling, Seat Allotment

! -- End Robin and Rabbit's edit --> 126317Regular price $324.99 Save $-324.99 run smoother and last longer. The side windows and rear window will completely zip out when needed for full ventilation. DOT approved first quality window materials are used. Fits over original factory OE hardware framework. Details: Cali Raised Offroad can install your vehicle goodies with professional clean factory look. Get great values and new item announcements Join Now Get Special Deals

Tuesday, June 17, 2008 Feeling better... Saturday, June 07, 2008 Do I really have to call him Master??? Thursday, June 05, 2008 Maybe I really AM falling apart... Now, for those of you who have ever considered a hysterectomy, I had a partial and for me it was pretty much a piece of cake. What I do NOT recommend is having an emergency appendectomy 12 days later. Seriously. Take my word for it and DO NOT DO THIS! It really screws up your life. The surgery itself wasn't so bad. Not a lot of pain involved, unless you count the horrible 3 day illness and 2 emergency room visits that preceded this surgery. What is does to a 37 year old woman's body - pure H-E-L-L. I'm telling you, I feel like I was hit by a bus then hit again. Wiped out. I thought I'd feel better each passing day, but unfortunately, speed doesn't seem to be a part of this particular recovery process. I went to the doctor yesterday... the follow up appointment to my 1st surgery. You know the appointment where I was supposed to be released to go back to work. HA! No going back to work for me. Four more weeks of recovery time is what he's suggested. Lovely. I'm doing my best to take it easy. I have a great group of family and friends who have pitched in lots of help. I guess for now I'm going to take a piece of my own advice and take care of me... I mean, honestly, I don't have very many removable body parts left! Wednesday, May 28, 2008 Another school year gone... Aren't they the cutest Koreans you've ever seen? The minute she walked in the door this afternoon, Miss Ava announced that she is now a 5th grader. Apparently this is a big deal. In her 9 year life, this is a huge deal. Like, GINORMOUS! She's growing up. FIFTH GRADE. She wants to pick her own clothes and do her own hair and talk on the phone with her friends. She doesn't want to be my baby girl anymore. I'm not sure I'm ready. Not that that matters. I promised myself on the day that she was born that I would always allow her to be her own person. I would guide her and hopefully lead her through a beautiful path, but I would not hinder her from learning her own life's lessons. That was an easy promise to make back when she was a helpless little crying creature in her bassinet. I've never broken a promise. At least not knowingly... This might be the hardest promise I've ever had to keep. Now Luke... he seems to care less that this school year has ended. It's like he doesn't even conceive that in August he will be in 1st grade in a brand new school. Nope. He's still my little boy. All I have to do is throw a football with him and I am the best mom ever. How easy is that? I wonder if that will still be all it takes for him to still think I'm awesome on his last day of 4th grade... Tuesday, May 27, 2008 When did this child learn to read??? Sunday, May 25, 2008 Slowly falling apart... Saturday, March 01, 2008 Writing Really IS Therapeutic! So why don't I do it more often??? Life gets in the way... Stupid answer. Life is what I like to write about. It helps me get things off my chest. I don't do it because I want the whole world to know what's going on. I just do it because I'm not good with whining and sometimes you just need to emotionally purge. I think this may be why I am where I am. It has been too long since I have allowed myself to let it out. Could that be why I feel like I've recently fallen in a manhole and no one knows I'm here??? Oh yeah. Absolutely!!! Even still, I don't think I'm ready to let it all out. Just yet. I still need time to analyze the crap out of it. See where I'm going with it. What the next step will bring. Then. Maybe. I will have a good emotional vomit. Until then. I'll just keep writing in my head.

Thank you for considering an application to operate a newsstand in New York City. JCDecaux Street Furniture New York, LLC ("JCDecaux") is New York City's street furniture franchisee through a contract it holds with the New York City Department of Transportation ("NYC DOT"). It is the company that fabricates, installs and owns the newsstands in which licensed operators conduct their business. The following is information regarding details about the newsstands:

Shoppinsight Reviews Product Review Categories All Products Dozens of Real Product Reviews in Dozens of Categories Affiliate Marketing Success Products To Help Start Your Adventure These are not "Get Rich Quick" schemes. They will require effort and an investment of time and money to work. Though they are proven to be effective Reviewed and Recommended Products Affilorama Affiliate Marketing Product Review Clickbank University Review Kartel High Ticket Affiliate Marketing System Rapid Profit System The Commission Machine Review

The Labrador Retriever is a well behaved dog that is great for children and elderly companionship. Besides being very playful and having a very athletic body, they provide very good assistance. There are many dogs from this breed that are specially trained to take care of autistic and blind people, to perform detection work for many official agencies or to act as therapy dogs. Therefore, the Retriever is one of the most popular breeds in the U.S.A., New Zeeland, Australia, Canada and the United Kingdom. The smell of a Labrador Retriever is so developed that it allows it to sense almost any scent and to trace it back to its origin. This is why many military forces decide to train and use them when they encounter a ‘smelly problem’ such as: drugs, presumed terrorist or thief, smugglers and people who sell counterfeit merchandise. Also, the Labrador retriever can carry any object without breaking or damaging it. Because they are athletic and fast, they are also good for field work, but you should be careful because there may be moments when a Retriever may get out of control. They reach maturity at the age of three, that is why, until then, they are in a continuous state of play and even though you may think that they can be easily handled, you are wrong. It is recommended that they should be leash-trained from puppyhood, so that you will not have any unpleasant surprises further on. They are not territorial or nosy dogs, but there may be some times in which they will start to bark or to run without a strong reason. Also, because they are very easy going with almost everyone, even strangers, they are not suitable for being guard dogs. The Labrador Retriever’s appetite is a very strange one: they can eat almost anything without having any problems – there were some cases in which dogs from this breed ate not only digestible food, but non-food objects also. If you have a Labrador Retriever and you want to avoid having health problems or to become obese, you should be very careful with its food; two or three regular meals a day are enough in order to temper its hunger. This breed is more intelligent than any others, so, even though they do not climb/jump high fences or dig, they can be trained to do these tasks if the owner wants so. The most important part is to draw their attention and to teach them how to focus and, after some months of patience and training, they will be able to easily do the things you trained them for. Because of the curiosity that this dog breed has, many Labradors end up separated from their owners: either they get lost in the crowds or they are stolen. To avoid this to happen, their owners should put a collar on them that should contain the dog’s name, the owner’s name, the address where the owner can be found and a telephone number. Also, those who have the necessary budget should take the dog to a veterinary and microchip it; this way, the owner will know how to find his/her Labrador Retriever if it is lost.

good, when needed, i prefer using ctest units, instead of debugging Debugged my C++11 code first time I have often use this tool. This is my favorite tool! Great support across IDEs like Geany and Code::Blocks. If you use debuggers, this is a must have. I am a developer. I think LMDE should make developers' job easier and provide either gdb by default, either pre-defining a "developer profile" that will configure the system accordingly. Command line debugger and, as such, rather difficult to use. However, it does its job perfectly

Senior Business Travel Consultant - Galileo - London - Recruiter - New Frontiers - Location - London - Salary - £30k - 35k per year + bonus & bens - Posted - 19 Jun 2018 - Closes - 17 Jul 2018 - Ref - VV23193 - Vinesh Vijayananthan - Sector - Business Travel - Job function - Fares & Ticketing!

Maybe you forgot your username or password? Your username and password here will also work on DesignsBySiCK.com 26 Designs All Fit the 4x4 Hoop See the set Just in time for Halloween. Very cute. There are currently 1 users browsing this thread. (0 members and 1 guests) Forum Rules Bookmarks

With March, we will begin to see warmer days and calm waters in the 10,000 Islands area. It is also when the seasons begin to turn, and spring is on its way leaving the cold and harsh conditions of the previous two months in the past. Spring fishing season is finally here! While the weather definitely does get warmer in […] Follow the Fish March Fishing Forecast in the 10,000 IslandsFollow the Fish Category Pages are limited to 365 days. Please use the archive page or the search box to find older articles.

This sketch of a firetruck was created as cover art for a booklet titled "After The Fire... A Time of Decision." The booklet was intended as a guide for recent fire victims and was created by Tina Littell and myself for the West County Fire Chief's Association. The booklet was published by the Albion News in 1987.

