MACHINE_NO
stringclasses 48
values | ERROR_ID
int64 1
999
| ERROR_CODE
stringclasses 245
values | ERROR_DESC
stringlengths 14
179
| ERROR_CATEGORY1
stringclasses 11
values | SOLUTION
stringlengths 40
290
|
|---|---|---|---|---|---|
KM-ASSYH1-06 | 19 | M7018 | Front stage PLC1-M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution for the Front stage PLC1-M7018 error described as "Please press the reset button before starting the automatic process" is as follows: Press the reset button before starting the automatic process. This process should restart and run |
KM-ASSYH1-06 | 180 | M7019 | Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first | Abnormal personnel operation | The solution to the error "Post-stage PLC2-M7019-the equipment has not returned to the origin, please perform the equipment return to the origin first" involves performing an equipment return to the origin first. This ensures |
KM-ASSYH1-06 | 1 | M7000 | The front-end PLC1-M7000-starts to detect that there is material in the work area, please confirm the status of the work area | Abnormal personnel operation | Unfortunately, without any context or additional information provided, it's impossible to provide a specific solution to the described error. However, it is recommended to check the documentation and user manuals for the PLC1-M7000, as |
KM-ASSYH1-06 | 17 | M7016 | If the front section PLC1-M7016-EMO&&DOOR is opened, please check the safety door or emergency stop X17 | Abnormal personnel operation | The solution for this error is to check the safety door or emergency stop X17 when the front section PLC1-M7016-EMO&&DOOR is opened. |
KM-ASSYH1-06 | 18 | M7017 | Front stage PLC1-M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the abnormal Front stage PLC1-M7017 equipment model setting is to set a new, valid model in the PLC. This can usually be done through the PLC's programming software or by physically reset |
KM-ASSYH1-06 | 20 | M7019 | Previous PLC1-M7019-The equipment has not returned to the origin, please perform the equipment return to the origin first | Abnormal personnel operation | The solution to the error "Previous PLC1-M7019-The equipment has not returned to the origin, please perform the equipment return to the origin first" is to first perform the equipment return to the origin before proceeding with |
KM-ASSYH1-06 | 291 | M7130 | Rear section PLC2-M7130-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | One possible solution for this error is to physically remove the TRAY plate from the conveyor belt before the PLC2-M7130 can be accessed. This should prevent any interference or damage to the belt caused by the plate's |
KM-ASSYH1-06 | 177 | M7016 | When the rear section PLC2-M7016-EMO&&DOOR is opened, please check the safety door or emergency stop X17 | Abnormal personnel operation | The solution for the error you described is to ensure that the safety door or emergency stop X17 is functioning properly and has not been triggered when the PLC2-M7016-EMO&&DOOR section is opened. This |
KM-ASSYH1-07 | 182 | M7021 | [Later Section] M7021-Product abnormality when starting secondary positioning | Abnormal personnel operation | The solution to the error described in M7021-Product abnormality when starting secondary positioning is to ensure that the product is positioned correctly and not obstructed. Additionally, the operator should verify that all safety features are functioning properly |
KM-ASSYH1-07 | 189 | M7028 | [Later section] M7028-Safety door opens abnormally during return to origin | Abnormal personnel operation | The solution for the error described as M7028-Safety door opens abnormally during return to origin requires an inspection of the safety door drive system for any damage or malfunction. The door may need to be adjusted or replaced |
KM-ASSYH1-07 | 195 | M7034 | [Later Section] M7034-Abnormal conveyor belt card in work area | Organizational Abnormality | The solution for the error described as M7034-Abnormal conveyor belt card in work area depends on the specific cause of the problem. It could be that the card is damaged or dirty, or that there is a malfunction in |
KM-ASSYH1-07 | 198 | M7037 | [Later section] M7037-Work area blocking cylinder abnormality | Machine cylinder abnormality | The solution for the M7037 work area blocking cylinder abnormality error involves locating and correcting the issue that is preventing a cylinder from functioning properly in the work area. This may include adjusting the parameters of the cyl |