Chaya and Chani Went: The New Jewish Entertainment and Combining Timeless with Time Limit At last! The long awaited email arrived, “Launching Softly”. The title alerted me to its exciting contents. One Before Escape, a Jewish Escape Room in the heart of Brooklyn, had opened. Escape rooms have been spreading rapidly across the globe, growing in the thousands. Now it has finally crossed over into the Jewish sector too. An escape room is an interactive physical game. A group of players get locked in a room with a theme, a guiding story, and have to solve a series of puzzles and riddles in order to escape. The players have a time limit, usually 60 minutes, to escape. I had only gone to one escape room before and I really enjoyed it, although we only escaped in time due to the overflowing hints the escape master had generously graced us with. So I had some idea of what I was getting into when I arranged with my friend to try the Shpola escape room at OneBefore Escape. The day of the game arrived and I came there first. Mr. Beyderman, founder and owner of OneBefore, directed me to stroll through the premises to the art gallery. Paintings escorted me on both sides through the hallway to the party room where even more beauty hung in wait. The paintings were practically jumping out of their frames, each one eagerly telling its story of the Tzaddik. Once my friend arrived and we were all ready, Mr. Beyderman lead us into the first part of the Shpola Room, and explained to us its story. It is based on the genealogical journey of Dr. Jeffrey Mark Paull. In his quest to discover his family tree, he found an incredibly rich history of ancestors made of leading Torah scholars, tzaddikim, and even royalty. One of the noble ancestors he found in his ancestry line is the Shpoler Zeide, who is featured in the Shpola Room. The Shpoler Zeide was an early Chassidic master, renowned for his love of his fellow Jews. He would rush to defend them from bitter enemies, and stand up for them before Heavenly judgment. Mr. Beyderman finished off with telling us what our objectives were in the first room of the game. Our game began and we got cracking. The 60 minute countdown quietly appeared on a screen placed high on the wall. My friend and I took in our surroundings; ancient suitcases piled haphazardly one atop the other, a desk resting snug in the far corner, a cupboard stocked with venerable books. These items, as well as others, had been pointed out to us and we rushed to start. We scrambled to make sense on the clues and puzzles, and slowly but surely made some headway. At one point we sat stuck at a loss and begrudgingly asked for a hint. The hint charmingly appeared typed out on the screen with the countdown timer. Yikes! Less than half of our allotted time was left. We redoubled our efforts and soon enough finished up the last puzzle. The door unlocked with a squeak. Vaiter - Onward! Not to our escape as our shrinking egos were hoping for. We were ecstatic though, and sped around trying to figure what to do next. The second room felt like stepping into another dimension with antique looking items and prominent wooden furniture, combined with puzzles made of modern technology. Try hard as we could, (and with more hints, shhh!), the time ran out before we could escape. Mr. Beyderman joined us in the room and explained to us the puzzles we hadn't finished. The style of the puzzles, although an unusual characteristic to mention, had been brewing in my mind. It really stood out as Mr. Beyderman was filling us in on what had remained unsolved. In the first escape room I had gone to, the puzzles, although mentally stimulating, were not especially creative. They were what you would expect in a mystery, such as fitting books in a bookcase to unlock a door. In the Shpoler Room, the type and style of puzzles were a refreshing splash of creativity that got our minds tingling. In fact, the entire idea of creating escape rooms around stories of Tzaddikim is an exciting new development in authentic Jewish entertainment. I say values and eternal Torah values, is not quite as abundant. In fact, we are left lacking, apart from the occasional Jewish concert and high school production. An escape room that imparts Jewish stories and virtues is hopefully just the beginning of a new era in Jewish entertainment! There is a saying from the Baal Shem Tov, “Bemakom shemachshavto shel adam, sham hu nimtza.” - “Where a person's thoughts are, that's where he is.” What better place is there to be than in the life of a Tzaddik? In the Shpola Room our minds became completely immersed in trying to put together Dr. Paull’s lineage, leading us into the life of his ancestor, the well-known Tzaddik, the Shpoler Zeide. We were led into the world of a favored childhood story and into the origins of a popular lively Niggun - song. My friend and I walked out of there charged and excited and didn’t want to part ways just yet. However, with the dreary whether, chatting on a bench was not too appealing. We were pumped that One Before Escape is in the heart of a thriving Jewish community, so we had no issue finding a place to pop in for a drink or a bite. We took refuge in the Ice Cream House just a block away, enjoying the last few daylight hours. It is not very hard to guess that we plan on coming back for their next room! Follow in Chani's footsteps by booking your experience here! Chaya and Chani Went: 7 Torah Insights Escape Room Teaches Recently I went out of my way to get locked in a room. Yep locked, and handcuffed too. This wasn't the case of Stockholm Syndrome, or a bout of lunacy. For the first time in my life I went to experience an escape room. This was not the Jewish Escape Room we are all waiting for - as you will see from the distinctly goyishe props. An escape room is a team-based physical adventure game in which the players get locked in a room, and have to solve a series of puzzles and riddles to escape using clues and hints. The players must escape before the set time limit is up. My experience was delightfully entertaining from a player's perspective, and quite thought-provoking from a Jewish one. “Our teacher the Ba’al Shem Tov said: Every single thing one sees or hears is an instruction for his conduct in the service of G-D. This is the idea of Avoda, service, to comprehend and discern in all things a way in which to serve G-d.” Hayom Yom, Iyar 9 It all started by walking up the narrow staircase to the lobby of Epic Escape Rooms Brooklyn with my lovely sister Chani, where we were warmly greeted by the game master. He sat us down and told us about the game. We were to be separated into two adjoining rooms and handcuffed, with walkie-talkies to communicate, and our goal was to work together to escape. He took us one at a time and set us up. 1 I walked into the room I was to start in and took in the details; the rusty tub awash with blood, tufts of dust smothering the toilet in the far corner, messages scrawled across the walls made ever-more grizzly in the dim lighting. I could have spent at least half the allotted time exploring all the gory details of the room. Fortunately, I was aware of my goal and knew that in order to achieve it I had to focus on what will help me. This turned out to be my first lesson. In the words of Shakespeare, “All the world's a stage, and all the men and women merely players.” (Well in this case, all the worlds an escape room.) Each of us are in this world for a reason, to achieve personal and collective goals. Yet surrounding us are the most elaborate, entrancing diversions that can seriously distract us, unless we know what our goals are and focus on achieving them. 2 After being all set in the room and officially starting, I began to familiarize myself with every nook and cranny. I realized that everything there had a purpose. Some things were there to help solve puzzles, and others were there to create the perfect background and ambiance. If this was the case in human designed escape room, how much more so in the world designed by G-D is everything for a reason! 3 Our first job was to unlock the handcuffs. I had the keypad and Chani had the code. Communicating through our walkie talkies and after many failed attempts we finally figured out the code. Once I punched it into the keypad the keys to the handcuffs flew out of the ceiling, eliciting a very high-pitched shriek (from one of us). Chani and I started off in two separate rooms, but we were each dependent on the other to solve the puzzles in our individual rooms and to eventually completely escape. This idea is mirrored in our lives. We are all responsible to do our job in this world so that we can bring the Geula, Redemption. We must do our part, and yet we are also dependent on everyone else to do theirs. It is by acting in unity and helping each other that we can achieve our goal. 4 Chani and I were not the only ones with walkie talkies, the game master had one too. From the very beginning to the very end of the game, the game master gave us our hints this way. If not for those hints, we would still be there now, but with dead walkie talkies not knowing where to turn. Isn’t this similar to Torah in our lives? The Torah is our game master, hinting to us what to do and where to go. Without the Torah’s directives we would be stumbling around and lost in the big wide world, not knowing how to get to where we need to be. 5 At last breaking out of our original rooms, we had to get through a third room. Desperately searching high and low for clues, we were acutely aware that our time was running out. Fortunately the game master had pity on us and told us that we had both left clues in our original rooms. Rushing, or rather crawling back, we found what we needed for the puzzle. When we were in our rooms initially, these clues seemed like innocent props with no other agenda. Only later on did we come to appreciate their true meaning and purpose. This is something that happens to us all. We see things, experience things that we don't understand the reason for. Only later on, be it days or years, do we come to understand the reason for what we saw, heard, or experienced. In essence, this is an experience of Divine Providence. G-D directs every detail in our personal lives and in the world at large, so even if we cannot immediately see a reason for everything, we can trust that it is there. 6 As we neared the end, our last puzzle was to figure out the code that would unlock the door of the escape room. We had the numbers for the code, but the order was concealed among the words of a note. We had to search for the deeper meaning behind those words, for the secret hidden within them, in order to escape. This instantly made me think of a story of the Ba’al Shem Tov. The story was originally written in Ben Porat Yosef, by Rabbi Yaakov of Polonye. In the story the Ba’al Shem Tov’s soul ascends to the chamber of Moshiach, and asks when he will come. Moshiach answers, “... In the time when your teachings will become public and revealed in the world…” The Ba’al Shem Tov’s teachings are Chassidus, the secrets of our Holy Torah. It is through delving into Torah secrets that we will escape from our exile. 7 When we first started, Chani and I were hesitant, as an hour sounded like quite a bit of time. Next thing we knew the game master was calling out, “You guys have twelve minutes left”. We froze awkwardly in our places, then scrambled to make the most out of the last few minutes.That small shock signified something far larger. We are endowed with a certain amount of time to live our lives. It is up to us to make sure we utilize every moment toward fulfilling what G-D put us in this world for. These are just some thoughts that accompanied my experience. Please share yours! Unlike the experience of Chani and Chaya, OneBefore offers all the thrill in a truly Torah atmosphere. We worked hard to design the experience to be Jewishly inspiring and educational. Please book to check it out!

/> Makies are dolls created by you! Design your doll's face shape, features and colour, choose the eyes, hair and clothes, and when you press MAKE REAL, MakieLab turns your design into a real-life doll! From your iPad screen to your home in less than three weeks. Just like magic! Makies are the world's first 3D printed toys, produced in London and safe for children aged 3 and up. They inspire kids to play and create, using their imagination to build characters of their own. With the help of a clued up parent, the dolls can even be fitted with LEDs, RFIDs, battery packs, voicechips, Bluetooth and Arduino, and programmed to do really cool stuff! Each Makie is completely unique, made on demand, and comes complete with a numbered Certificate of Creation. Personal, sustainable, and completely modern, Makie dolls are truly special toys to treasure for a lifetime. The world's most famous online retailer sells an unparalleled selection of toys. How would you describe this product? Please tell us what you think of the Makies Gift Box. 2 people have reviewed this product: Average score: Comment by Margaret, 17th December 2015 Magical and perfect for my neice to learn and express herself herself with these beautiful dolls for a lifetime of enjoyment Comment by Amy, 18th September 2013 The whole experience, from creating my Makie, to delivery, has been nothing but enjoyable. The staff keep you up to date on your Makies' progress. The app is easy and enjoyable to use, and FREE! I have spent countless hours just creating and having fun.

NEWS 27 Feb. 2019 RM Terex Took Part in Building Poligon Park 07 Feb. 2019 RM Terex Engineers New Machines – Snow Groomers 18 Jan. 2019 RM-Terex Еnters the African market 18 Dec. 2018 RM-Terex supplied 15 motor graders to Bryansk Region’s road departments 11 Dec. 2018 Deputy Mayor of Vladivostok and Mayor of Bryansk Visited Bryanskiy Arsenal Plant 30 Nov. 2018 RM Terex Supported the Young Artists Festival 01 Nov. 2018 RM-Terex is tapping into the Uzbekistan market 30 Oct. 2018 RM-Terex opened two new dealership centers in the Urals 18 Oct. 2018

As one of doTERRA’s most popular oils, doTERRA On Guard is a powerful proprietary blend that supports healthy immune function* and contains cleansing properties. If You are NOT using OnGuard… What’s taking you so long?!? for OnGuard Essential Oil: 1. Add two to three drops in a veggie capsule for an immune boost.* 2. Add to water for an effective all-purpose surface cleaner. 3. Soak sliced apples in water and a few drops for a healthy, immune-boosting snack.* 4. Combine a few drops of doTERRA On Guard with Fractionated Coconut Oil for a natural hand cleanser. To order your OnGuard today at wholesale prices, CLICK HERE.

Kickstarting a cult classic: Can fan love bring back 'ToeJam and Earl'? /2015%2F03%2F24%2F61%2FMash.e8680.jpg) Creators — and their fans — almost take the Internet for granted at this point. Social media and instant communication can lead to a never-ending feedback loop; see something you love, and immediately send praise out into the ether. But in 1991, when games were released on cartridges and players could only buy them at brick-and-mortar stores, creators would rarely know exactly how fans felt about their games. "You feel very isolated when you make a game," veteran game developer Greg Johnson said. "Its actually really anti-climactic when you release a game out into the world, and then it's silent. You get to read a few reviews, and if you're lucky they are saying nice things. But you really don't have much of a sense of the thousands, or the hundreds of thousands, of people playing it in their homes and what they think." For Johnson, a game like ToeJam and Earl — a 1991 Sega Genesis title about two funky aliens trapped on Earth — existed in that pre-internet vacuum. But he said plans to announce a spiritual recreation of the original title, followed by a Kickstarter campaign, turned fan support into a flood. As Johnson and I sit in his sunny office in Humanature Studios, a converted home in Albany, California, he begins to recount the outpouring of fan interest and creativity he's received since making the project live in late February. Fans have sent him remixes of the music, papercraft creations of the titular characters and lots of letters of how the original ToeJam and Earl was a defining gaming experience for them. The letters range in who fans shared the game with; its design allowed two players to easily share one screen with its split-screen multiplayer. Johnson said he's heard from best friends, siblings and even children who played with their since-passed parents. "Sometimes you just think 'Gosh, I just made a video game,' but I get a little teary reading these emails from people." Johnson said. "This has been a real eye-opener. If that many people still know it and want it, then I think this was the right path to choose." Johnson said he was forewarned that Kickstarter could be a full-time job, but the volume of messages can be, at times, overwhelming. Even if he's grateful for almost every one. "My wife keeps telling me I have to stop. I'll be there at 1 a.m. and she's like, 'You need to go to bed.' There's a lot of questions that are easy to answer, so I just figure 'Oh, just one more.'" The proof of this involvement is easy to find online. The ToeJam and Earl Facebook page is extremely active with Johnson's posts, but also comments on most of the fan replies, questions and feedback. Even the nasty stuff. "You just have to realize where people are coming from. They aren't bad people; they just have their opinions. Sometimes I respond to them if some element of what they are saying is reasonable, but I'll just respond to that part," said Johnson Risks and challenges The game's appearance on Kickstarter initially delighted a lot of fans. But Johnson realizes not everyone was happy with the game's look, which was very much still a prototype. The 2D characters didn't blend in well with the 3D backgrounds. "One of the things with Kickstarter that can be a little frustrating is you make the connection with all those people, you get everyone all excited and then they want the game now," he said. "I would have liked to stay under the radar much longer and actually build the game or get most of the way through it and say, "Yup, it will be ready in just four months!" He called the whole process a Catch-22, saying the team of four had to create something that looked enough like a game for the Kickstarter video, but wouldn't actually be playable if you placed it in front of someone. Johnson's approach to creating media for Kickstarter also leaned far more heavily away from the hard sell, and instead showed him just having fun for fans' benefit. Many of his accompanying videos were strange, like one where he and other famous game designers like Will Wright and Tim Schafer pretended they were aliens — complete with dubbed-over voices. From the comments, viewers either loved it or they hated it. Johnson made a few other similar choices in his campaign that felt more about having fun than bringing in investors. He narrated his first pitch video almost entirely in a Scottish accent; he's an American. That video was reshot later with his real voice throughout. But that joy is also what made ToeJam and Earl succeed before. Along with development, Johnson is responsible for helping pen the funky music made iconic by the first games, much of which involved singing each part into a tape recorder. (Or now, a smartphone.) "A big part of why ToeJam and Earl exists at all because I love that music so much," he said. "For many songs, I'd sing the bass line, the melody, the drums and the lyrics, then turn it over to my friend Burke Trieschmann." That same method helped spawn a brand new theme song that fit Back in the Groove, with a music video that mixed live-action shots of the ToeJam and Earl's voice actors — Tonez the Prince and Greg Jones — with animation. Managing fan expectations Kickstarters now have even more fan expectations to manage. Larger campaigns are sometimes still failing to produce a product even after raising large sums of backer money. "That's the thing with Kickstarter; there are so many people who want big promises, but they don't want you to break them," Johnson said. As Back in the Groove has only been promised for PC, Mac and Linux platforms, most of the requests for stretch goals — a term for for an amount of money raised beyond the project's base — included ports to consoles. He's offering staggered goals for the PS4, then Xbox One, then finally Wii U. The Kickstarter's funding slowed down significantly after its initial burst. While it looks like the campaign might reach its $400,000 goal by Thursday's deadline, the campaign was stalling for days a little over $200,000. Johnson said it was also hard to resist the urge to check in all the time. "Running a Kickstarter campaign is really a marathon. You have a one-month window of opportunity to get the word out to people and to answer everyone’s questions in a way that’s clear and appealing. You constantly feel like you’re missing something important, or not doing something right," he said. But beyond that stress, Johnson seems most rewarded not by the promise of money, but by making the connections to so many people. "When you’re in the position we’re in, like so many Kickstarters, when you start getting close to the end and you haven’t met your goal yet, it gets a bit nerve wracking," he said. "But it’s exhilarating to be exposed to so much positive feedback, and to make so many new friends so quickly."