KM-ASSYH1-07 | 200 | M7039 | [Rear section] M7039-Abnormal positioning cylinder on the side of the work area | Machine cylinder abnormality | The solution to the Rear section M7039-Abnormal positioning cylinder on the side of the work area error is to adjust or reposition the cylinder so that it is properly aligned with the work area. This may involve |
KM-ASSYH1-07 | 203 | M7042 | [Rear section] M7042-Width adjustment motor rear limit abnormality | Electronic control abnormality | The solution for the "Rear section M7042-Width adjustment motor rear limit abnormality" error typically involves adjusting the width of the rear section to ensure proper clearance between the vehicle body and the rear wheels. This |
KM-ASSYH1-07 | 209 | M7048 | [Rear section] M7048-Left suction nozzle lift cylinder abnormality | Machine cylinder abnormality | The solution for the error described as "rear section M7048-Left suction nozzle lift cylinder abnormality" involves checking for leaks, damage, or worn parts in the lift cylinder and replacing or repair |
KM-ASSYH1-07 | 211 | M7050 | [Rear section] M7050-Left lifting cylinder abnormality | Machine cylinder abnormality | The solution for the left lifting cylinder abnormality in the rear section of M7050 is to inspect the cylinder for leaks, damage, or incorrect pressure settings. Replacement of the cylinder might be necessary if it is |
KM-ASSYH1-07 | 213 | M7052 | [Rear section] M7052-Right suction nozzle lifting cylinder abnormality | Machine cylinder abnormality | The solution for the M7052 error may involve troubleshooting and repairing the right suction nozzle lifting cylinder. It may involve checking for any leaks or blockages in the nozzle that could be causing |
KM-ASSYH1-07 | 214 | M7053 | [Later section]M7053- | Machine cylinder abnormality | The solution to M7053 error depends on the specific issue. It could be caused by software updates, hardware failure, or network issues. You can try updating the software or replacing the hardware, and if that doesn't work, contact |
KM-ASSYH1-07 | 215 | M7054 | [Rear section] M7054-Right lifting cylinder abnormality | Machine cylinder abnormality | The solution for the error described as [Rear section] M7054-Right lifting cylinder abnormality may vary depending on the specific issue but usually involves checking the connections, pressure release valves, and replacing faulty parts. |
KM-ASSYH1-07 | 218 | M7057 | [Rear section] M7057-The left suction nozzle is abnormal in vacuum suction | Electronic control abnormality | M7057 error in vacuum suction indicates abnormal behavior in the left suction nozzle of the rear section. To fix the error, inspect and clean or replace the nozzle as required. |
KM-ASSYH1-07 | 219 | M7058 | [Rear section] M7058-Right suction nozzle vacuum abnormality | Electronic control abnormality | The solution for the error described as "Rear section" M7058-Right suction nozzle vacuum abnormality may involve checking for blockages or restrictions in the suction hose, inspecting the nozzle for |
KM-ASSYH1-07 | 225 | M7064 | [Rear section] M7064-The upper jacking cylinder in the Tray area is abnormal | Machine cylinder abnormality | The solution for the error "Rear section M7064-The upper jacking cylinder in the Tray area is abnormal" would be to identify the cause of the abnormal condition and take corrective actions to repair or replace |
KM-ASSYH1-07 | 227 | M7066 | [Rear section] M7066-The jacking cylinder at the lower level of the Tray area is abnormal | Machine cylinder abnormality | The solution for this error can vary depending on the specific details of the problem. However, one possibility could be to check if the cylinder oil is properly changed and if the jacking system is functioning optimally. If the issue is related to the |
KM-ASSYH1-07 | 229 | M7068 | [Later section] M7068-The material cylinder entering the Tray section is abnormal | Machine cylinder abnormality | The solution for the error M7068 could be identifying and addressing the issue with the material cylinder, ensuring it meets the required specifications and is properly aligned with the Tray section. It may also involve updating the control software or adjust |