This article is only available in the PDF format. Download the PDF to view the article, as well as its associated figures and tables. Life school Medical News. JAMA. 1974;230(6):803–816. doi:10.1001/jama.1974.03240060003001 © 2018 Customize your JAMA Network experience by selecting one or more topics from the list below.

Steve Cave is an associate in the Government Contracts Practice, resident in the firm’s Northern Virginia office. Mr. Cave advises and counsels clients on a range of issues, including disputes and bid protests before the U.S. Government Accountability Office and the U.S. Court of Federal Claims. Mr. Cave has significant experience related to corporate mergers and acquisitions involving government contractors. He also works with clients to ensure compliance with applicable laws and regulations and to conduct internal investigations into potential violations of such laws and regulations. Prior to joining Morrison & Foerster, Mr. Cave was an associate in the government contracts practice at a national business law firm. Steve earned a B.A. magna cum laude at Virginia Polytechnic Institute and State University and a J.D. cum laude from the George Mason University School of Law where he served on the editorial board.

How to get free Steam key Dear friends, we are starting a new cool giveaway! Today we will give away 10000 Steam keys of "Countryballs: Over The World"! Complete some easy tasks on Steam and grab the key for free! You need to log in with your Steam account to continue.sign in through Steam

Via Joho, the touchingly beautiful Bush and Blair video. Aw, innit sweet? (It's also huge – takes ages to load on dial-up, but I think you'll agree it's worth it.) SWALK: Bush and Blair Previous post: Welcome to Dehinc, where there are no posts for ages, then three come at once Next post: Amazon can't count *sniff* Invading a Country For False Reasons Means Never Having To Say You're Sorry 🙂 Visit me @ I do beg your pardon? Never having to say you're what? Sor… Suh… er… Sir… Surrey? I'm afraid that word's just not in our dictionary. The one person I've ever known personally from Wales it wasn't in HIS vocabulary either. 😛 -JM Josh That's cos he was Welsh and they say 'mae'n ddrwg gen i' instead. 😉 Although I have noticed many men don't have the word (or any words expressing the sentiment) 'sorry' in their vocabulary at all. I suspect it's a gender thing. I'm the exact opposite, actually. I have literally caught myself saying “I'm sorry for apologizing” more than once in my lifetime. I think it's that I take too much weight for things I can't control sometimes. Visit me @

Pile by Pile Confession: I am a huge pile-maker. I don’t make huge piles. I just make them over and over. I clean them up, and I make them again in the same spot. They mainly take over two places: my desk, and the space next to my bed. Well, plus the bookshelf above my desk. But that’s going to take a whole day of devotion. Because then I’d have to also go into how I save EVERYTHING from my classes. Which I proceed to NEVER look at again. Until I throw it away. Gah. Knowing that I have to pack up my room next week means that these piles need to be gone. They consist of pretty useless stuff, so this isn’t a big problem. However, I have to look at everything before I throw it away, because the theory here is that I saved these things for a reason. “Theory” being the key word in that sentence. Why do I have the syllabus from last semester’s class? Why do I have grocery receipts from February? Why do I have notes from my Elective sophomore year?! This could go on for a while…. Tonight I cleared off my desk and nightstand. Tomorrow I might move up to the bookshelf, but that is a daunting thought. Maybe I should study for that last final instead? Ehhhh, I’ll take the non-existent option 3 please. I did finally put away the laundry I did on Friday. We’re making progress. I feel you on the piles. When I actually find time to organize things, I find myself saying “why the hell did I think I needed to save THAT?!” Comment by Sassy — May 6, 2008 @ 12:12 pm

This article I will show you a step-by-step tutorial of how to clean install Windows 10 Enterprise with local account on your computer. This article will focus on the installation of Windows 10 Enterprise on Hyper-V's Virtual Machine. Windows Client & Server, Software, Download, Cloud and Virtualization Technology Download Windows 10 Enterprise (90-day evaluation) Windows 10 Enterprise evaluation is available as a free download for developers and IT professionals. This evaluation provides a 90-days evaluation of Windows 10 Enterprise edition. Both 32-bit and 64-bit versions are available as ISO images in the following languages: English (United States), English (Great Britain), Chinese (Simplified), Chinese (Traditional), French, German, Italian, Japanese, Korean, Spanish and Portuguese (Brazil) CCleaner 5.08.5308 for Windows is now available for download Periform has released CCleaner 5.08.5308 for Windows. CCleaner now officially supports Windows 10 RTM build (10240) along with improving cleaning for Microsoft Edge. For Professional users, Browser Monitoring is now includes compatibility with Edge. It also contains a number of improvements and bug fixes. WordPress 4.2.3 is now available Chrome 44 Final: Improvements to Notifications API and promoted add to homescreen Google has released Chrome 44.0.2403.89 to the Stable channel for Windows, Mac and Linux. Chrome 44 final release includes new ES6 features and a number of updates to existing APIs. This release also includes 43 security fixes. Windows Sysinternals Suite (July 20, 2015) Microsoft has released an update version (July 20, 2015) of Windows Sysinternals Suite. This new release contains an updated version of Sysmon v3.1, LogonSessions v1.3 and VMMap v3.21. A Guide to Using Windows 10 Client Hyper-V Microsoft has released the guide to Using Windows 10 Client Hyper-V. This guide contains 7 topics: Practical applications for Client Hyper-V, Hardware requirements, Enabling Client Hyper-V, Tools, What is not included in Client Hyper-V, Limitations of Client Hyper-V and For more information. A Guide to Creating a Portable Windows 10 Environment with Windows To Go Microsoft has released the guide to Creating a Portable Windows 10 Environment with Windows To Go. This guide shows you how to create a Windows To Go workspace. This 9 pages guide is available in MS Word (.docx) format only. Microsoft Security Release ISO Image July 2015 is now available for download Google Chrome 43.0.2357.134 [Update] Google has released Google Chrome 43.0.2357.134 to the Stable channel for Windows, Mac and Linux. This update contains a critical update to Flash Player (18.0.0.209) and a fix for a full screen casting issue. Adobe Reader XI (11.0.12) is now available for download Adobe has released updates for Adobe Reader XI (11.0.12) for Windows and Mac, and Adobe Reader X (10.1.15) for Windows and Mac. These updates address multiple critical-risk vulnerabilities that could cause a crash and potentially allow an attacker to take over the affected system. Adobe Flash Player 18.0.0.209 is now available for download Adobe has released Flash Player 18.0.0.209 for Windows and Macintosh, and Flash Player 11.2.202.481 for Linux. These updates address a couple of critical-risk vulnerabilities that could potentially allow an attacker to take control of the affected system. Download Microsoft Windows Malicious Software Removal Tool 5.26 Dropbox 3.6.9 Now Available for Download Dropbox has released a final version 3.6.9 of Dropbox, a final build of its desktop client for Windows, Mac and Linux. This stable release includes: - Initial Windows 10 support. - [Linux] Fixes an install issue in the nautilus-dropbox package in Debian and Ubuntu. FileZilla 3.12.0.2 is now available for download FileZilla.org has just released the FileZilla 3.12.0.2. The following bug was fixed in FileZilla 3.12.0.2: - Regression on servers that have MLSD facts disabled by default. Oracle VM VirtualBox 5.0 Final now available for download Oracle has released the final version of VirtualBox 5.0 (5.0.0 Build 101573) for Windows, Mac, Linux and Solaris. This version contains significant improvements, with a large number of enhancement and bug fixes. Adobe Flash Player 18.0.0.203 Now Available For Download Adobe has released Flash Player 18.0.0.203 for Windows and Macintosh, and Flash Player 11.2.202.481 for Linux. These updates address a critical vulnerability that could potentially allow an attacker to take control of the affected system. Windows 10 Insider Preview Build 10162 ISOs Now Available For Download Microsoft has made available Windows 10 Insider Preview build 10162 for Fast ring testers on 2 July 2015. It has now made build 10162 available as an ISO download. But this build doesn’t available to those on the Slow ring testers. iTunes 12.2 Now Available for Download iTunes 12.2 is now available for both Windows and Mac. This update adds Apple Music support. In addition, this update also comes with new icon. EaseUS Todo Backup Free 8.5 Now Available for Download EaseUS has released version 8.5 of EaseUS Todo Backup Free edition. This stable release include: - Highly efficient 64 bit WinPE bootable disk keeps your data safe in any case. - Work with Central Management Console seamlessly to improve the efficiency of enterprise users. - Increase the success probability of system recovery, universal restore and system clone on GPT drive. - Windows 10 Compatible. Easeus Data Recovery Wizard Free 9.0 Now Available for Download EaseUS has released Easeus Data Recovery Wizard Free Edition 9.0. There release added support for recovering from Mac OS file system HFS+ under Windows. It also added more file types supported for RAW recovery.

Podgorny, Nikolay - ▪ Soviet statesmanborn Feb. 5 [Feb. 18, New Style], 1903, Karlovka, Ukraine, Russian Empiredied Jan. (Brezhnev, Leonid Ilich),. * * * Universalium. 2010. Look at other dictionaries: Podgorny, Nikolay (Viktorovich) — born Feb. 18, 1903, Karlovka, Ukraine, Russian Empire died Jan. 12, 1983, Moscow, Russia, U.S.S.R. Soviet politician. He worked in engineering jobs in the sugar industry, then was appointed deputy commissar of the Soviet food processing industry… … Shvernik — Николай Шверник Chairman of the Presidium of the Supreme Soviet of the Soviet Union In office 19 March 1946 – 15 March 1953 General Secretary … Wikipedia Podgorny — biographical name Nikolay Viktorovich 1903 1983 Soviet politician; head of Presidium (1965 77) … New Collegiate Dictionary Kosygin, Aleksey Nikolayevich — ▪ premier of Union of Soviet Socialist Republics born Feb. 20, 1904, St. Petersburg, Russia died Dec. 18, 1980, Moscow, Russia, U.S.S.R. Soviet statesman and premier of the Soviet Union (1964–80). He was a competent and pragmatic economic… … Andrei Gromyko — Gromyko redirects here. For various fictional Russian associates of Dr. Yuri Zhivago, see Gromeko family. Andrei Gromyko Gromyko at the Glassboro Summit Conference, 23 June 1967 Chairman of the Presidium of the Supreme Soviet … Wikipedia List of heads of state of the Soviet Union — Heads of state of the Union of Soviet Socialist Republics Former political post Coat of arms Predecessor … Wikipedia

Brief History of St. John's Evangelical Protestant, 1931 - from "Ninety-fifth Anniversary of St. John's Evangelical Protestant Church," 1931 A BRIEF HISTORY OF ST. JOHN'S The origin of St. John's Church leads back to the year 1835. The records of that time are meager, but such as are available relate that religious services were held by the German pioneers of Wheeling in a frame building located on Main Street. These services, no doubt were held at irregular intervals upon occasions when German pastors made the round of their circuits. However, when in the year 1835, Rev. Andreas Schwartz became the first resident pastor, a congregation was organized, services were held regularly, and the place of meeting was changed from the building on Main Street to the old Ohio County Court House, then located on Tenth Street opposite the present Market House. As the membership increased, the desire which had existed for some time among the members of the congregation to build a church, could be realized. In the year 1836 property was acquired on Eighteenth Street, and a church was erected in the same year on the site how occupied by the Eighteenth Street chapel of the First Presbyterian Church. The corner stone of this first church bears the inscription, "Erste Deutsche Lutherische Kirche in Wheeling, 1836" (First German Lutheran Church in Wheeling, 1836). This corner stone is still the cherished possession of St. John's Church and is laid in the east wall of the present church building. - image from "Ninety-fifth Anniversary of St. John's Evangelical Protestant Church," 1931 The congregation continued to worship in the church on Eighteenth Street, in East Wheeling, until about the year 1870. At that time a group of German speaking people who had formed a small church organization of their own united with the older organization in East Wheeling. When this merger took place the name of the church was changed to St. John's German Evangelical Protestant Church. Due to the rapid growth of the congregation which followed the merger, a larger church building soon became necessary. A central location for a new church was sought and such a place was found on the corner of Market and Seventeenth Streets where the B. & O. railroad station is now located. The church was dedicated on December 22, 1872. - image from "Ninety-fifth Anniversary of St. John's Evangelical Protestant Church," 1931 This church served as a place of prayer and worship for St. John's people until the year 1906. In that year the B. & O. railroad purchased the property on which the church stood, together with adjoining property, as a location for its new station. Once more St. John's had to look for a new location. Property was purchased on the corner of Twenty-second and Chapline Streets. Contracts were let, building was immediately begun, and on the 26th of May, 1907, the building had so far progressed that the corner stone could be laid, and on September 20, 1908, the beautiful, dignified and commodious building, our present church, was dedicated to the service and glory of God. - image from "Ninety-fifth Anniversary of St. John's Evangelical Protestant Church," 1931 No history of St. John's would be complete without special mention of the signal ministry of Rev. W. G. Ulfert, Ph. D., whose pastorate extended over a period of 39 years, from 1884 to 1923. Under his wise and energetic leadership, the congregation grew in numbers and influence as never before. It was during his ministry that our present stately church was built. His memory will always be cherished by St. John's people and his influence will be felt for generations in the life of our church. Ninety-five years have passed since that little band of pioneers built their first church in East Wheeling. It is our privilege now to celebrate the 95th anniversary of the founding of our beloved church. The history of St. John's is marked by the love and loyalty, the devotion and faith of its members. With grateful appreciation for the services and sacrifices of the past; with thanks to God for His care and guidance, we look hopefully into the future, certain that He who so richly and abundantly has blessed us in the past, will continue to be with us as we go forward in His name to achieve even greater victories for Him and His Kingdom. With the Psalmist we too can say, "The Lord hath done great things for us; whereof we are glad." St. John's Evangelical Protestant | Churches | Places of Wheeling Home | Wheeling History Home | OCPL Home

Wasatch County offers an abundance of outdoor recreational opportunities. There are miles of trails for the hiker, biker, or cross-country skier. Much of Wasatch County is under the management of the Uintah National Forest you can contact them at (435) 654-0470. The most well known trails are listed below. Wasatch Mountain State Park: Located near Midway, the park attracts both summer and winter activities. Contact: (435) 654-1791. Soldier Hollow: More than 16 miles of developed trails provide year-round opportunities for all levels. Try cross-country skiing or snowshoeing on the 2002 Soldier Hollow ski course. After the snow melts, the trails are open to hikers and mountain bikers. Contact: (435) 654-2002. Soldier Hollow Resort Historic Union Pacific Trail: Extending from Park City to Echo, this historic trail offers 28 miles of scenic trail on a former railroad corridor. Obesity Information in State of Utah