KM-ASSYH1-06 | 131 | M7130 | Front section PLC1-M7130-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | The solution to the error "Front section PLC1-M7130-Please remove the TRAY plate from the conveyor belt first" is to physically remove the tray plate from the conveyor belt before attempting to process any items. |
KM-ASSYH1-06 | 161 | M7000 | The back-end PLC2-M7000-starts to detect that there is material in the work area, please confirm the status of the work area | Abnormal personnel operation | The solution for the error would be to visually inspect the work area to confirm if there is any material present. Once the area is clear, the PLC can be restarted, and the error should no longer occur. |
KM-ASSYH1-06 | 178 | M7017 | Backend PLC2-M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the error "Backend PLC2-M7017-Equipment model setting is abnormal, please set the model" is to locate and reset the faulty equipment's Model Number on the Backend PLC |
KM-ASSYH1-06 | 179 | M7018 | Backend PLC2-M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution for the error "Backend PLC2-M7018-Please press the reset button before starting the automatic process" is to press the reset button for the PLC2-M7018 device to restart the automatic |
KM-ASSYH1-07 | 17 | M7016 | [Previous section] M7016-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The solution for the error "M7016-EMO&&DOOR is open, please check the safety door or emergency stop?" in a Siemens SIMATIC HMI system is usually to close the safety door or press |
KM-ASSYH1-07 | 18 | M7017 | [Previous paragraph] M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the error is to set the equipment model according to the manufacturer's instructions. This can typically be found in the documentation or on the manufacturer's website. If you are unable to find the instructions, you may need to contact the |
KM-ASSYH1-07 | 19 | M7018 | [Previous paragraph] M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | The solution to this error would be to press the reset button as instructed before starting the automatic process. If the reset button doesn't work, try resetting the device or contacting customer support for further assistance. |
KM-ASSYH1-07 | 22 | M7021 | [Previous paragraph] M7021-Product abnormality when starting secondary positioning | Abnormal personnel operation | The solution to M7021-Product abnormality error when starting secondary positioning may involve updating the Firmware to the latest version or manually resetting the device settings. If the problem persists, it is recommended to contact the |
KM-ASSYH1-07 | 35 | M7034 | [Previous section] M7034-Abnormal conveyor belt card in work area | Organizational Abnormality | The solution for the M7034-Abnormal conveyor belt card in work area could involve several steps such as inspecting the belt for damage, clearing any debris or foreign objects, tightening the belt or replacing it if it's |
KM-ASSYH1-07 | 38 | M7037 | [Front section] M7037-Work area blocking cylinder abnormality | Machine cylinder abnormality | The solution for the error described as Front section M7037-Work area blocking cylinder abnormality is to use the CNC controller's diagnostic capabilities to identify the problem and then follow the manufacturer's instructions for repair or replacement |
KM-ASSYH1-07 | 40 | M7039 | [Front Section] M7039 - Abnormal positioning cylinder on the side of the work area | Machine cylinder abnormality | The solution for the M7039 error is to ensure that the positioning cylinder is in its proper location and properly secured, and to verify that all safety interlocks are functioning properly. If the issue cannot be resolved, contacting |
KM-ASSYH1-07 | 43 | M7042 | [Front section] M7042-The front limit of the width adjustment motor is abnormal | Electronic control abnormality | The solution for the M7042 error is to first determine if the abnormal front limit is due to a hardware or software issue. If the issue is hardware, then it may be necessary to replace the motor or adjust its physical limits. |
KM-ASSYH1-07 | 49 | M7048 | [Previous section] M7048-Left suction nozzle lifting cylinder abnormality | Machine cylinder abnormality | The solution to the error M7048-Left suction nozzle lifting cylinder abnormality involves inspecting and repairing the left suction nozzle lifting cylinder, replacing worn-out seals, checking and adjust |