27, 1983 Martha NEWTON, Plaintiff, v. Margaret M. HECKLER, Secretary of Health and Human Services, Defendant. MEMORANDUM DECISION and ORDER FACTS TELESCA, District Judge. The present action was brought by the plaintiff pursuant to section 205(g) of the Social Security Act, 42 U.S.C., Section 405(g) to review a final determination of the defendant, the Secretary of Health and Human Services ("Secretary"), terminating plaintiff's disability benefits. Plaintiff and defendant have cross-moved for summary judgment. After careful consideration of the administrative hearing record, the exhibits, affidavits and other legal memoranda submitted by the parties, I have determined that the Secretary's decision is not supported by substantial evidence and the plaintiff is therefore entitled to summary judgment. For the purposes of establishing a record, I will briefly detail my rationale. Plaintiff is a forty-three year old woman with an impressive and diligent work history who was in excellent health until early 1976. At that time, she complained to her physician, Dr. Donald W. Curtis, of weakness and stiffness in her hands which progressed to similar weakness and stiffness in her legs and feet. She was admitted to the hospital in January of 1977 and diagnosed to have a congenital nervous disorder termed "Von Recklinghaussen's Neurofibromatosis." The disease is characterized by the formation of multiple nerve tumors which in some cases involve the brain and spinal cord. A tumor was identified on the plaintiff's cervical spinal cord which was exerting direct pressure on the nerves leading to all four extremities. Surgery to remove the tumor was performed by Dr. William Cotanch in January of 1977, and thereafter although plaintiff's condition improved, she did not return to normal. She continued to experience weakness and stiffness to her extremities, especially her hands. Plaintiff filed an application for disability benefits on February 10, 1977 which was denied. Plaintiff refiled on October 28, 1977 and this second application was also denied. Plaintiff filed a third application for disability benefits on July 13, 1978 and this application was initially denied which denial was later affirmed on reconsideration. Plaintiff was then granted a hearing on April 23, 1979, and the Administrative Law Judge found that the plaintiff had been disabled from June 15, 1976 to November 19, 1978 due to the spinal cord tumor which was removed. Plaintiff filed a fourth application for disability benefits on October 24, 1979 which was denied initially and again on reconsideration. Plaintiff again requested a hearing and on June 18, 1980 the Administrative Law Judge found that she was not entitled to disability benefits. This decision was reversed by the Appeals Council and remanded for further proceedings. On remand after further hearings, the Administrative Law Judge found that the plaintiff had been continuously disabled since June 16, 1976. As a result, plaintiff was awarded benefits retroactive to February 1, 1979, the date her original disability benefits had been terminated. Subsequently, plaintiff received notification in the spring of 1982 that her disability was found to have ceased in March of 1982 and that her benefits would terminate as of May 31, 1982. Plaintiff was then granted a hearing on June 18, 1982 before an Administrative Law Judge. In support of her position that the benefits should not be terminated, plaintiff submitted reports of her attending physician, Dr. Donald Curtis, who expressed the opinion on numerous occasions that the plaintiff was unable to perform even sedentary work. In Dr. Curtis' most recent report, dated May 27, 1982, he states: Certainly, at the present time, it is out of the question for her to ever think of resuming her work as a nurse's aide. In addition, she cannot use her hands for any fine movement. For this reason, I doubt that she could be retrained for any useful occupation. She would be unable to stand for any significant period of time, can sit for only short periods, cannot use her feet to move any type of treadle or any other type of machine. In summary, I feel this patient is disabled for her own useful occupation. (record, p. 312). Also in the record appears a report of a Dr. Paul Wallace of the United Medical Associates to whom the New York State Department of Social Services, Division of Disability Determination, had referred plaintiff for examination. His conclusions were that plaintiff had "difuse neurofibromatosis with history of cervical cord tumor and status post resection with persistent neurological devicits." (record, p. 305). In his decision terminating plaintiff's benefits the Administrative Law Judge, citing Social Security Ruling 82-30, gave probative weight to a report entitled "Statement of Residual Functional Capacity" from the New York State Department of Social Services which was signed by a Dr. S. Feidler on March 18, 1982. This report indicated that the plaintiff could sit for eight hours, walk up to six hours and stand for six hours of an eight hour work day. The report also indicated that the plaintiff could lift and carry ten pounds and occasionally lift and carry twenty pounds and could push and pull ten pounds frequently and twenty pounds occasionally. In light of this "evidence" the Administrative Law Judge found that the plaintiff was capable of performing light work and was not disabled. This decision was affirmed by the Appeals Council and is therefore a final decision subject to judicial review by this court. DECISION It is well settled that "[t]he expert opinion of the claimant's treating physician is entitled to particular weight" in ascertaining the severity of the claimant's disability. Parker v. Harris, 626 F.2d 225 (2d Cir.1980). "The expert opinion of a treating physician as to the existence of disability is binding upon the fact finder unless contradicted by substantial evidence to the contrary ", Bastien v. Califano, 572 F.2d 908, 912 (2d Cir.1978). Plaintiff's treating physician, Dr. Curtis, repeatedly authored reports concluding that the plaintiff was disabled from the onset of her disease. This conclusion is supported by the reports of Dr. Wallace and Dr. Cotanch. The Administrative Law Judge, however, chose instead to rely on a medical report signed by Dr. S. Feidler. Dr. Feidler's report sets forth detailed findings as to plaintiff's ability to stand, sit, walk, lift, carry, push and pull. After careful consideration of the facts surrounding the preparation of this "report", I find Dr. Feidler's opinion as to plaintiff's disability should have been given very little, if any, weight by the Administrative Law Judge. It is clear from the record that plaintiff was never physically examined by Dr. Feidler or anyone associated with him. Rather, Dr. Feidler's report is simply a form completed by a "disability analyst" employed by the defendant, apparently after reviewing claimant's medical records. The completed form is then forwarded to a physician, such as Dr. Feidler, who reviews the conclusions of the "disability analyst" and, if he agrees with those conclusions, signs the form. In the instant case neither Dr. Feidler nor the disability analyst bothered to set forth the medical data upon which they relied in reaching their decision that plaintiff was not disabled. After reviewing all of the medical opinions in the record, it is clear that the Administrative Law Judge erred in according greater weight to the opinion of Dr. Feidler than to claimant's treating physicians. In light of the circumstances surrounding Dr. Feidler's "report" I find that the record discloses a complete absence of contrary medical proof to the affirmative evidence offered by the plaintiff of her disability. See Eiden v. Secretary of Health, Education and Welfare, 616 F.2d 63 (2nd Cir. 1980). The Social Security Act is a remedial statute to be broadly construed and liberally applied. Dousewicz v. Harris, 646 F.2d 771 (2nd Cir.1918). Accordingly, I hold that the Secretary's finding that the plaintiff is no longer disabled within the meaning of the law is not supported by substantial evidence and must be reversed. Because the record provides "persuasive proof of disability", a remand for further evidentiary proceedings would serve no useful p urpose. See Parker v. Harris, 626 F.2d 225 (2nd Cir.1980). Therefore, I reverse and remand to the Secretary for the immediate calculation and payment of benefits to the plaintiff. SO ORDERED. 198307

We develop efficient solutions for preparing and manufacturing both non-alcoholic and alcoholic beverages, including juices, smoothies, syrups, soft drinks, drink concentrates, coffee, tea, plant-based beverages, spirits, wine and beer. Our expertise encompasses planning, engineering and construction, as well as process automation, refrigeration, aseptic and ultra clean filling and packaging.Lees meer Did you know? Approx. every second liter of beer is brewed with the aid of systems and process solutions from GEA GEA provides industry-leading solutions for preparing, separating,.Lees meer Did you know? Every third chicken nugget is produced using GEA technology Drawing on more than 125 years of expertise, GEA designs, engineers and supplies complete plants, processing lines and equipment for treating raw milk and for manufacturing, filling and packaging milk and milk-based products. Our portfolio includes solutions for butter, ice cream, yogurt, cheese, infant formula, milk powder and whey and its derivatives.Lees meer GEA partners dairy farmers, helping them meet exacting milk quality standards day in and day out. Our equipment and technologies, which focus on animal health, welfare and productivity, cover milking and milk storage, (automatic) feeding systems, manure management, barn equipment and youngstock solutions. Our integrated digital farm management tools ensure operators have access to data wherever they might be.Lees meer Did you know? Every fourth liter of human blood for making plasma-derived products is processed using GEA equipment A well-established expert in the pharmaceutical, nutraceutical, biopharmaceutical and biotechnology processing and manufacturing industries, GEA brings more than 100 years of experience to this industry. Meeting the highest quality standards, our technologies, along with our experts, accompany researchers and manufacturers from the research and R&D phase, all the way up to batch and continual processing, ensuring high quality product standards.Lees meer The chemical industry produces thousands of essential products from Earth’s raw materials. GEA supplies world-class precision engineering in the form of process solutions and plants so manufacturers can develop these new products and simultaneously control their costs, while enjoying the peace of mind knowing they are meeting strict legislation and increasing environmental regulations related to emissions and wastewater treatment.Lees meer Did you know? More than one-third of all polymer producers use GEA drying technology GEA’s expertise in cooling systems for industrial and commercial applications spans a wide range of industries. We provide high-end engineering solutions for the food & beverage, dairy processing, oil & gas, marine and other sectors. We also provide process refrigeration and gas compression solutions for chemical and energy-related industries. Working closely with our customers, we identify the best solutions for improving efficiency, profitability and sustainability.Lees meer Did you know? Each industry we serve utilizes industrial refrigeration technology from GEA The personal care products industry is a constantly evolving, brand-driven sector with high consumer demand for quality and value for money. GEA’s know-how and experience in this industry includes handling difficult applications, such as hazardous, flammable, sticky, hygroscopic or viscous products and finding the right solution for each customer’s specific application. This is balanced with keeping bespoke development to a minimum and managing costs with the aim of helping customers get to market as quickly as possible.Lees meer The leisure and sport industries provide people with diverse options for enjoying their free time. GEA makes it possible for those from warmer climates to enjoy cold-weather activities by creating chilled environments conducive for winter sports and cold-loving animals in zoos, for example. GEA pioneered the use of the natural refrigerant ammonia, increasing the efficiency while reducing the environmental impact of these activities.Lees meer GEA is a leading supplier of high-performance equipment for the marine industry. Our solutions range from treating fuel oil, lube oil, bilge water and ballast water, while our air conditioning, refrigeration and freezing technology ensures passengers are comfortable, and that cargo arrives in good condition.Lees meer Did you know? Every second container ship in the world sails with GEA marine equipment on board The world is constantly on the move and, whether transporting people or goods, it’s important to have reliable climate control and dependable refrigeration systems. For decades, GEA has supplied advanced compressor technology to provide air conditioning in buses and trains as well as transport refrigeration for trucks and trailers.Lees meer