KM-ASSYH1-07 | 51 | M7050 | [Front Section] M7050-Left lifting cylinder abnormality | Machine cylinder abnormality | The solution for the error described as [Front Section] M7050-Left lifting cylinder abnormality involves troubleshooting, inspection, and repair of the affected components, including the lifting cylinder and any associated controls or components |
KM-ASSYH1-07 | 53 | M7052 | [Previous section] M7052-Right suction nozzle lifting cylinder abnormality | Machine cylinder abnormality | The solution for the error described as M7052-Right suction nozzle lifting cylinder abnormality would involve identifying and correcting any potential issues with the lifting cylinder's wiring or connections, ensuring proper tension in |
KM-ASSYH1-07 | 55 | M7054 | [Front Section] M7054-Right lifting cylinder abnormality | Machine cylinder abnormality | The solution for a front section M7054-Right lifting cylinder abnormality would involve fixing any equipment malfunctions and possibly replacing damaged components or parts to ensure proper function and performance of the affected equipment. |
KM-ASSYH1-07 | 58 | M7057 | [Previous section] M7057-The left suction nozzle is abnormal in vacuum suction | Electronic control abnormality | The solution to the M7057 error often involves adjusting the suction vacuum settings and correcting any faulty hardware issues. Using the appropriate vacuum tool and removing any debris or blocks in the nozzle may also fix the issue. |
KM-ASSYH1-07 | 59 | M7058 | [Previous section] M7058-Right suction nozzle is abnormal in vacuum suction | Electronic control abnormality | The solution for the error described as M7058-Right suction nozzle is abnormal in vacuum suction involves troubleshooting the nozzle to determine the cause of the problem, performing any necessary repairs, and testing |
KM-ASSYH1-07 | 65 | M7064 | [Front section] M7064-The upper jacking cylinder in the Tray area is abnormal | Machine cylinder abnormality | The solution for the M7064 error in the Tray area may involve inspecting the upper jacking cylinder and addressing any abnormalities, such as replacing a faulty cylinder. The issue should be resolved as soon as possible |
KM-ASSYH1-07 | 67 | M7066 | [Front section] M7066-The jacking cylinder at the lower level of the Tray area is abnormal | Machine cylinder abnormality | To resolve the error with the abnormal jacking cylinder at the lower level of the Tray area, it's recommended to check the cylinder's condition, ensure there is no leakage, lubrication of the worn parts and |
KM-ASSYH1-07 | 69 | M7068 | [Previous section] M7068-The material cylinder entering the Tray section is abnormal | Machine cylinder abnormality | The solution to the error "M7068-The material cylinder entering the Tray section is abnormal?" is to address the issue by adjusting or preventing the material cylinder from entering the tray section in an abnormal manner. |
KM-ASSYH1-07 | 161 | M7000 | [Later Section] M7000-Start to detect the presence of materials in the work area, please confirm the status of the work area | Abnormal personnel operation | The solution for the error described as [Later Section] M7000-Start is to confirm the status of the work area. This can be achieved by manually scanning the area using the device's sensor or by using software to |
KM-ASSYH1-07 | 177 | M7016 | [Later section] M7016-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The solution for this error is to check the safety door or emergency stop, close the door and retest the system. If the problem persists, maintenance or repair may be required. It is recommended to follow the manufacturer's instructions or contact a |
KM-ASSYH1-07 | 1 | M7000 | [Previous section] M7000-Start to detect the presence of materials in the work area, please confirm the status of the work area | Abnormal personnel operation | The solution to the error M7000-Start to detect the presence of materials in the work area, please confirm the status of the work area is to ensure that the work area is clear and free of any materials. This will allow the |
KM-ASSYH1-07 | 178 | M7017 | [Later section] M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | To resolve the error "Later section M7017-Equipment model setting is abnormal, please set the model," follow these steps: 1. Power off the device in question. 2. Reset the device to its |
KM-ASSYH1-07 | 180 | M7019 | [Second paragraph] M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The solution to the error M7019 "The device has not returned to the origin, please execute the device to return to the origin first?" is to follow the instructions provided on the device, which might include pressing a button or entering a |