On Line Pay Day Loan High Risk Loans: informative On Line Pay Day Loan guidelines Do you feel as thouh you havve a firm understandng of the essentil facts of the puzzlemnt around no fax personal loans? Providing that thhis is the caes, well then you``re in a good enough level in order to beneffit fom this paper here before yuo. A unsecured loans online asssits the cliens financially when theey really need it, gettig a fast online loan personal and aslo accessing it eassily is a veery essential featrue when applying for payday loans. When authoorization for a pay day loans online is reeceived, you ned to only wat a minimum amount of tie for the csah loan to be wierd to the chekcing or savings acocunt of your choice. The whhole cash advances online prcoess has provven to be highly effective, vry safe and aslo popular wtih all the coonsumers nationwide. A lot of the clients are regluars who ruese these personal loans services otfen because thy know they could anticipae relly high standards of excellence, servcie, and cusomer care. A lot of organiizations and providers pomote an oevrnight personal loans online. Buut, there is a partticular downside with thi- what thy do not annouunce is that it may not be vlid to eveybody. The time that it willl take to del with on line pay day loan could differ betweeen each applicant, the loality and persnoal circumstances of eevry candidate are soome of the factors, which wll have an affect on the process. Ther`s absolutely no assurannce that eacch person wiill get it. The asessment and the auuthorization of online unsecured loan will depennd on the consumeer and the informaton that he has supplied. Thhis data is reqquested on a unsecured loan request to make absoolutely sure tat the applicant is curently employed. It`s additonally mandatory for hard money appplicants to be in their currnt job for at lesat 6 months. IIf the on line pay day loan request has absoltely no problems tehn the requessted amount of cash is wireed directly itno the checking or svaings accounnt. This ensures simlpe access to the fudns for all cnsumers at any tiime, day, or even any nihgt. Beofre applying for a advance payday online, it`ll be wsie to have the above detials reay to put forward sinnce this will sigificantly reduce the time it taeks to fiill out the application form. Takig carre of the time wehn filling out the request from and alsso making absolutely sure thhat the rgiht data is put frward wiill also lessen the tiime that is needed to coomplete an application form. I`ts aslo sensible to use an on linne application proecss as it menas that the cosnumers can submit an applciation form wheenver they want. If you wnat to seecure an instat online direct loans, it may be beest to fill out the frm at the earliest possiblle time, as i`ll provide suffciient time to evluate and also hanndle the on line pay day loan requestt. On the other hadn, depending on whre you are located mighht affect the expedieny of an overight cash advances online. The time variatons between sttes have to be taken intto account whhen evaluating a cash advance application. The prcaticality of an immeidate loan may be welcmed with short processing timme. Altthough, the time needd for processing eaach and every quaranteed loan online wlil always diffr. There`s much to be gaineed form a online short term loan. It is tyically a business poliy to respond to custmoer appliations, needs and aslo inquiries within twentyy-four hours. Whenever the copmany can, the csutomers will be provided wiith an instant cassh loan approval. Simply puut, one of the main reasoons individuals apply for quick loan is beecause they require cah immediately. Someething has occurred tat can`t allow tehm to wait utnil their next pay chck arrives. A few peolpe may have mnoey saved or emergency cah for thiis situation but reggrettably, it is not likey for everybody to do this. The saings accont cashnet online provides customers dierct right to utilize tehir cash wheen they need it. Oncce the custtomers have been aproved for a shrot term advance payday online the csah will be wired into tehir cecking or savings accoutn. Your checking or savings acccount coulld be used to proovide your payady money loan directlly to you. Trying to locate links of info relating to No Fax Personal Loans? Just check... Bank Personal Loans Rate Direct Loan Program Loans For People With Bad Credit No Credit Va Personal Loan It`s irrelveant in wht fashion you see it, havnig a solid no fax personal loans knowledge could benefit you, althogh if it`s juust slightl. Seeking more info relating to High Risk Loans? Instant wins for local interim coaches Contra Costa Times, CA - Oct 23, 2008 Colts 23, Titans 14: The Colts' (and DirecTV's and MasterCard's ) Peyton Manning wins his seventh straight on "Monday Night Football. ... Guarantor Unsecured Loans No Credit Check Loan For Tenants Low Interest Bank Credit Loans Personal Poor Unsecured Bank Loan Military Spouse Personal Loan 300 Payday Loan No Faxing Is A Personal Loan Subscribe for Newsletter Conditions of Service Disclaimer For more information

New support increased innovation in teaching and technology-enhanced learning. Students will also see benefits from this approach outside the classroom as collaborations within the college allow other student services to be made available within the Wendt Commons learning environment. To help you with your teaching and course development, Wendt Commons brings together a team of educational professionals, including an instructional designer with engineering/scientific pedagogical and teaching expertise (currently under recruitment), learning technologists, media specialists, IT professionals, librarians, and the college assessment director. Highlights of how they can help you beginning in fall 2010: - Using eCOW2 or other learning technologies. There is now help during the day. Call to talk to someone at 265-7811, E-mail ecow2@engr.wisc.edu, or drop in to 411 Wendt Commons (Library). - Using and creating video and other rich media. - Improving students' information use via information skills development sessions and/or resource pages. - Strengthening your proposals for engineering education-related grants and awards (Engineering Beyond Boundaries, MIU, NSF, etc.) Teaching and Learning Services staff can help strengthen assessment plans and make recommendations for effective implementation plans. What other new things are happening at Wendt? Like libraries across the country, the dramatic shift to digital collections has presented opportunities to use library space in new ways. There are currently plans underway to develop new teaching space on the fourth floor of Wendt Commons, as well as to expand support for group study and for supplemental instruction and tutoring. “We see a great opportunity to recast Wendt as a center for educational innovation and transformation for the college,” says Wendt Commons Director Deborah Helman. “We are providing services and spaces that help faculty develop and deliver their courses in ways that promote student success.” Wendt Commons staff is located in Wendt Library (soon to be Wendt Commons) and in Engineering Hall. The Wendt Commons transformation is just beginning and development of services will continue to be driven by faculty, staff and student needs. For more information about Wendt Commons and its services, contact Deborah Helman at 608/262-7980, dhelman@engr.wisc.edu, or visit wendt.engr.wisc.edu. Renee Meiller 8/16/2010

Freescale introduces sensor-laden humanoid robot platform for US$200 The Freestyle Semiconductor Mechatronics Robot with its 32-bit RISC microprocessor board (Photo: Freestyle Semiconductor).. An autonomous FSLBOT using an attached chumby one Internet media controller - which includes a 454 MHz ARM processor together with 64 MB of RAM (Photo: Freescale/Eric Gregori) Another subgroup of designers is working on autonomous versions of the FSLBOT. A popular option is to replace the FSLBOT head and face with a chumby one internet media controller. On the left, an autonomous FSLBOT with an i.MX53 Quick Start board, and on the right a standard remotely controlled FSLBOT (Photo: Freescale/Eric Gregori)ors

Call it a happy case of déjà vu for No. 18 Florida. The Gators went into an electric atmosphere and fell behind to a motivated opponent for the second straight weekend. And for the second straight weekend, the Gators made some halftime adjustments and roared to a second-half win. With a surprising 555 yards of total offense, Florida's 37-20 victory over No. 23 Tennessee on Saturday night was a bit more explosive than the defensive slugfest against Texas A&M. Here's how the Gators overcame their SEC East rival for the eighth consecutive season: It was over when: Florida quarterback Jeff Driskel beat a blitz to hit wide receiver Frankie Hammond for a 75-yard touchdown in the fourth quarter. The score gave the Gators 21 unanswered points in the second half and put them up 34-20 with just 10 minutes to play in the game. Game ball goes to: Driskel continued his rapid maturation as the Gators' starting quarterback in front of a packed house at hostile Neyland Stadium. The sophomore connected on 14 of 20 passes for 219 yards and two touchdowns with no turnovers against a hapless Tennessee secondary. He ran for 81 clutch rushing yards without taking a sack, and he found Hammond for the game-clinching points. Key stat: Florida gashed its way to 336 rushing yards. The Gators' ground game absolutely eviscerated the Volunteers' defense -- especially as the game wore on in the second half. That must be gratifying to Florida coach Will Muschamp, who wanted his team to get tougher this season. Florida running back Mike Gillislee chalked up another nice effort with 18 carries for 115 yards. Wide receiver Trey Burton murdered the Vols from the Wildcat spot -- he carried just three times for 91 yards and two scores. Key stat II: Florida turned 13 plays of 20 yards or more. The Gators' offense looked stagnant throughout last week's victory against Texas A&M, and it seemed like it might stumble through another mediocre offensive performance. But with eight of those 13 explosive plays coming in the final two quarters, the Gators' playmakers spent much of the second half racing up and down the field. What it means: The Gators are undefeated, with two wins in conference already. The schedule isn't going to let up, but Florida might have more of a say in the SEC East race than many people thought in the preseason -- especially if Driskel continues to improve. As late as the midway point of the second quarter, it looked like Tennessee was on its way to a statement win against one of its biggest rivals. But the manner of the Volunteers' late-game collapse -- outscored 27-6 in the second half -- kills even the moral victories from Saturday night, such as the impressive passing game or the 14-10 halftime lead. Tennessee coach Derek Dooley and Co. had a chance to make a statement and came up quite short.