KM-ASSYH1-07 | 20 | M7019 | [Previous paragraph] M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The error M7019 usually indicates that the device has not returned to the starting location. To resolve this, the device needs to be executed or instructed to return to its original location before proceeding with the task. This information is typically |
KM-ASSYH1-07 | 29 | M7028 | [Previous section] M7028-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The solution for the error "M7028-EMO&&DOOR is open, please check the safety door or emergency stop?" is to verify that the safety door or emergency stop is closed before operating the machine. If the safety door |
KM-ASSYH2-03 | 19 | M7018 | M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | M7018 error usually occurs when the printer's automatic process fails to initiate properly. The solution is to press the reset button or perform a power cycle to restart the printer. |
KM-ASSYH2-03 | 20 | M7019 | M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The solution to the M7019 error is to first execute the device to return to its origin before attempting any further actions. This error occurs when a device is not properly synchronized with its origin, and it requires the device to be returned to |
KM-ASSYH2-03 | 21 | M7020 | M7020-There is product in the left pressing area when starting | Abnormal personnel operation | The solution for the error described as M7020-"There is product in the left pressing area when starting" is to move any obstructions or product out of the left pressing area of the printer before attempting to start the print job. |
KM-ASSYH2-03 | 22 | M7021 | M7021-There is a product in the middle pressing area during startup | Abnormal personnel operation | The M7021 error message indicates that there is a product in the middle pressing area during startup. To resolve the issue, remove the product from the area and check for any potential obstructions or debris that may be causing the issue. If |
KM-ASSYH2-03 | 23 | M7022 | M7022-There is product on the gripper of the right flip area during startup | Abnormal personnel operation | The solution for the error M7022-There is product on the gripper of the right flip area during startup is to remove any items from the gripper and clear the work area before starting the machine. |
KM-ASSYH2-03 | 24 | M7023 | M7023-There is a product on the left slide nozzle when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | The solution for M7023 error is to remove the product from the left slide nozzle and turn off the vacuum suction. |
KM-ASSYH2-03 | 25 | M7024 | M7024-There is a product on the nozzle of the middle slide table when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | To resolve this error, follow these steps: 1. Turn off the vacuum suction and prevent any further products from entering the middle slide table nozzle. 2. Manually remove any existing product from the nozzle. 3 |
KM-ASSYH2-03 | 26 | M7025 | M7025-There is a product on the right nozzle when starting, please take out the product and turn off the vacuum suction | Abnormal personnel operation | M7025 is an error message indicating that there is a product on the right nozzle while starting the vacuum cleaner. To resolve this, disconnect the hose from the suction inlet and press the button to turn off |
KM-ASSYH2-03 | 27 | M7026 | Kazam communication failed | Kazam exception | The solution for the "Kazam communication failed" error may vary depending on the specific cause of the issue. It could be due to an incorrect or outdated configuration, lack of permissions, or connectivity problems. Checking the Kazam server |
KM-ASSYH2-03 | 28 | M7027 | M7027-The machine model has been switched, please reset the belt width adjustment first | Abnormal personnel operation | This error typically occurs when you switch between different machine models and forget to reset the belt width adjustment. To resolve the error, follow these steps: identify the correct belt width for your new machine model, and adjust the belt width accordingly. If you |
KM-ASSYH2-03 | 29 | M7028 | M028-Please remove the TRAY plate from the conveyor belt first | Abnormal personnel operation | The solution to the error M028 is to follow the proper sequence of steps. This includes removing the TRAY plate from the conveyor belt before proceeding further. The system should be designed to ensure the correct order of steps are followed, |
KM-ASSYH2-03 | 34 | M7033 | M7033-The discharging operation of the left working area conveyor belt has timed out, please check sensor X31 | Sensor abnormality | The M7033 error indicates that the discharging operation on the left working area conveyor belt has timed out, and it requires checking sensor X31 for any failure or malfunction. To resolve this issue, you can start |
KM-ASSYH2-03 | 33 | M7032 | M7032-The feeding operation of the left working area conveyor belt has timed out, please check sensor X31 | Sensor abnormality | The solution for the error "M7032-The feeding operation of the left working area conveyor belt has timed out, please check sensor X31" is to investigate and repair or replace the faulty sensor X31, |
KM-ASSYH2-04 | 11 | M7010 | Previous section-M7010 please confirm the status of the work area | Abnormal personnel operation | The solution to the Previous section-M7010 error is to check the work area status by checking the logs or contacting technical support for further assistance. |
KM-ASSYH2-04 | 13 | M7012 | Front section-M7012-CCD compensation host computer has no response | Visual abnormality | The solution for this error varies depending on the specific problem, but generally involves troubleshooting the computer's hardware and software, verifying that all necessary drivers and firmware are up-to-date, and potentially resetting or updating the |
KM-ASSYH2-04 | 14 | M7013 | Front section-M7013-No response from the upper computer in the detection process | Visual abnormality | The solution for "Front section-M7013-No response from the upper computer in the detection process" error is to check the network connection and ensure that the upper computer and the lower computer are communicating properly. Also, ensure that |
KM-ASSYH2-04 | 15 | M7014 | Front section-M7014-No response from scanning QR code host computer | Visual abnormality | The solution to the Front section-M7014-No response from scanning QR code host computer error is to verify that the host computer is properly connected to the internet and that it is running the required software for scanning QR |
KM-ASSYH2-04 | 17 | M7016 | M7016-EMO&&DOOR is open, please check the safety door or emergency stop | Abnormal personnel operation | The M7016-EMO&&DOOR is open error signifies that the safety door or emergency stop is open, which is unsafe. The solution is to ensure that the safety door and emergency stop are properly closed before resuming work |
KM-ASSYH2-04 | 18 | M7017 | M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the M7017-Equipment model setting is abnormal error is to check for invalid or missing values in the model settings, and to update the model accordingly. Additionally, ensure that the equipment model being used is a |
KM-ASSYH2-04 | 19 | M7018 | M7018-Please press the reset button before starting the automatic process | Abnormal personnel operation | M7018 error usually occurs when the printer's automatic process fails to initiate properly. The solution is to press the reset button or perform a power cycle to restart the printer. |
KM-ASSYH2-04 | 20 | M7019 | M7019-The device has not returned to the origin, please execute the device to return to the origin first | Abnormal personnel operation | The solution to the M7019 error is to first execute the device to return to its origin before attempting any further actions. This error occurs when a device is not properly synchronized with its origin, and it requires the device to be returned to |
KM-ASSYH2-04 | 21 | M7020 | Previous section-M7020-Equipment reset abnormality | Electronic control abnormality | The solution for the error "Previous section-M7020-Equipment reset abnormality" would require further information and troubleshooting steps specific to the device or system experiencing the issue. Consulting technical support or referencing |
KM-ASSYH2-04 | 22 | M7021 | Communication abnormality between front-end-M7021-PLC | Electronic control abnormality | Communication abnormality between front-end-M7021-PLC error typically occurs when the front-end device cannot connect to the back-end device, such as a PLC or control system. This issue can be resolved |