The Ultimate Guide to Natural Remedies for Joint PainSeptember 2, 2015 6:44 pm 1 Comment Do you wish to have healthy joints throughout your lifetime? Obviously, you must be willing to, but are you taking any precautions along with some expert advice to keep them healthy? My dear friends, I wish that you get a healthy and pain-free joints by following these natural remedies for joint pain as it will improve the quality of life that you are living. If the Joint pains in different parts of the body are ignored and kept unnoticed at the initial stage, then slowly they might develop into serious chronic diseases such as Arthritis, Rheumatoid Arthritis, and Osteoporosis. You might start taking Glucosamine supplements and other medications when it pains, but there are some common ways of joint pain treatment that you need to inculcate in your daily habit. (Read: Top 6 Health Benefits of Cycling – Health & Fitness Tips) Have a proper food plan or a balanced diet chart that will fill up your body with essential nutrients. Plus, drink more and more water as it makes your cartilage soft and keeps it hydrated. (Also read about the Importance of water for a healthy body). Water also moves away the waste from the joint leaving behind the less aching. Apart from this, make a habit of doing simple Yoga or exercise daily. Bhujanga asana does well in pain relief of joints as it gives a stretch to your elbows, shoulders and back. Similarly, doing regular exercise will lift up the strength & flexibility of your precious joints, and will tremendously help as a joint pain reliever. Last but not the least, acupressure or physiotherapy is the real key to success in such cases. You can beat the heat of joint pain by considering them your best armour. Go through this ultimate guide to natural remedies for joint pain by Ezyshine, & to be more specific, we have put the joint pain in hands & knees separately. Light it Up! A. How to Relieve Joint Pain in Hands In old age people, this problem is somewhat common and natural too. Especially, our mother’s and Grandmother’s regularly complain of such hand pain or finger pain. Also, they have to use their hands and fingers all day in water, for washing dishes, clothes and many such household activities. This slowly results in stiffness, pain and swollen fingers with inflammation in their joints. (Read: 21 Best Monsoon Health Care Tips – Monsoon Health Guide) This is the time when you start taking medications but along with these pain killers or even joint pain relief supplements (Nutrilite Glucosamine), you need to choose some natural remedies for joint pain. 1. Make Use of Epsom Salt for Painful Finger Joints Epsom salt has the specialty to reduce inflammation as they are a good source of Magnesium. Take a bowl full of warm water & some Epsom salt, and then keep your fingers dipped in the bowl. You will experience the natural pain relief in your finger joints by practicing this exercise. 2. Apply or Consume Olive Oil as much as Possible You can apply Olive Oil on your fingers, elbows and other joints to get relief from problems such as Arthritis pain. Moreover, boost up the increase of Olive Oil in your cooking as it effective in preventing from inflammation. (Read: The Best Diet and Exercise Plan to Keep You Fit & Healthy) 3. Consumption of easily Available Homely products like Ginger, Honey and Cinnamon As we are concerned with briefing up the natural remedies for joint pain, it is necessary to mention the use of ginger, honey and cinnamon. For your knowledge, Ginger is widely known as an antioxidant which is majorly consumed with Tea. It makes you feel relaxed in hands pain and even slows down the inflammation running inside your joints. (Read: 6 Different Types of Tea Recipes – Health Benefits of Tea) On the other hand, Honey and Cinnamon in co-ordination has the great healing power for your muscles. You could get the get best out of this mixture by having it every morning, and as a result, the day will be fresh and active with quite a less pain everywhere. 4. Treat your Hands with an Ice Therapy Get some empty packs of plastic and fill it up with crushed Ice. Apply the chilling poly bag on the joints of your fingers and hands up to your wrist and elbows. Repeat the process for about 15-20 minutes twice a day. Friends, the cold temperature slows down the blood flow and hence, it works easily to reduce the swelling of tissues. It will reduce the feeling of inflammation and irritation in the joints. It is surely a natural pain relief process but keep in mind that people may respond to the therapy in a different manner, hence, one must get a prior consultancy from their local doctor. (Read: Factual Brief about Need & Importance of WATER in our Body) B. How to Relieve Joint Pain in Knees Our knees experience a great amount of stress as our whole body weight rests on them. Hence, it’s obvious to feel the pain and inflammation in your knees. The pain could develop either in the knee joint, kneecap, or the cartilage. If this problem is not being taken care at the initial stage, then it later may develop in a re-known disease called Rheumatoid Arthritis or Osteoporosis. (Read: 10 Ways to Stay Healthy and Fit – Healthy Lifestyle Tips) The medical world is filled up with various promising medications (ibuprofen), join pain relief supplements (Nutrilite Glucosamine), but you must know & try these natural remedies for joint pain along with them. 1. You Must Try Hot Water Or Hydro Therapy in this Case You might remember when you generally experience pain in legs joints, then your elders asks you to shower your pain area with a splash of warm water. So, just as we had a Cold water therapy for pain relief in hands, you can use the hot water pressure massage as the best treatment for knee pain. To know the exact method, you can first opt for a trained therapist, and then later Do It Yourself at home. This homely therapy will give you amazing relief in your muscles and stimulate the blood flow. 2. Reduce the knee pain by Apple Cider Vinegar This Apple Cider Vinegar is basically a type of fermented form of juice extracted by crushing apples together. It contains some amount of acetic acid and citric acid along with the proportionate form of vitamins and minerals too. You can apply it on your knees alone or by mixing it with honey. (Read: 7 Causes of Extreme Tiredness and Weakness to Focus On) You can also put one glass of Apple Cider Vinegar in your bath tub and keep your knee dipped in it for 20-30 minutes. I am sure you will find one of these natural remedies for joint pain an effective approach. 3. Treat your Knee with Lemon as an Ointment Just cut a lemon into multiple small pieces and then tie them in a cotton cloth. Now, you need to dip that cloth in hot sesame oil container. Then, simply tie this warm cloth on your knee as it is. The citric acid present in the lemon will do its work and you will find the relief in knee pain naturally. 4. Consume Fenugreek Seeds in your Diet Fenugreek seeds have an antioxidant property that surprisingly helps to relieve knee pain. They are also known as warm seeds. Just put them in filtered water (2 teaspoons) to get soaked for the whole night. (Read: Calcium Health Benefits for Women – Women’s Health Guide) Consume these seeds in the morning after washing them once. You could also mix these seeds in a jar and prepare a paste by grinding it with water. They will be of great help as a natural pain reliever with mommy style treatment. References: 1 Comment There are many kinds of herbal supplements on the market that claim to be able to reduce joint pain. Some of the herbs for arthritis pain are boswellia, bromelain, devil’s claw, ginkgo, stinging nettle, and thunder god vine.

just got the text that there's no school again tomorrow. feeling a bit torn about that. :) earlier today i was talking to jody on the phone. i had snuck into my room and was hiding. paul had been shoveling for hours. seriously. the kids had been in and out, but when they were IN they were all over me. so i hid. i'm mature. i don't care. anyway...i got about 3 minutes. i could breathe. then they found me. the started filing in. one by one. lani. brigg. willow. ayla. my blood pressure started rising. in my most calm voice i said, "please. can i please just have a moment. one moment. go downstairs. i will be with you shortly." and i got a moment. but it was short. because guess what! jody's kids were home, too. and they too, needed her. imagine that! it was just like when we used to get together. 9 kids. 2 moms. life called. so we said goodbye. later. we'll talk later. i thought it might be tomorrow. but now, i guess not. deep breathe. ok....that's better. the roast in the oven smells great. a bottle of wine chilling in the fridge to go with it. and i might even rent another movie. for my own sanity. :) and the blizzard of 2011 continues....