KM-ASSYH2-04 | 23 | M7022 | Front segment-M7022-Communication abnormality between front segment and rear segment | Electronic control abnormality | The solution for the error described as Front segment-M7022-Communication abnormality between front segment and rear segment is typically to check and repair any loose connections, cables or components that may be causing the communication issue. |
KM-ASSYH2-04 | 24 | M7023 | Front section-M7023-width-adjustable conveyor belt is not reset | Abnormal personnel operation | The solution for the error "Front section-M7023-width-adjustable conveyor belt is not reset" would involve resetting the conveyor belt to its default width settings. This can typically be done by accessing the settings |
KM-ASSYH2-04 | 25 | M7024 | Front section-M7024-The conveyor belt product cannot return to the origin | Abnormal personnel operation | The solution for the Front section-M7024 error is to ensure the conveyor belt is properly programmed and configured to allow products to return to the origin. This can involve adjusting the control system settings, resetting the belt, |
KM-ASSYH2-04 | 26 | M7025 | Front section-M7025-there is material in the waste discharge area | Abnormal personnel operation | The M7025 error indicates that there is material present in the waste discharge area of the front section of a given device. To solve this issue, the waste discharge area should be cleaned, and any obstructions or materials should be |
KM-ASSYH2-04 | 27 | M7026 | Front section-M7026-return to origin or XY movement downward pressure cylinder is not above | Electronic control abnormality | The error "Front section-M7026-return to origin or XY movement downward pressure cylinder is not above" occurs when the cylinder cannot be lifted because it is not in contact with the floor. A solution can be |
KM-ASSYH2-04 | 28 | M7027 | There is material in the front section-M7027-start secondary positioning platform, please take it out | Abnormal personnel operation | The solution for the error "There is material in the front section-M7027-start secondary positioning platform, please take it out" is removing or adjusting any material or debris that is blocking or impeding the secondary positioning |
KM-ASSYH2-04 | 29 | M7028 | Previous segment-M7028-Buffer area Tray is lost, please restart | Abnormal personnel operation | The solution for the error "Previous segment-M7028-Buffer area Tray is lost, please restart" is to restart the printer. This error occurs when the buffer tray of the printer is full and needs to be cleared before the |
KM-ASSYH2-03 | 1 | M7000 | M7000-Start detecting the presence of materials in the work area | Abnormal personnel operation | To solve the error M7000-Start detecting the presence of materials in the work area, the first step should be to check for any potential sources of contamination such as spills, debris, or dust particles. Once any materials |
KM-ASSYH2-03 | 17 | M7016 | M7016-EMO&&DOOR is open, please check the safety door or emergency stop X30 | Abnormal personnel operation | M7016-EMO&&DOOR is open - error message. |
KM-ASSYH2-03 | 18 | M7017 | M7017-Equipment model setting is abnormal, please set the model | Abnormal personnel operation | The solution for the M7017-Equipment model setting is abnormal error is to check for invalid or missing values in the model settings, and to update the model accordingly. Additionally, ensure that the equipment model being used is a |
KM-ASSYH2-04 | 33 | M7032 | Front section-M7032-Front buffer conveyor belt feeding operation timeout, please check sensor X23 | Sensor abnormality | The solution for the error "Front section-M7032-Front buffer conveyor belt feeding operation timeout, please check sensor X23" is to check the sensor X23 for any issues or faults that may be causing the |
KM-ASSYH2-04 | 34 | M7033 | Front section-M7033-the discharging operation of the front buffer conveyor belt has timed out, please check sensor X23 | Sensor abnormality | The solution for Front section-M7033- timing out error is to check sensor X23 responsible for detecting the arrival of items on the front buffer conveyor belt. If the sensor is malfunctioning or obstructed, |
KM-ASSYH2-04 | 35 | M7034 | Front section-M7034-Work area conveyor belt feeding operation timeout, please check sensor X24 | Sensor abnormality | The solution for the Front section-M7034-Work area conveyor belt feeding operation timeout error is to check sensor X24. This could involve troubleshooting connections or calibration issues, or possibly replacing the sensor entirely. |
KM-ASSYH2-04 | 36 | M7035 | Front section-M7035-The discharging operation of the conveyor belt in the work area has timed out, please check sensor X24 | Sensor abnormality | The solution for this error could involve inspecting and troubleshooting sensor X24 to ensure it is functioning properly. This may involve checking its connections, replacing it if necessary, and calibrating it to ensure accurate operation. Additionally, the |
KM-ASSYH2-04 | 37 | M7036 | Front section-M7036-Work area blocking cylinder is rising abnormally, please check sensor X36 | Sensor abnormality | The solution for the error described as Front section-M7036-Work area blocking cylinder is rising abnormally, please check sensor X36, is likely to involve inspecting the sensor for faults or damaged wiring and |
KM-ASSYH2-04 | 38 | M7037 | Front section-M7037-Work area blocking cylinder is abnormally descending, please check sensor X37 | Sensor abnormality | The solution for the error "Front section-M7037-Work area blocking cylinder is abnormally descending, please check sensor X37" is to verify the functionality of the X37 sensor and ensure that it is |
KM-ASSYH2-04 | 39 | M7038 | Front section-M7038-the working area side positioning cylinder extends abnormally, please check sensor X40 | Sensor abnormality | The solution for the error M7038 is to check the sensor X40. If the sensor is damaged or faulty, you may need to replace it. If the sensor is in good condition, then there may be a problem with |
KM-ASSYH2-04 | 40 | M7039 | Front section-M7039-the working area side positioning cylinder retracts abnormally, please check sensor X41 | Sensor abnormality | The solution for the error Front section-M7039-the working area side positioning cylinder retracts abnormally, please check sensor X41, is to inspect the sensor X41 for any faults or mal |
KM-ASSYH2-04 | 41 | M7040 | Front section-M7040-upper cover side positioning cylinder (front), abnormal extension, please check sensor X43 | Sensor abnormality | The solution for the "Front section-M7040-upper cover side positioning cylinder (front), abnormal extension, please check sensor X43" error, which is related to the extension of the front positioning cylinder |
KM-ASSYH2-04 | 42 | M7041 | Front section-M7041-upper cover side positioning cylinder (front), retraction abnormality, please check sensor X44 | Sensor abnormality | The solution for the error described as Front section-M7041-upper cover side positioning cylinder (front), retraction abnormality, please check sensor X44 involves checking the position of the upper cover side positioning cyl |
KM-ASSYH2-04 | 44 | M7043 | Front section-M7043-upper cover front positioning cylinder-retract (front), retraction is abnormal, please check sensor X46 | Sensor abnormality | The solution for the error "Front section-M7043-upper cover front positioning cylinder-retract (front), retraction is abnormal, please check sensor X46" involves checking sensor X46 to ensure that |
KM-ASSYH2-04 | 45 | M7044 | Front section-M7044-Push PCB cylinder-extend (front), the extension is abnormal, please check sensor X47 | Sensor abnormality | The solution for the error Front section-M7044-Push PCB cylinder-extend (front), abnormal extension, and checking sensor X47 involves physically inspecting and possibly replacing the sensor X47. It may also |
KM-ASSYH2-04 | 46 | M7045 | Front section-M7045-push PCB cylinder-retract (front), retraction is abnormal, please check sensor X50 | Sensor abnormality | The error "Front section-M7045-push PCB cylinder-retract (front), retraction is abnormal, please check sensor X50" describes a problem with a push button PCB cylinder in the computer |
KM-ASSYH2-04 | 48 | M7047 | Front section - M7047 - tilting cylinder - lowering (front), retraction is abnormal, please check sensor X52 | Sensor abnormality | The solution to the error described as Front section - M7047 - tilting cylinder - lowering (front), retraction is abnormal, please check sensor X52 is to ensure the sensor is calibrated and functioning properly |
KM-ASSYH2-04 | 49 | M7048 | Front section-M7048-upper cover side positioning cylinder (middle), abnormal extension, please check sensor X54 | Sensor abnormality | The solution for the Front section-M7048-upper cover side positioning cylinder (middle), abnormal extension, please check sensor X54 error is to repair or replace the faulty sensor (X54) and reset |